BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 6 Series F12 (2012+)

Akrapovic Cat-Back Titanium Exhaust System - Titanium Tips - F12/F13 ...

T#:1362392

Part#: ME-BM/T/5KT1

Back Ordered

$ 11,620.99 USD

Add to Wish List

Qty

$ 11,620.99 USD

Add to Wish List

Akrapovic doesn't disappoint in the sound and engineering of the F87 M2 Competition Evolution exhaust. True to form, their cat-back system sounds exotic and beastly. It's a European supercar sound instead of American muscle. The Akrapovic Evolution exhaust is a high-flowing exhaust system, eliminating restriction from the mid-pipes to the rear muffler. The rear muffler incorporates two bypass valves to tailor the sound level to your needs. The mid-pipes and rear muffler are made from ultra-lightweight titanium with titanium tips. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Titanium tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovi? R&D department, which is responsible for developing truly amazing exhaust system that offer more power, weighs less, and have an EC type-approval stamp at the same time.

Show More Show Less

Akrapovic Cat-Back Titanium Exhaust System - Carbon Fiber Tips - F12/...

T#:1362393

Part#: ME-BM/T/5KT

Back Ordered

$ 11,660.99 USD

Add to Wish List

Qty

$ 11,660.99 USD

Add to Wish List

The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovic R&D department, which is responsible for developing truly amazing exhaust system that offers more power, weighs less, and has an EC type-approval stamp at the same time. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Carbon-fibre tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The Akrapovic system includes muffler valves for both outlets (the stock system only uses one on the driver side). A valve controller and wiring harness are included to operate both valves from the stock wiring. This allows you to preserve the stock operation of the valves in Comfort, Sport, and Sport+ modes.

Show More Show Less

VRSF Replacement Downpipe Gaskets & Hardware

We Price Match - Give Us A Call or Chat!

T#:26038606

Part#: 509010

In Stock

$ 26.00 USD

Add to Wish List

Qty

$ 26.00 USD

Add to Wish List

Ensure a perfect seal for your BMW's OEM, VRSF, or aftermarket high flow downpipes with our high-quality Grade 12 installation hardware and gaskets. Each set includes 4 bolts, nuts, washers, and 2 stainless steel gaskets suitable for N54/N55 engines. Designed for years and models specified below, these components guarantee optimal performance and compatibility. Additionally, turbo to downpipe gaskets and clamps are available separately, along with midpipe gaskets for the S55 engine.

High-quality Grade 12 installation hardware and gaskets
Ensures a perfect seal for OEM, VRSF, or aftermarket downpipes
Suitable for N54/N55 engines
Compatible with specified BMW years and models
Turbo to downpipe gaskets and clamps available separately

Show More Show Less

Universal Stainless Steel Straight Pipe - 2.5" OD - 24" Length ...

10X Entries Into Our F80 M3 Sweepstakes

T#:587358

Part#: TMS24SPKT

In Stock

Sale - Save 25% $ 42.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 42.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.24 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.50" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Overall Length (OAL) is approximately 24.00"

Show More Show Less

Prosport Titanium Exhaust Wrap - 2" x 50

T#:385019

Part#: HEA-WRAPKIT-50

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Show More Show Less

Prosport Gold Heat Reflective Tape - 2" x 15'

T#:385020

Part#: HEA-GWRAP-15

Back Ordered

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Show More Show Less

Universal Exhaust Pipe Reducer - 3" OD To 60mm ID

10X Entries Into Our F80 M3 Sweepstakes

T#:587351

Part#: TMS3060ER2KT

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" OD (Butt) To 60mm ID (slip) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm ID side - 2.25" Length on 3.0" OD side - 3.50"

Show More Show Less

Titanium Exhaust Wrap - 2" X 25'

T#:385025

Part#: HEA-WRAPKIT-25

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Key Features:

2" wide x 1/16" thick
Durable, tightly woven, 100% fiberglass
Reduce under hood temperatures
Protect other engine components
Protect your hands/arms from burns
Each roll comes with 5 FREE, 14" long stainless steel zip ties

Show More Show Less

Bav Auto Oxygen Sensor Tool - Angled Handle - 7/8"

10X Entries Into Our F80 M3 Sweepstakes

T#:580382

Part#: B8800066

In Stock

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.49 USD

Add to Wish List

Slotted, pivoting head has both hexagon and double hexagon drive. Angled handle reaches around obstructions. Fits all Oxygen sensors with 7/8in (22mm) hex.

Universal Stainless Steel 90 Degree Pipe - 3.0" OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587361

Part#: TMS3090PKT

In Stock

Sale - Save 15% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.85 USD

Add to Wish List

Qty

Sale - Save 15%

$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.85 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Minimum Leg Length - 8.25" Bend Radius - 4.75" @ 90° angle

Show More Show Less

Stainless Steel V-Band Clamp - 2.5"

10X Entries Into Our F80 M3 Sweepstakes

T#:587344

Part#: TMS25VBKT

In Stock

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD

Add to Wish List

Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 2.5" inside diameter (ID) to slip over a 2.5" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Universal Exhaust Pipe Reducer - 3" ID To 65mm OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587349

Part#: TMS3065ERKT

Ships on Feb 18, 2027

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip fit) X 65mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 65mm OD side - 2.25" Length on 3.0" ID side - 3.50"

Show More Show Less

Universal Stainless Steel J-Pipe - 2.5" OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587362

Part#: TMS25JPKT

In Stock

Sale - Save 5% $ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.5" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 3.50" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 5.50" Leg Length "C" - 7.0"

Show More Show Less

Stainless Steel V-Band Clamp - 3.0"

10X Entries Into Our F80 M3 Sweepstakes

T#:587341

Part#: TMS30VBKT

In Stock

$ 54.99

This product was last offered at the strikethrough price on
10-07-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 3.0" inside diameter (ID) to slip over a 3.0" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Walker Oxygen Sensor - Downstream - F22 M235, F3X 335/435, F06/F12 64...

from 7/2013 production date

T#:31324163

Part#: 11787645875

Ships in 1 Business Day

$ 101.99

This product was last offered at the strikethrough price on
04-14-2026

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

Show More Show Less

Universal Exhaust Pipe Reducer - 3" ID To 60mm OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587350

Part#: TMS3060ER1KT

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip) To 60mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm OD side - 2.25" Length on 3.0" ID side - 3.50"

Show More Show Less

Bav Auto Extra Long Oxygen Sensor Tool - 1/2" Drive, 7/8" x 6" ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580383

Part#: B8800067

In Stock

Sale - Save 20% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

This 1/2" Drive, 7/8" x 6" Extra Long O2 sensor tool is used to remove difficult to reach oxygen sensors.

Dinan Exhaust Valve Remote - Most BMWs 2012+

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:600153

Part#: R660-0001

Ships in 3 Business Days

Sale - Save 10% $ 318.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 287.06 USD

Add to Wish List

Qty

Sale - Save 10%

$ 318.99

This product was last offered at the strikethrough price on
09-29-2026

$ 287.06 USD

Add to Wish List

The Dinan Exhaust Valve Remote lets you override the factory exhaust valve operation and fully open (or close) the valve at the press of a button. Directly compatible with 'F' and 'G' chassis BMW's using a single electronic valve as well as 3rd generation MINI's, the Dinan Exhaust Valve Remote Kit is robust in its potential applications. Once installed simply press the top button of the supplied wireless remote to open the valve fully and enjoy maximum aural pleasure. Alternatively, when the need arises for the exhaust to be as quiet as possible, press the bottom button on the remote and the valve will close. This system works with both the factory exhaust and any aftermarket system that utilizes the factory electronic exhaust valve actuator. Tested and compatible valve actuators include BMW P/N's 18307851568, 18308686640, 18308632154, and 18308623424. Features: Opens the factory electronic exhaust valve with the push of a button. Wirelessly remote controlled. Weatherproof housing. Extra length wiring harnesses for maximum application and routing versatility.

Show More Show Less

F06 M6 GranCoupe Stainless Axle-Back Exhaust - Black Tips

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389145

Part#: D660-0049-BLK

Ships in 3 Business Days

Sale - Save 39% $ 2,254.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,375.16 USD

Add to Wish List

Qty

Sale - Save 39%

$ 2,254.99

This product was last offered at the strikethrough price on
06-24-2026

$ 1,375.16 USD

Add to Wish List

Gold Heat Reflective Tape - 2" x 30

T#:385021

Part#: HEA-GWRAP-30

Ships in 1 Business Day

$ 56.99 USD

Add to Wish List

Qty

$ 56.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Key Features:

Can handle temperatures up to 850 Degrees Fahrenheit
UV resistant
Light weight easy to apply
Protect sensitive engine components
Cut to size
Engine accent/dress up

Show More Show Less

Prosport Fiberglass Exhaust Wrap - Black - 2" x 50'

T#:385018

Part#: HEA-WRAPKIT-BLK

Ships in 10 Business Days

$ 28.00 USD

Add to Wish List

Qty

$ 28.00 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

Prosport Fiberglass Exhaust Wrap - White - 2" x 50'

T#:385017

Part#: HEA-WRAPKIT-WHT

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

Dinan Heavy Duty Exhaust Band Clamp - 2.75" (70mm)

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:38688901

Part#: D662-9228

In Stock

Sale - Save 13% $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.14 USD

Add to Wish List

Qty

Sale - Save 13%

$ 21.99

This product was last offered at the strikethrough price on
09-29-2026

$ 19.14 USD

Add to Wish List

Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 70mm (2.75") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.

Show More Show Less

VRSF 4" Turbo to Downpipe Clamp - BMW

We Price Match - Give Us A Call or Chat!

T#:2839845

Part#: 505040

Back Ordered

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

4" Turbo to Downpipe Clamp for 4" Downpipes

Bav Auto Exhaust Doughnut Stretcher

10X Entries Into Our F80 M3 Sweepstakes

T#:580373

Part#: B8800051

In Stock

Sale - Save 25% $ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD

Add to Wish List

This tool is not vehicle specific and is a universal tool that may or may not work on all applications. This exhaust doughnut stretcher features an offset J-hook to grab onto the rubber rings used to mount most BMW exhaust systems. Features a large coated handle for a comfortable grip.

Show More Show Less

Bosch Oxygen Sensor Set - Pre and Post Catalytic Converter - N55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:55857772

Part#: 11787589475KT2

In Stock

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

Extreme exhaust heat and carbon buildup degrade your factory oxygen sensors over time, sending lazy data to your DME and robbing you of performance.

Stainless Steel Weld-In Oxygen Sensor Bung - M18x1.5mm

10X Entries Into Our F80 M3 Sweepstakes

T#:587345

Part#: TMS02BUNGKT

Ships on Nov 3, 2026

Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Finish your custom exhaust with this T304 stainless steel weld-in oxygen sensor bung. PART DESIGN CNC-cut from T304 Stainless Steel for corrosion resistance Radiused to match 2.50"-3.00" OD tubing for ease of welding Threaded for M18x1.5mm RH oxygen sensors INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

VRSF Replacement Chargepipe Methanol/Water Injection Bung Plug for 07...

Fits N54/ N55/ N20/ N26/ S55/ B58 Engines from 2007-2016

We Price Match - Give Us A Call or Chat!

T#:35154903

Part#: 504010

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

This plug is a replacement for the following models: 10901020A, 10901020B, 10901020C, 10901020D, 10301050, 10101020 and any other VRSF chargepipe that utilizes a water injection bung. VRSF Replacement Chargepipe Methanol/Water Injection Bung Plug for 07-16 BMW N54/ N55/ N20/ N26/ S55/ B58 is a crucial component for maintaining peak performance in turbocharged BMW engines. Designed to prevent boost leaks and ensure a secure seal for methanol and water injection ports, this bung plug is crafted from premium materials for long-lasting reliability. Compatible with VRSF chargepipes, it is an ideal solution for BMW enthusiasts seeking precision and durability in their high-performance setups. Available through Turner Motorsport, this part ensures seamless integration with your BMW's engine components.

Benefits: Ensures a secure seal for methanol and water injection ports to prevent boost leaks Built from high-quality materials for superior strength and longevity Compatible with VRSF chargepipes on 07-16 BMW N54, N55, N20, N26, S55, and B58 engines Easy installation minimizes downtime and simplifies engine upgrades Maintains optimal turbo efficiency and performance in high-pressure systems The VRSF Replacement Chargepipe Methanol/Water Injection Bung Plug for 07-16 BMW N54/ N55/ N20/ N26/ S55/ B58 is the ultimate choice for BMW owners committed to maximizing reliability and performance.

Show More Show Less

Gold Heat Reflective Sheet - 20" x 20"

T#:385022

Part#: HEA-GWRAP-20X20

Ships in 1 Business Day

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Key Features:

Can handle temperatures up to 850 Degrees Fahrenheit
UV resistant
Light weight easy to apply
Protect sensitive engine components
Cut to size
Engine accent/dress up

Show More Show Less

Active Autowerke S63 N63 A-Flow Catted Downpipes

For 2014+ model years only

T#:51075079

Part#: 11-041A

Ships in 3 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

For the BMW owner seeking increased performance without the drawbacks of a "catless" system, the Active Autowerke Aflow Catted Downpipes offer the perfect solution. These downpipes feature high-flow metallic catalytic converters that are specifically designed to maintain exhaust efficiency while preventing the dreaded Check Engine Light (CEL). Unlike track-only pipes that can produce raw fuel odors and cabin drone, the Aflow series maintains a sophisticated, refined exhaust note suitable for a luxury daily driver. Each set is custom-made in-house to ensure an exact bolt-on fit, providing a reliable solution that satisfies both the driver’s demand for power and the vehicle’s onboard diagnostic requirements. Key Features: No CEL Guarantee: Advanced Aflow catalyst technology prevents catalytic efficiency dashboard warnings. Refined Exhaust Note: Provides an aggressive V8 growl while maintaining cabin comfort for daily use. Bolt-On Installation: No cutting or welding required; replaces the bulky factory units directly. Thermal Resilience: Built to withstand the high temperatures generated by the S63 and N63 twin-turbo engines. Safe for Occupants: Reduces harmful emissions and raw exhaust odors compared to catless alternatives. Specifications: Primary Material: Brushed 304 Stainless Steel Fitting: Direct OEM Replacement (Bolt-on) Manufacturing Location: Hand-made in Miami, FL Weight Reduction: Lighter than the heavy, ceramic-core factory catalytic converters Surface Finish: Natural Stainless Lead Time: Custom made-to-order (Approx. 2 weeks)

Show More Show Less

Active Autowerke Catted Downpipes - F10/F12 M5/M6 S63

T#:51075064

Part#: 11-093

Ships in 3 Business Days

$ 2,849.00 USD

Add to Wish List

Qty

$ 2,849.00 USD

Add to Wish List

The Active Autowerke Signature GESI Catted Downpipes offer the perfect balance of raw performance and street-legal refinement. Unlike "catless" alternatives that cause unpleasant fuel odors and dashboard error lights, this system utilizes EPA-registered GESI high-flow catalytic converters. These proprietary converters use precious metal loading technology to significantly reduce emissions, ensuring your BMW remains OBD2 compliant and "Check Engine Light" free. Designed as a direct bolt-on replacement for F-Chassis BMW X5M, X6M, and 550i/650i models, these downpipes feature cast upper stainless steel V-bands for a factory-perfect seal. Whether you are cruising or under wide-open throttle, the system maintains a sophisticated exhaust note while safely protecting both passengers and the environment from harmful fumes. Key Features: NO CEL Guarantee: Advanced GESI technology ensures no catalytic efficiency codes under normal operation. Refined Sound & Scent: Eliminates the "raw fuel" odor associated with track-only downpipes. 49-State Legal: EPA registered and fully OBD2 compliant (excludes California). Precision Fitment: Cast upper V-bands ensure a leak-free connection to the turbo housing. OEM Integration: Easily bolts on with no cutting, welding, or permanent vehicle modification required. Specifications: Construction: Heavy-duty 304 Stainless Steel Inlet Connection: Precision-cast V-Band flange Catalyst Size: 4.5-inch Ultra High Flow unit Efficiency: Reaches full efficiency in under 10 seconds from cold start Compliance: Fully OBD2 compliant (1996 and newer vehicles) Application Note: Requires VIN for fitment verification; not compatible with G-chassis N63B engines.

Show More Show Less

Active Autowerke GESI Catted Downpipes - S63 N63

For 2014+ model years only

T#:397488

Part#: 11-041

Ships in 3 Business Days

5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Qty

5% off MSRP

$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Active Autowerke is proud to bring you our hand made Signature S63/N63 Downpipes for the twin-turbo V8 BMW X5M, X6M, 550i, 650i, X5, X6 models. This variant includes a pair of 4.5" ultra high flow GESI catalytic converter that will NOT produce a CEL!

Show More Show Less

Dinan Heavy Duty Exhaust Band Clamp - 3.00" (76mm)

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:38688902

Part#: D662-9237

Special Order: No Guaranteed ETA

Sale - Save 13% $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.14 USD

Add to Wish List

Qty

Sale - Save 13%

$ 21.99

This product was last offered at the strikethrough price on
09-29-2026

$ 19.14 USD

Add to Wish List

Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 76mm (3") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.

Show More Show Less

F06 M6 GranCoupe Stainless Axle-Back Exhaust - Polished Tips ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389144

Part#: D660-0049

Back Ordered

Sale - Save 10% $ 1,999.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,799.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,999.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,799.96 USD

Add to Wish List

Turner 4" Universal Double Wall Exhaust Tip w/ Brushed Finish ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:599666

Part#: 026374TMS02-10

In Stock

Sale - Save 20% $ 63.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 63.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.19 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 4.0" Outer Diameter Brushed Finish Double Wall Construction Angle Cut Style Includes Stainless Steel Exhaust Clamp

Show More Show Less

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Ste...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:3047555

Part#: 026732TMS03-13

In Stock

Sale - Save 10% $ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 146.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 146.69 USD

Add to Wish List

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Show More Show Less

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Ste...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:5189169

Part#: 026732TMS02-13

In Stock

Sale - Save 10% $ 173.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 173.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.59 USD

Add to Wish List

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
Rolled Angle Design: Provides a stylish and aggressive appearance.
Stepped Left Design: Ensures a precise fit and a distinctive look.
3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
Durable Construction: Built to withstand the elements and maintain its shine.

Show More Show Less

3.5" Universal Brushed Aluminum Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:13957902

Part#: 049478LA03-04

In Stock

Sale - Save 10% $ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.29 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3.5 OD - Step...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642112

Part#: 026732TMS03-10

In Stock

Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Introducing the beautiful Titanium Black Chrome Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads! Universal / custom fit. Not direct replacement of factory tips on factory exhaust. Must measure your existing pipe diameter and clearance.

Show More Show Less

3.5" Universal Black Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:39802151

Part#: 049478LA03-02

In Stock

Sale - Save 10% $ 69.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 69.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.99 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner 3.5" Universal Single Wall Exhaust Tip w/ Brushed Finish ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:599664

Part#: 026374TMS04-01

In Stock

Sale - Save 10% $ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 64.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 64.79 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 3.5" Outer Diameter Brushed Finish Single Wall Construction Straight Cut Style Includes Stainless Steel Exhaust Clamp

Show More Show Less

Turner Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3.5 OD - Step...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642111

Part#: 026732TMS03-11

Ships on Oct 29, 2026

Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Introducing the beautiful Titanium Black Chrome Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design sure to turn heads!

4.0" Universal Black Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:39802152

Part#: 049478LA01-02

In Stock

$ 68.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 68.99 USD

Limited Qty Sale

Add to Wish List

Universal 2.5" inlet to 4.0" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642119

Part#: 026732TMS06-17

In Stock

Sale - Save 53% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD

Add to Wish List

Qty

Sale - Save 53%

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.5 Inlet - 3.0...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642109

Part#: 026732TMS02-01

Ships on Oct 29, 2026

Sale - Save 15% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.39 USD

Add to Wish List

Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!

Show More Show Less

3.5" Universal Mirror Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:16109206

Part#: 049478LA03-01

In Stock

Sale - Save 5% $ 66.99

This product was last offered at the strikethrough price on
06-14-2026

$ 63.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 66.99

This product was last offered at the strikethrough price on
06-14-2026

$ 63.64 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner 4" Double Wall Exhaust Tip - Polished Black Chrome Finish ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:5175767

Part#: 026374TMS01-08

In Stock

Sale - Save 21% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.99 USD

Add to Wish List

Qty

Sale - Save 21%

$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.99 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Straight Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Rolled Angle Tip - 2.75 Inlet 3.0 OD - ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642113

Part#: 026732TMS03-07

In Stock

Sale - Save 39% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.00 USD

Add to Wish List

Qty

Sale - Save 39%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.00 USD

Add to Wish List

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous black chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips! Other Features Include: 2.75 Inlet 3.0 Outer Diameter 7" Combined Width Black Chrome Left Stepped Design Double Wall Design Rolled Angle 290mm overall lenth

Show More Show Less

Double Wall Slash Cut Exhaust Tip - 3.0 Inlet - 3.5 OD - Stepped Righ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642120

Part#: 026732TMS02-17

In Stock

Sale - Save 31% $ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD

Add to Wish List

Qty

Sale - Save 31%

$ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD

Add to Wish List

Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!

Show More Show Less

Turner Motorsport BMW Double Wall Slash Cut Exhaust Tip - 2.5 Inlet -...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:2119655

Part#: 026732TMS06-01

In Stock

Sale - Save 10% $ 128.99

This product was last offered at the strikethrough price on
06-14-2026

$ 116.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 128.99

This product was last offered at the strikethrough price on
06-14-2026

$ 116.09 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a slash cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 6 Series F12 (2012+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results