Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:
2014+ F22 BMW 228i 228iX 230i 230 iX M235i M235iX M240i M240iX
2014+ F23 BMW 228i 228iX 230i 230 iX M235i M235iX M240i M240iX
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe
2010+ F07 BMw 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Over time, road grime, salt, and moisture take a toll on the factory rear leveling rod. The original equipment often corrodes, seizes, and eventually snaps—or worse, binds up and breaks your expensive headlight leveling sensor. With this issue in mind, ECS has engineered a heavy-duty, bulletproof solution designed to outlast the car it’s installed on.

Instead of brittle OE plastic that degrades and snaps over time, this rod is constructed from high-strength, flexible polyurethane. Paired with corrosion-resistant stainless steel ball studs, it guarantees smooth articulation and prevents the binding that destroys expensive sensors. Precision-manufactured for a perfect, bolt-on fit, this upgrade requires zero modifications to replace your fragile OEM unit.

This is a direct-fit replacement for Genuine BMW part number 37146752797, restoring proper suspension-to-sensor geometry so your headlights adjust perfectly to changing loads and road conditions.

Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.

• High-quality silicone couplers and elbows for BMW projects
• Precision-engineered for reliability and performance
• Versatile solution for intercooler installations, custom intake systems, and more
• Ensures durability and longevity for your automotive projects

Black Chrome UNIVERSAL Swivel Exhaust Tip - 4.0" offers both style and adjustability with its innovative design. This exhaust tip features a unique swivel collar that allows for precise alignment and perfect fitment. The tip can be adjusted to any direction, and once set, it remains securely in place by tightening the hex bolt to 14 ft-lbs (19 Nm).

• Precision Laser Etched Logo: Each tip includes a laser-etched logo for a premium look.
• Durable Construction: Built with chrome-plated nuts, a 304SS cap screw, clamp, insert ring, and exhaust tip for longevity.
• Stylish Design: Features a slant cut, double-wall construction, and rolled edge for a striking appearance.
• Versatile Fitment: Available in a 4.0" outlet and finished in a sleek black chrome.
• Dimensions:
  • Inlet Size: 3.0"
  • Overall Length: 7.0" (6.0" Tip + 1.0" Clamping Surface)
  • Outlet Size: 4.0"
  • Outlet Style: Double Wall, Rolled Edge, Slant Cut

Modification may be required for proper fitment.

Meet modern emission regulations while preserving engine performance with the ECS Baffled Oil Catch Can. Designed for BMW and MINI vehicles, this system efficiently captures blow-by gases, preventing excessive oil vapor ingestion into the intake tract. The innovative 4-chamber baffle system maximizes oil/air separation, reducing carbon build-up and pollutants. Featuring a 1/4" drain fitting for easy maintenance, this catch can minimizes oil deposits, ensuring cleaner emissions and enhanced engine performance.

Key Benefits:

• Efficient 4-chamber baffle system for maximum oil/air separation
• Recirculated design reduces oil ingestion, promoting cleaner emissions
• Durable 6061-T6 billet machined body with anodized black finish for longevity
• Integrated dipstick and sealed reservoir for easy oil inspection and maintenance
• Serviceable design with removable baffle plates for cleaning
• Easy installation with customizable mounting options and leak-free fittings
• Engineered and manufactured in the USA for superior performance and durability

Note: Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

Enhance Your BMW's Aesthetic with ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Burnt Finish - Pair

• Elevates the look of your BMW's exhaust system
• Constructed from high-quality titanium for durability
• Features a stylish burnt finish for a unique appearance
• Easy to install and compatible with most exhaust systems

Upgrade the appearance of your BMW's exhaust system with the ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Burnt Finish - Pair. Crafted from high-quality titanium, these exhaust tips are not only durable but also add a touch of sophistication to your vehicle. The burnt finish enhances the overall aesthetics, giving your BMW a unique and eye-catching look. Installation is a breeze, and these tips are designed to be compatible with most exhaust systems, ensuring a seamless upgrade experience.

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (Turner spacers come in 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

Two ways to buy -

• Own. Just as it says, you buy this kit to own. Perfect for shops or race teams that change wheels or brake components often. For shops you can measure wheel clearance and order the correct spacers the first time around (no wasting inventory or paying return shipping). Note: Kits purchased to Own are not returnable for refunds.
• Rent. Pay the full price but get $110 as a store credit when you return the kit. We keep a modest $19.95 fee for the service. Perfect for DIY and enthusiasts who only need the Test Kit once. Use your store credit to purchase your spacers (or anything else from our catalog).

Wheel Spacer FAQ:
How to measure for wheel spacers
Wheel spacer encyclopedia

Elevate your BMW's performance and reduce rotational mass with ECS Titanium Wheel Bolts, ideal for weight-conscious enthusiasts or those seeking high-quality, rust-resistant wheel bolts.

Key Benefits:

• 50% lighter than steel bolts, reducing rotational mass for improved performance.
• CNC'd from annealed titanium alloy, ensuring high quality and durability.
• Tested to class 10.9 fastener proof load requirements without signs of fatigue.
• 14mm diameter, 1.25mm thread pitch, 27mm length, conical seat, and 17mm head.
• Thoroughly clean hub threads before installation to prevent fatigue or cracking.
• Note: Adjust bolt length when using wheel spacers for proper fitment.

Upgrade to ECS Titanium Wheel Bolts for your BMW, optimizing performance while maintaining high quality and durability.

BMW Rear Drilled & Slotted Brake Rotors V5 - Set (345x24) are precision manufactured to ensure consistent stopping power during high-performance driving. Designed by Turner Motorsport, these 5th generation rotors are crafted for BMW vehicles, featuring advanced technology for enhanced braking performance. With a sleek matte black zinc coating, they offer superior corrosion protection.

The V5 rotors incorporate a cross-drilled and slotted design, providing superior heat dissipation and improved wet-weather performance compared to traditional slotted rotors. This makes them ideal for high-performance driving enthusiasts. The black zinc coating not only adds a modern look but also delivers enhanced protection against corrosion.

• Enhanced Heat Dissipation: The cross-drilled and slotted design improves cooling and overall braking performance.
• Improved Wet-Weather Performance: Superior braking response in wet conditions ensures safety and control.
• Matte Black Zinc Coating: Offers a contemporary appearance and excellent corrosion resistance.
• High-Quality Materials: Constructed from premium materials to handle high-performance demands.
• Precision Machining: Ensures optimal rotor balance, reduces vibration, and provides a smooth braking experience.

For performance-driven enthusiasts seeking lightweight and high-quality wheel bolts, ECS Titanium Wheel Bolts are the ideal choice. These bolts are 50% lighter than steel equivalents, reducing rotational mass on the vehicle. Precision CNC'd from annealed titanium alloy, these bolts meet class 10.9 fastener proof load requirements without signs of fatigue or failure.

Benefits:

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for superior strength
• Full set of 20 for comprehensive wheel bolt replacement
• Diameter: 14mm, Thread Pitch: 1.25mm, Length: 27mm, Head: 17mm, Seat: Conical Seat
• Ensure thorough cleaning of hub threads before installation to prevent potential fatigue or cracking due to leftover zinc from previous bolts
• Note: When using wheel spacers, calculate the required bolt length by adding spacer size to OE bolt length for proper fitment (e.g., 26mm OE Wheel Bolt + 15mm Wheel Spacer = 41mm Length Bolt)

Enhance Your BMW's Performance with Titanium Conical Seat Wheel Bolt - 14x1.25x35mm - Set Of 20

• Lightweight titanium construction reduces unsprung weight
• Corrosion-resistant for long-lasting durability
• Conical seat design ensures optimal wheel fitment
• Set of 20 bolts for complete wheel installation

Elevate your BMW's performance with the Titanium Conical Seat Wheel Bolt - 14x1.25x35mm - Set Of 20. Crafted from lightweight titanium, these bolts reduce unsprung weight, enhancing agility and responsiveness. Their corrosion-resistant properties ensure long-lasting durability, even in harsh driving conditions. The conical seat design provides optimal wheel fitment, promoting safety and stability. With a set of 20 bolts included, this kit is perfect for complete wheel installation.

Upgrade your BMW with ECS Tuning's Stainless Steel Hose Clamps, designed for convenience and durability. With various band widths and German-style T-bolts, these clamps offer easy adjustment to your required diameter. Say goodbye to dealer pricing and enjoy the quality you love at ECS Tuning.

• Full stainless steel construction
• Various band widths available
• German-style T-bolts for easy adjustment
• Convenient solution for hose clamp replacement

ECS 1/2"/12mm Band Hose Clamp - 20-32mm

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

• Premium 304 stainless steel construction for durability
• German-style T-bolt design for easy size adjustment
• Versatile band widths cater to different hose sizes
• Eliminates the need for expensive dealership purchases
• Ensures secure and reliable hose connections

Upgrade your exhaust system with the Stainless Steel Oxygen Sensor (O2) Weld Bung (M18x1.5mm). This high-quality weld bung is made from stainless steel, ensuring durability and resistance to corrosion. It features M18x1.5mm threads, making it compatible with most oxygen sensors. Perfect for custom exhaust setups or replacing damaged bungs, this weld bung is a must-have for any automotive enthusiast.

• Made from high-quality stainless steel for durability and corrosion resistance
• M18x1.5mm threads ensure compatibility with most oxygen sensors
• Ideal for custom exhaust setups or replacing damaged bungs
• Essential for automotive enthusiasts looking to upgrade their exhaust system