BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 6 Series F12 (2012+)

Akrapovic Cat-Back Titanium Exhaust System - Titanium Tips - F12/F13 ...

T#:1362392

Part#: ME-BM/T/5KT1

Back Ordered

$ 11,620.99 USD

Add to Wish List

Qty

$ 11,620.99 USD

Add to Wish List

Akrapovic doesn't disappoint in the sound and engineering of the F87 M2 Competition Evolution exhaust. True to form, their cat-back system sounds exotic and beastly. It's a European supercar sound instead of American muscle. The Akrapovic Evolution exhaust is a high-flowing exhaust system, eliminating restriction from the mid-pipes to the rear muffler. The rear muffler incorporates two bypass valves to tailor the sound level to your needs. The mid-pipes and rear muffler are made from ultra-lightweight titanium with titanium tips. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Titanium tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovi? R&D department, which is responsible for developing truly amazing exhaust system that offer more power, weighs less, and have an EC type-approval stamp at the same time.

Show More Show Less

Akrapovic Cat-Back Titanium Exhaust System - Carbon Fiber Tips - F12/...

T#:1362393

Part#: ME-BM/T/5KT

Back Ordered

$ 11,660.99 USD

Add to Wish List

Qty

$ 11,660.99 USD

Add to Wish List

The 2012+ F12 M6 is one of the most impressive road cars ever created and the Akrapovic Evolution exhaust is the perfect enhancement. The new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovic R&D department, which is responsible for developing truly amazing exhaust system that offers more power, weighs less, and has an EC type-approval stamp at the same time. Mid "Link" Pipes: The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. Muffler: The latest addition to the BMW M series is the awe-inspiring M2 Competition, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium – with some parts cast in Akrapovič’s own foundry – this system will reduce the exhaust system's weight by over 45% and deliver extra power and lower backpressure. The sound has also been enhanced by Akrapovič’s engineers, delivering a true sporty tone especially in the middle and upper rpm range but without any droning. Carbon-fibre tailpipes give an added look to the rear of the M2 Competition to display its sporting potential. The Akrapovic system includes muffler valves for both outlets (the stock system only uses one on the driver side). A valve controller and wiring harness are included to operate both valves from the stock wiring. This allows you to preserve the stock operation of the valves in Comfort, Sport, and Sport+ modes.

Show More Show Less

Universal Stainless Steel Straight Pipe - 2.5" OD - 24" Length ...

10X Entries Into Our F80 M3 Sweepstakes

T#:587358

Part#: TMS24SPKT

In Stock

Sale - Save 25% $ 42.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 42.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.24 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.50" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Overall Length (OAL) is approximately 24.00"

Show More Show Less

Prosport Titanium Exhaust Wrap - 2" x 50

T#:385019

Part#: HEA-WRAPKIT-50

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Show More Show Less

Prosport Gold Heat Reflective Tape - 2" x 15'

T#:385020

Part#: HEA-GWRAP-15

Back Ordered

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Show More Show Less

Universal Exhaust Pipe Reducer - 3" OD To 60mm ID

10X Entries Into Our F80 M3 Sweepstakes

T#:587351

Part#: TMS3060ER2KT

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" OD (Butt) To 60mm ID (slip) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm ID side - 2.25" Length on 3.0" OD side - 3.50"

Show More Show Less

Titanium Exhaust Wrap - 2" X 25'

T#:385025

Part#: HEA-WRAPKIT-25

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!

Key Features:

2" wide x 1/16" thick
Durable, tightly woven, 100% fiberglass
Reduce under hood temperatures
Protect other engine components
Protect your hands/arms from burns
Each roll comes with 5 FREE, 14" long stainless steel zip ties

Show More Show Less

Stainless Steel V-Band Clamp - 2.5"

10X Entries Into Our F80 M3 Sweepstakes

T#:587344

Part#: TMS25VBKT

In Stock

Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD

Add to Wish List

Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 2.5" inside diameter (ID) to slip over a 2.5" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Universal Stainless Steel 90 Degree Pipe - 3.0" OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587361

Part#: TMS3090PKT

In Stock

Sale - Save 15% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.85 USD

Add to Wish List

Qty

Sale - Save 15%

$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.85 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Minimum Leg Length - 8.25" Bend Radius - 4.75" @ 90° angle

Show More Show Less

Universal Exhaust Pipe Reducer - 3" ID To 65mm OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587349

Part#: TMS3065ERKT

Ships on Feb 18, 2027

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip fit) X 65mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 65mm OD side - 2.25" Length on 3.0" ID side - 3.50"

Show More Show Less

Stainless Steel V-Band Clamp - 3.0"

10X Entries Into Our F80 M3 Sweepstakes

T#:587341

Part#: TMS30VBKT

In Stock

$ 54.99

This product was last offered at the strikethrough price on
10-07-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 3.0" inside diameter (ID) to slip over a 3.0" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Universal Stainless Steel J-Pipe - 2.5" OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587362

Part#: TMS25JPKT

In Stock

Sale - Save 5% $ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.5" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 3.50" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 5.50" Leg Length "C" - 7.0"

Show More Show Less

Universal Exhaust Pipe Reducer - 3" ID To 60mm OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587350

Part#: TMS3060ER1KT

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD

Add to Wish List

Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip) To 60mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm OD side - 2.25" Length on 3.0" ID side - 3.50"

Show More Show Less

Universal Stainless Steel J-Pipe - 3.0" OD

10X Entries Into Our F80 M3 Sweepstakes

T#:587363

Part#: TMS30JPKT

Back Ordered

Sale - Save 5% $ 53.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 5%

$ 53.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.29 USD

Add to Wish List

Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 5.0" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 9.50" Leg Length "C" - 10.5"

Show More Show Less

Dinan Exhaust Valve Remote - Most BMWs 2012+

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:600153

Part#: R660-0001

Ships in 3 Business Days

Sale - Save 10% $ 318.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 287.06 USD

Add to Wish List

Qty

Sale - Save 10%

$ 318.99

This product was last offered at the strikethrough price on
09-29-2026

$ 287.06 USD

Add to Wish List

The Dinan Exhaust Valve Remote lets you override the factory exhaust valve operation and fully open (or close) the valve at the press of a button. Directly compatible with 'F' and 'G' chassis BMW's using a single electronic valve as well as 3rd generation MINI's, the Dinan Exhaust Valve Remote Kit is robust in its potential applications. Once installed simply press the top button of the supplied wireless remote to open the valve fully and enjoy maximum aural pleasure. Alternatively, when the need arises for the exhaust to be as quiet as possible, press the bottom button on the remote and the valve will close. This system works with both the factory exhaust and any aftermarket system that utilizes the factory electronic exhaust valve actuator. Tested and compatible valve actuators include BMW P/N's 18307851568, 18308686640, 18308632154, and 18308623424. Features: Opens the factory electronic exhaust valve with the push of a button. Wirelessly remote controlled. Weatherproof housing. Extra length wiring harnesses for maximum application and routing versatility.

Show More Show Less

F06 M6 GranCoupe Stainless Axle-Back Exhaust - Black Tips

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389145

Part#: D660-0049-BLK

Ships in 3 Business Days

Sale - Save 39% $ 2,254.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,375.16 USD

Add to Wish List

Qty

Sale - Save 39%

$ 2,254.99

This product was last offered at the strikethrough price on
06-24-2026

$ 1,375.16 USD

Add to Wish List

Prosport Fiberglass Exhaust Wrap - White - 2" x 50'

T#:385017

Part#: HEA-WRAPKIT-WHT

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

Gold Heat Reflective Tape - 2" x 30

T#:385021

Part#: HEA-GWRAP-30

Ships in 1 Business Day

$ 56.99 USD

Add to Wish List

Qty

$ 56.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Key Features:

Can handle temperatures up to 850 Degrees Fahrenheit
UV resistant
Light weight easy to apply
Protect sensitive engine components
Cut to size
Engine accent/dress up

Show More Show Less

Prosport Fiberglass Exhaust Wrap - Black - 2" x 50'

T#:385018

Part#: HEA-WRAPKIT-BLK

Ships in 10 Business Days

$ 28.00 USD

Add to Wish List

Qty

$ 28.00 USD

Add to Wish List

Constructed of durable, tight-woven fiberglass, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility.

Show More Show Less

F06/F13 M6 GranCoupe Dinan Sport Axle-Back Exhaust

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389148

Part#: F06M6-D660

Back Ordered

Sale - Save 10% $ 1,999.99

This product was last offered at the strikethrough price on
09-28-2026

Starting at $ 1,799.96 USD

Add to Wish List

Sale - Save 10%

$ 1,999.99

This product was last offered at the strikethrough price on
09-28-2026

Starting at $ 1,799.96 USD

Add to Wish List

Dinan sport mufflers are designed to compliment the M6 and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Four 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6

Show More Show Less

Dinan Heavy Duty Exhaust Band Clamp - 2.75" (70mm)

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:38688901

Part#: D662-9228

In Stock

Sale - Save 13% $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.14 USD

Add to Wish List

Qty

Sale - Save 13%

$ 21.99

This product was last offered at the strikethrough price on
09-29-2026

$ 19.14 USD

Add to Wish List

Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 70mm (2.75") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.

Show More Show Less

Stainless Steel Weld-In Oxygen Sensor Bung - M18x1.5mm

10X Entries Into Our F80 M3 Sweepstakes

T#:587345

Part#: TMS02BUNGKT

Ships on Nov 3, 2026

Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD

Add to Wish List

Finish your custom exhaust with this T304 stainless steel weld-in oxygen sensor bung. PART DESIGN CNC-cut from T304 Stainless Steel for corrosion resistance Radiused to match 2.50"-3.00" OD tubing for ease of welding Threaded for M18x1.5mm RH oxygen sensors INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.

Show More Show Less

Gold Heat Reflective Sheet - 20" x 20"

T#:385022

Part#: HEA-GWRAP-20X20

Ships in 1 Business Day

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.

Key Features:

Can handle temperatures up to 850 Degrees Fahrenheit
UV resistant
Light weight easy to apply
Protect sensitive engine components
Cut to size
Engine accent/dress up

Show More Show Less

Dinan Heavy Duty Exhaust Band Clamp - 3.00" (76mm)

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:38688902

Part#: D662-9237

Special Order: No Guaranteed ETA

Sale - Save 13% $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.14 USD

Add to Wish List

Qty

Sale - Save 13%

$ 21.99

This product was last offered at the strikethrough price on
09-29-2026

$ 19.14 USD

Add to Wish List

Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 76mm (3") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.

Show More Show Less

F06 M6 GranCoupe Stainless Axle-Back Exhaust - Polished Tips ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389144

Part#: D660-0049

Back Ordered

Sale - Save 10% $ 1,999.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,799.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,999.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,799.96 USD

Add to Wish List

Turner 4" Universal Double Wall Exhaust Tip w/ Brushed Finish ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:599666

Part#: 026374TMS02-10

In Stock

Sale - Save 20% $ 63.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 63.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.19 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 4.0" Outer Diameter Brushed Finish Double Wall Construction Angle Cut Style Includes Stainless Steel Exhaust Clamp

Show More Show Less

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Ste...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:3047555

Part#: 026732TMS03-13

In Stock

Sale - Save 10% $ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 146.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 146.69 USD

Add to Wish List

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Show More Show Less

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Ste...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:5189169

Part#: 026732TMS02-13

In Stock

Sale - Save 10% $ 173.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 173.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.59 USD

Add to Wish List

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
Rolled Angle Design: Provides a stylish and aggressive appearance.
Stepped Left Design: Ensures a precise fit and a distinctive look.
3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
Durable Construction: Built to withstand the elements and maintain its shine.

Show More Show Less

3.5" Universal Brushed Aluminum Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:13957902

Part#: 049478LA03-04

In Stock

Sale - Save 10% $ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.29 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3.5 OD - Step...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642112

Part#: 026732TMS03-10

In Stock

Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Introducing the beautiful Titanium Black Chrome Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads! Universal / custom fit. Not direct replacement of factory tips on factory exhaust. Must measure your existing pipe diameter and clearance.

Show More Show Less

3.5" Universal Black Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:39802151

Part#: 049478LA03-02

In Stock

Sale - Save 10% $ 69.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 69.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.99 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner 3.5" Universal Single Wall Exhaust Tip w/ Brushed Finish ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:599664

Part#: 026374TMS04-01

In Stock

Sale - Save 10% $ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 64.79 USD

Add to Wish List

Qty

Sale - Save 10%

$ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 64.79 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 3.5" Outer Diameter Brushed Finish Single Wall Construction Straight Cut Style Includes Stainless Steel Exhaust Clamp

Show More Show Less

Turner Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3.5 OD - Step...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642111

Part#: 026732TMS03-11

Ships on Oct 29, 2026

Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD

Add to Wish List

Introducing the beautiful Titanium Black Chrome Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design sure to turn heads!

4.0" Universal Black Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:39802152

Part#: 049478LA01-02

In Stock

$ 68.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 68.99 USD

Limited Qty Sale

Add to Wish List

Universal 2.5" inlet to 4.0" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642119

Part#: 026732TMS06-17

In Stock

Sale - Save 53% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD

Add to Wish List

Qty

Sale - Save 53%

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.5 Inlet - 3.0...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642109

Part#: 026732TMS02-01

Ships on Oct 29, 2026

Sale - Save 15% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.39 USD

Add to Wish List

Qty

Sale - Save 15%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.39 USD

Add to Wish List

Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!

Show More Show Less

3.5" Universal Mirror Chrome Swivel Exhaust Tip

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:16109206

Part#: 049478LA03-01

Ships in 9 Business Days

Sale - Save 5% $ 66.99

This product was last offered at the strikethrough price on
06-14-2026

$ 63.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 66.99

This product was last offered at the strikethrough price on
06-14-2026

$ 63.64 USD

Add to Wish List

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner 4" Double Wall Exhaust Tip - Polished Black Chrome Finish ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:5175767

Part#: 026374TMS01-08

In Stock

Sale - Save 21% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.99 USD

Add to Wish List

Qty

Sale - Save 21%

$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.99 USD

Add to Wish List

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Straight Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Rolled Angle Tip - 2.75 Inlet 3.0 OD - ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642113

Part#: 026732TMS03-07

In Stock

Sale - Save 39% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.00 USD

Add to Wish List

Qty

Sale - Save 39%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.00 USD

Add to Wish List

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous black chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips! Other Features Include: 2.75 Inlet 3.0 Outer Diameter 7" Combined Width Black Chrome Left Stepped Design Double Wall Design Rolled Angle 290mm overall lenth

Show More Show Less

Double Wall Slash Cut Exhaust Tip - 3.0 Inlet - 3.5 OD - Stepped Righ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642120

Part#: 026732TMS02-17

In Stock

Sale - Save 31% $ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD

Add to Wish List

Qty

Sale - Save 31%

$ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD

Add to Wish List

Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!

Show More Show Less

Turner Motorsport BMW Double Wall Slash Cut Exhaust Tip - 2.5 Inlet -...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:2119655

Part#: 026732TMS06-01

In Stock

Sale - Save 10% $ 128.99

This product was last offered at the strikethrough price on
06-14-2026

$ 116.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 128.99

This product was last offered at the strikethrough price on
06-14-2026

$ 116.09 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a slash cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner Motorsport Double Wall Slash Cut - 2.5 Inlet 3.0 OD - Stepped ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:2119656

Part#: 026732TMS06-02

In Stock

Sale - Save 26% $ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 92.99 USD

Add to Wish List

Qty

Sale - Save 26%

$ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 92.99 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed finish and features a slash cut, stepped design. The brushed finish and slash cut design is sure to turn heads!

Show More Show Less

Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642118

Part#: 026732TMS06-16

In Stock

Sale - Save 15% $ 152.99

This product was last offered at the strikethrough price on
06-14-2026

$ 130.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 152.99

This product was last offered at the strikethrough price on
06-14-2026

$ 130.04 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner - Single Wall Straight Cut Exhaust Tip - 2.5 Inlet - 3.0 OD - ...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642108

Part#: 026732TMS01-02

Ships on Oct 29, 2026

Sale - Save 31% $ 101.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.99 USD

Add to Wish List

Qty

Sale - Save 31%

$ 101.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.99 USD

Add to Wish List

Introducing the beautiful Brushed Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed finish and features a straight cut, stepped design. The brushed finish and slash cut design is sure to turn heads!

Show More Show Less

Turner - 3.5" Black Chrome Swivel Exhaust Tips - Set of 2

10X Entries Into Our F80 M3 Sweepstakes

T#:39802150

Part#: 049478LA03-02KT

In Stock

Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.98 USD

Add to Wish List

Qty

Sale - Save 10%

$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.98 USD

Add to Wish List

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.5 Inlet - 3.0...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642107

Part#: 026732TMS02-02

In Stock

Sale - Save 10% $ 126.99

This product was last offered at the strikethrough price on
06-14-2026

$ 114.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 126.99

This product was last offered at the strikethrough price on
06-14-2026

$ 114.29 USD

Add to Wish List

Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!

Show More Show Less

Turner 3.5" Brushed Aluminum Swivel Exhaust Tips - Set of 2

Can be used on any 2.5" exhaust piping. Measure before ordering.

10X Entries Into Our F80 M3 Sweepstakes

T#:21275555

Part#: 049478LA03-04KT

In Stock

Sale - Save 10% $ 113.98

This product was last offered at the strikethrough price on
06-14-2026

$ 102.58 USD

Add to Wish List

Qty

Sale - Save 10%

$ 113.98

This product was last offered at the strikethrough price on
06-14-2026

$ 102.58 USD

Add to Wish List

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3....

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642115

Part#: 026732TMS06-07

In Stock

Sale - Save 39% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 74.02 USD

Add to Wish List

Qty

Sale - Save 39%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 74.02 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a slash cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner - Dual Tip Double Wall Slash Cut Exhaust Tip - 3.0 Inlet - 3.5...

10X Entries Into Our F80 M3 Sweepstakes
Not vehicle specific. You MUST measure prior to purchasing!

T#:9642117

Part#: 026732TMS02-16

In Stock

Sale - Save 10% $ 133.99

This product was last offered at the strikethrough price on
06-14-2026

$ 120.59 USD

Add to Wish List

Qty

Sale - Save 10%

$ 133.99

This product was last offered at the strikethrough price on
06-14-2026

$ 120.59 USD

Add to Wish List

Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.

Enhanced Appearance: Mirror finish provides a polished, high-end look.
Durable Construction: Double-wall design for long-lasting performance.
Precision Fit: 3.0-inch inlet and 3.5-inch outer diameter for a perfect fit.
Stylish Design: Slash cut and stepped left design for a unique, aggressive appearance.
Easy Installation: Designed for straightforward installation on compatible vehicles.

Show More Show Less

Turner - 3.5" Black Chrome Swivel Exhaust Tips - Set of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:39802153

Part#: 049478LA03-02KT1

In Stock

Sale - Save 10% $ 279.99

This product was last offered at the strikethrough price on
06-14-2026

$ 251.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 279.99

This product was last offered at the strikethrough price on
06-14-2026

$ 251.96 USD

Add to Wish List

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 6 Series F12 (2012+)

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results