BMW Engine Parts for BMW 6 Series F12 (2012+)

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37757295

Part#: 601-0240

Ships in 1-2 days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

AAE Remanufactured High Pressure Fuel Pump - BMW N54 N55 3.0L ...

T#:42200953

Part#: 13517616170RKT

Back Ordered

$ 816.99 USD

Add to Wish List

Qty

$ 816.99 USD

Add to Wish List

This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.

Show More Show Less

Precision Raceworks Replacement Ignition Coil - Blue

T#:4333508

Part#: 201-0091

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Replaces individual coils found in the Precision Raceworks Ignition Kit.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

Ships in 1-2 days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55

T#:38094311

Part#: 201-0188

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

Seamless fit – Compatible with most aftermarket top mount port injection manifolds
Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
Leak-proof design – Dual-seal quick connectors for maximum fuel safety
High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
Easy installation – Direct plug-and-play with factory and aftermarket fuel lines

Show More Show Less

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks ...

T#:38161701

Part#: 101-0257

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

6-micron filtration – Removes fine particles and contaminants to protect engine components
High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
Optimized fuel flow – Maintains consistent fuel delivery for peak performance
Durable construction – Engineered for long-lasting reliability in high-demand applications
Easy replacement – Simple installation for routine maintenance
Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as needed
Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37892104

Part#: 601-0288

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161736

Part#: 201-0405

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Precision Raceworks Replacement Spark Plug Wires - Blue - Set of 6 - ...

T#:3786918

Part#: 201-0002

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The Precision Raceworks N54 N55 Manifold Location Replacement Spark Plug Wires are the same wires that come with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits, featuring low-resistance, high-performance spark plug wires. These wires are 100% custom-designed from the ground up to meet or exceed OEM requirements and feature seals that are both dust and water resistant. These spark plug wires work with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits 601-0021 or 601-0149.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Precision Raceworks N54 N55 High Performance Ignition Kit - OEM Manif...

T#:1271579

Part#: 601-0021

Back Ordered

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Rid your BMW's N54 or N55 engine of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit!

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 1-2 days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Vargas Ignition Coil Kit (Red) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309610

Part#: VTT-COIL-N5X-RED

Ships in 10 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Weistec BMW BMW S63 Billet Oil Filter Cap - Black

T#:22690726

Part#: 01-563-01794-6

Ships in 1 Business Day

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

Direct replacement/bolt in for the S63 and S63TU engines. CNC machined 6061 aluminum Anodized in Black

Precision Raceworks Replacement Ignition Coil - Black

T#:24843089

Part#: 201-0121

Ships in 9 Business Days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Vargas Ignition Coil Kit (Blue) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309605

Part#: VTT-COIL-N5X-BLU

Ships in 4 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Precision Raceworks N54 N55 High Performance Ignition Kit - OEM Manif...

T#:38229099

Part#: 601-0108

In Stock

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Rid your BMW's N54 or N55 engine of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit!

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

2X Entries Into Our F80 M3 Sweepstakes

T#:22196341

Part#: VTTS55CLCNV

Back Ordered

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

Precision Raceworks Universal Adjustable Fuel Pressure Regulator W/ 1...

T#:38195449

Part#: 501-0043

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

PNP Ethanol Sensor Harness For Motiv Re|Flex Plus

T#:38161679

Part#: 201-0410

Ships in 3 Business Days

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.

TurboSmart OPR V2 Oil Pressure Regulator

T#:28504207

Part#: TS-0811-0012

In Stock

10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

10% off MSRP

$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004858

Part#: 201-0261

Back Ordered

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

Precision Raceworks Replacement Spark Plug Wires - Black - Set of 6 -...

T#:38195386

Part#: 201-0129

Ships in 3 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The Precision Raceworks N54 N55 Manifold Location Replacement Spark Plug Wires are the same wires that come with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits, featuring low-resistance, high-performance spark plug wires. These wires are 100% custom-designed from the ground up to meet or exceed OEM requirements and feature seals that are both dust and water resistant. These spark plug wires work with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits 601-0108 or 601-0150.

Show More Show Less

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122266

Part#: VTTFILTERCAPCLR

Ships in 1 Business Day

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Weistec BMW BMW S63 Billet Oil Filter Cap - Red

T#:22690727

Part#: 01-563-02059-1

Ships in 1 Business Day

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

Direct replacement/bolt in for the S63 and S63TU engines. CNC machined 6061 aluminum Anodized in Red

BMW Secondary Pump Activation Harness - BMW E9X F22/23 F3X F8X ...

T#:38094337

Part#: 201-0049

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.

Show More Show Less

AutoTecknic Dry Carbon Charge Cooler Tank Cap Cover - Gloss Finish ...

T#:39971051

Part#: BM-0032

In Stock

$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 64.99

This product was last offered at the strikethrough price on
09-16-2026

$ 57.99 USD

Limited Qty Sale

Add to Wish List

A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Back Ordered

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Replacement Fuel Filter Element - Single Open 10 Micron | Precision R...

T#:38161702

Part#: 101-0256

Ships in 9 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
Versatile use – Perfect for daily driving, street, and high-performance applications
Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as necessary
Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less

AN6 Male Flare/ORB To 5/16" (7.89mm) Female Quick Connect

T#:38094309

Part#: 201-0274

Ships in 5 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?

Show More Show Less

FTP Motorsport Low Temp Oil Thermostat - N54/N55

T#:582222

Part#: SG84006

Ships in 1-3 days

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

This thermostat will open sooner and help to lower the overall oil temperature.

Precision Raceworks N55 "Gauntlet" HPFP Upgrade - BMW N55 3.0L ...

For vehicles with the newer style HPFP driven by the camshaft - Not for vehicles with t...

T#:47164974

Part#: 201-0423

Back Ordered

$ 1,660.00 USD

Add to Wish List

Qty

$ 1,660.00 USD

Add to Wish List

Introducing the N55 Gauntlet High-Pressure Fuel Pump, the latest innovation from Precision Raceworks, built to outperform and provide unmatched value for N55 enthusiasts. Engineered to flow 70% more fuel than stock and 4% more than the original Big Bore, the Gauntlet sets a new standard in high-performance fuel delivery. Whether you’re looking to maximize power or prepare for future upgrades, the Gauntlet HPFP is designed to meet your needs with exceptional performance and reliability. The Gauntlet HPFP supports up to 240 bar fuel rail pressure, providing consistent fuel delivery for even the most demanding applications. Whether you’re running pump gas, E85, or any blend in between, the Gauntlet is proven through over 60,000 miles of on-road testing and dynamic testing on HPFP test benches.

Show More Show Less

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

T#:39971046

Part#: BM-0006-BCG

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.

Show More Show Less

Precision Raceworks N54 N55 Replacement Coil Power Wires (Pack Of 6) ...

For vehicles with Precision Racework Kit 601-0021 or 601-0108 installed (N55 Ignition K...

T#:38195401

Part#: 201-0008

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The BMW N54 / N55 Replacement Coil Power Harness by Precision Raceworks is a high-quality replacement for their High Performance Ignition Kits (601-0021 or 601-0108), designed to improve reliability and deliver consistent power to the ignition coils. Built with premium automotive-grade materials, this harness ensures optimal electrical conductivity, reducing the risk of misfires and performance issues.

Show More Show Less

Precision Raceworks Ethanol Sensor Breakout Harness

T#:35559424

Part#: 201-0411

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

n Ethanol Sensor Breakout Harness provides a clean wiring solution by splitting the signal from your ethanol content sensor between two analyzers, such as an ECU/controller and a gauge or Bluetooth display, without modifying your existing harness.his setup enables real-time ethanol level monitoring and facilitates comprehensive DME/ECU adjustments for enhanced automotive performance.citeturn0search0

Show More Show Less

Blue WG38 Gen V Ultra-Gate 38 - 14PSI

T#:22591972

Part#: TS-0551-1011

In Stock at Vendor

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 6 Bar

T#:38094308

Part#: 601-0261

Ships in 9 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Red - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122280

Part#: TRIPLECAPRED1

In Stock

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

T#:38262759

Part#: 601-0188

In Stock

$ 959.99 USD

Add to Wish List

Qty

$ 959.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi). This means Precision's BMP Port Injection Kit is capable of supporting builds from 500whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Precision Raceworks Coolant Cap Bundle - Blue - Most BMWs from 2016 t...

Must Swap Pressure Relief Valve From PN #17117639021 to New Unit. Other Pressure Relief Valves Will Not Apply

T#:47679258

Part#: 622-0291-BLU

Ships in 9 Business Days

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

The Precision Raceworks Billet Coolant Cap Set is a functional and stunningly stylish way to add a nice touch to any engine bay! These caps come in three color options, so there is always a color that will work for you! Black with Billet Silver, Black with Blue, and the Stealth series (all black). Many people don't realize it, but the OEM caps have a pressure release valve built into them. Oftentimes, aftermarket companies don't know this either or just don't care. But our team cares about proper function just as much as we care about the appearance of every product we design. For pressure relief, our caps incorporate the OEM internals, so you get all the functionality of the original caps, ensuring a safe and reliable system in place. These caps offer superior style and performance-grade components that guarantee a reliable fit every time. Durable billet aluminum construction provides long-lasting protection and dependability that will upgrade your engine bay for years to come. PLEASE NOTE: These do require assembly and swapping the pressure relief valves from your old caps to your new billet caps.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99

This product was last offered at the strikethrough price on
10-05-2026

$ 80.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 89.99

This product was last offered at the strikethrough price on
10-05-2026

$ 80.99 USD

Limited Qty Sale

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 6 Series F12 (2012+)

Sub-Categories

Fuel Filter Replacement Guidelines:

Fuel Filter Replacement Guidelines:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results