BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Automatic Transmission Service Kit
For GA8HP70Z or GA8HP45Z automatic transmissions
Packaged by Turner - Corporate Logo
T#:5389733
Part#: 24118612901TMSKT
In Stock
Sale - Save 23% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 166.09 USD
Free Shipping
Sale - Save 23%
$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 166.09 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles
Show More Show Less
Packaged by Turner - Corporate Logo
T#:599759
Part#: 11377603979KT2
In Stock
Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Sale - Save 10%
$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD
Free Shipping
Includes actuator, actuator gasket and valve cover gaskets
Packaged by Turner - Corporate Logo
T#:639047
Part#: 33506862725KT2
In Stock
Sale - Save 3% $ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD
Free Shipping
Sale - Save 3%
$ 168.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.15 USD
Free Shipping
Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a OE Lemforder replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Genuine BMW Guide Support - This item fits the following BMW Chassis: F22,F30,F31,F32,F33,F36
Show More Show Less

Packaged by Turner - Corporate Logo
T#:554053
Part#: 11517604027KT1
In Stock
Sale - Save 25% $ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping
Sale - Save 25%
$ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping

The N20/n26 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to normally aspirated models. The cooling demands mean additional stress on the major cooling components, especially the water pump and thermostat. 
 

Kit includes:

  • Mahle-Behr thermostat
  • Pierburg water pump
  • Genuine BMW coolant
  • Mounting hardware required for both the thermostat and water pump

 

This item fits the following BMWs: 
2014+ F22 BMW 228i 228i xDrive 
2014+ F23 BMW 228i 228i xDrive 
2012+ F30 BMW 328i 328i xDrive - Sedan 
2013+ F31 BMW 328i xDrive - Wagon 
2013+ F32 BMW 428i 428i xDrive - Coupe 
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible 
2014+ F34 BMW 328i xDrive GT - Gran Tourismo 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 
2012+ F10 BMW 528i 528i xDrive 
2011+ F25 BMW X3 xDrive28i 
2015+ F26 BMW X4 xDrive28i 
2009+ E89 BMW Z4 sDrive28i

Show More Show Less

Packaged by Turner - Corporate Logo
T#:554075
Part#: 11537601158KT2
In Stock
Sale - Save 24% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.44 USD
Free Shipping
Sale - Save 24%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.44 USD
Free Shipping

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

  • Wahler Thermostat
  • 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

Show More Show Less
Packaged by Turner - Corporate Logo
T#:6181666
Part#: TWHF9905F13T
In Stock
Sale - Save 5% $ 151.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 144.57 USD
Free Shipping
Sale - Save 5%
$ 151.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 144.57 USD
Free Shipping
12.5MM (.49 inch) Big Pad Wheel Spacers for BMW E70 X5M, E71 X6/X6M, F02, F06, F07, F10, F12/F13, F22, F25, F3X, F8X M3/M4 These are our Big Pad wheel spacers designed for the latest generation of factory BMW wheels. The "wheel pad" is the back of the wheel that mounts to the hub on the car. Since the early 2000s the factory BMW wheel pad diameter has grown - 150mm, 152mm, 154mm, and now 156mm. Most of the wheel spacers on the market are 152mm. The difference from using the smaller spacer on a large pad will leave an unsightly step down between the back of the wheel and the brake rotor hat (see image). To fix this visual defect we use a larger diameter spacer - the Big Pad. This will have less of a step, or no step at all, when used with the larger pad size. Note that nearly all aftermarket wheel manufacturers use the smaller pad size (mainly to reduce unsprung weight). For more information on wheel pad sizes and their effects on fitment and strength, click to our spacers FAQ page. Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems. A spacer fits between the wheel and the hub assembly. The wheel will be pushed further outboard by the thickness of the spacer. Spacers allow you to correct wheel offset issues when the wheel is too 'tucked in' to the bodywork, clear the wheel from contact with the suspension or inner bodywork, clear larger brakes, improve handling and stability by increasing track width, or simply to get the right look and stance. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features hub-centric design with hub-centric lip precise tolerance fitment thanks to CAD process and CNC mill machine large pad surface area - 156mm vs standard 150mm aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Wheel Spacer Tech & FAQ Important Note: It is vital that you measure the depth of your hub lip. The depth of the lip must not exceed the thickness of the spacer. This is critical on newer chassis cars that have deeper hubs than older models. For examples and tips on measuring, check out our How To Measure for Spacers page. Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: large Extended Wheel Bolts Required for all BMW wheel spacers is a set of longer wheel bolts or wheel studs. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). A black zinc coating will maintain a factory BMW appearance and provide long-lasting corrosion protection. Zinc finishes are designed to withstand 700 hours of salt spray testing. This item fits the following BMWs: Front or Rear 2014+ F22 BMW 228i 228iX M235i M235iX 2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan 2012+ F31 BMW 328i 328iX - Wagon 2014+ F34 BMW 328i 328iX 335iX - Gran Turismo 2014+ F32 BMW 428i 428iX 435i 435iX - Coupe 2014+ F33 BMW 428i 428iX 435i 435iX - Convertible 2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe 2015+ F80 BMW M3 2015+ F82 BMW M4 2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT 2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5 2012+ F12 BMW 640i 640i xDrive 650i 650i xDrive M6 2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe M6 Gran Coupe 2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li 2011+ F25 BMW X3 xDrive28i X3 xDrive35i Rear Only 2007-2013 E70 BMW 2007-2014 E71 BMW
Show More Show Less

Packaged by Turner - Corporate Logo
T#:590423
Part#: TMSTIKN55KT
In Stock
Sale - Save 3% $ 248.08

This product was last offered at the strikethrough price on
06-15-2026

$ 240.64 USD
Free Shipping
Sale - Save 3%
$ 248.08

This product was last offered at the strikethrough price on
06-15-2026

$ 240.64 USD
Free Shipping
Reusing old hardware and gaskets can often lead to oil and exhaust leaks. To prevent this, we have assembled this kit which includes all of the basic components needed to install a turbo upgrade or a re-built turbo on your N55 3.0L.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:556723
Part#: N20TISKT
In Stock
Sale - Save 1% $ 215.99

This product was last offered at the strikethrough price on
03-25-2026

$ 213.63 USD
Free Shipping
Sale - Save 1%
$ 215.99

This product was last offered at the strikethrough price on
03-25-2026

$ 213.63 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5416783
Part#: 11657638783TMSKT
In Stock
Sale - Save 13% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD
Free Shipping
Sale - Save 13%
$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD
Free Shipping
Located on the exhaust manifold, includes new mounting hardware. The wastegate actuator releases excess boost pressure. A failed unit may result in a boost leak, reduced performance, and, ultimately, turbocharger failure. If your wastegate actuator has failed, replace it with this OEM part from Turner Motorsport to restore performance and prolong engine life.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:5498500
Part#: 12137594937IGKT
In Stock at Vendor
Sale - Save 24% $ 336.99

This product was last offered at the strikethrough price on
07-21-2026

$ 257.67 USD
Free Shipping
Sale - Save 24%
$ 336.99

This product was last offered at the strikethrough price on
07-21-2026

$ 257.67 USD
Free Shipping
If your BMW's mileage is getting up there, be sure to keep your ignition system in check. Whether you currently have a misfire or you're just doing preventative maintenance, this kit is perfect. The kit includes: 6 Delphi Coils with locks 6 Bosch spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease The kit includes: 6 Bremi Coils with locks 6 Bosch spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease
Show More Show Less
Packaged by Turner - Corporate Logo
T#:598822
Part#: 11657625293KT3
In Stock at Vendor
Sale - Save 9% $ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 186.46 USD
Free Shipping
Sale - Save 9%
$ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 186.46 USD
Free Shipping
Reusing old hardware and gaskets can often lead to oil and exhaust leaks. To prevent this, we have assembled this kit which includes all of the basic components needed to install a turbo upgrade or a re-built turbo on your N20.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555765
Part#: PBTSRKT54
In Stock
Sale - Save 23% $ 418.20

This product was last offered at the strikethrough price on
05-03-2026

$ 322.00 USD
Free Shipping
Sale - Save 23%
$ 418.20

This product was last offered at the strikethrough price on
05-03-2026

$ 322.00 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less


Strut Mount & Bearing Replacement Kit - F3X
For vehicles without EDC, with production date up to 11/2014, and 3-bolt shock mounts
Packaged by Turner - Corporate Logo
T#:855008
Part#: 31306855817KT2
In Stock
Sale - Save 8% $ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 227.83 USD
Free Shipping
Sale - Save 8%
$ 247.99

This product was last offered at the strikethrough price on
05-03-2026

$ 227.83 USD
Free Shipping
Replace your worn or clunking strut mounts with this kit that has all the necessities to get the job done. Kit includes strut mounts and hardware.
Rotor And Pad Replacement Package - Front And Rear - F22 228 230, F30...
For vehicles with standard brakes (Without M-sport or M-Performance) with a production ...
Packaged by Turner - Corporate Logo
T#:558211
Part#: F3XRPRPKT
Ships Today
Sale - Save 28% $ 624.58

This product was last offered at the strikethrough price on
04-08-2026

$ 452.76 USD
Free Shipping
Sale - Save 28%
$ 624.58

This product was last offered at the strikethrough price on
04-08-2026

$ 452.76 USD
Free Shipping

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this F3X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

  • Textar Front & Rear Brake Pads
  • Zimmerman Front & Rear Rotors
  • New Front & Rear Wear Sensors
  • Brand New Stainless Steel Set Screws
  • Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
F22 BMW 228i/ix 230i/ix (w/ Standard Brakes)
F3X BMW 320i/ix 328d/i/ix 330i/ix 428i/ix 430i/ix (w/ Standard Brakes)

Show More Show Less
Packaged by Turner - Corporate Logo
T#:587399
Part#: 112886137071ABKT
Back Ordered
Sale - Save 18% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.57 USD
Free Shipping
Sale - Save 18%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.57 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:554535
Part#: 8HPATSKT
In Stock
$ 384.54 USD
Free Shipping
$ 384.54 USD
Free Shipping

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

  • Automatic transmission filter with associated hardware
  • Oil pan gasket
  • Drain plug with sealing washer
  • Fill plug with sealing washer
  • 7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555744
Part#: PBTSRKT34
In Stock
Sale - Save 18% $ 326.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.20 USD
Free Shipping
Sale - Save 18%
$ 326.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.20 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241398
Part#: TMSF30N55BPKT
In Stock
Sale - Save 6% $ 520.99

This product was last offered at the strikethrough price on
05-03-2026

$ 491.62 USD
Free Shipping
Sale - Save 6%
$ 520.99

This product was last offered at the strikethrough price on
05-03-2026

$ 491.62 USD
Free Shipping
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate ECS Kevlar reinforced accessory belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter
Show More Show Less

Packaged by Turner - Corporate Logo
T#:2810083
Part#: 3671725KT
Ships in 3 Business Days
Sale - Save 1% $ 1,308.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,300.85 USD
Free Shipping
Sale - Save 1%
$ 1,308.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,300.85 USD
Free Shipping
Includes Required Retrofit Harness - This is a retrofit kit that allows you to run the stock fuel pump found on the B58TU Supra engine on your F chassis B58 car. It has increased flow that will support higher horsepower levels without the need for complex fuel system upgrades. Has been tested to support 600+WHP.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:557276
Part#: N55WTKT2
Ships on Nov 30, 2026
Sale - Save 4% $ 865.99

This product was last offered at the strikethrough price on
05-03-2026

$ 829.18 USD
Free Shipping
Sale - Save 4%
$ 865.99

This product was last offered at the strikethrough price on
05-03-2026

$ 829.18 USD
Free Shipping

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

  • Genuine BMW Thermostat
  • OEM VDO Electric Water Pump
  • Genuine BMW Auxiliary Water Pump
  • Genuine BMW Antifreeze/Coolant
  • OEM Mounting hardware required for both the thermostat and water pump
Show More Show Less

Packaged by Turner - Corporate Logo
T#:557261
Part#: N55WTKT
Ships on Nov 30, 2026
Sale - Save 10% $ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 476.66 USD
Free Shipping
Sale - Save 10%
$ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 476.66 USD
Free Shipping

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

  • Genuine BMW Thermostat
  • OEM Pierburg Electric Water Pump
  • Genuine BMW Antifreeze/Coolant
  • OEM Mounting hardware required for both the thermostat and water pump
Show More Show Less

Packaged by Turner - Corporate Logo
T#:1241337
Part#: 24118612901T1KT
Back Ordered
Sale - Save 1% $ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 448.14 USD
Free Shipping
Sale - Save 1%
$ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 448.14 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:590685
Part#: PBTSRKT54-1KT
In Stock
Sale - Save 18% $ 264.01

This product was last offered at the strikethrough price on
05-03-2026

$ 216.91 USD
Free Shipping
Sale - Save 18%
$ 264.01

This product was last offered at the strikethrough price on
05-03-2026

$ 216.91 USD
Free Shipping