Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
10mm = .39"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on
H&R's 10mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.
This spacer slips on the existing hub lip and includes a new lip for the wheel to rest on. 10mm spacers are considered a custom fitment and special consideration must be given to ensure the spacer is fully seated on the lip (and not bottoming out on the stock hub lip). Modification of the stock hub lip may be required.
Longer wheel bolts are required. Choose from black or silver bolts from the options below.
Wheel Spacer FAQ
Wheel Spacer Encyclopedia - everything you wanted to know
This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)
2014+ F80 M3 - Front Only
2014+F82/3 M4 - Front Only
H&R Rear sway bar / swaybar for F30 F32 and F22 - 20mm, fixed (non-adjustable.)
28mm 2 way adjustable bar; bushings included.
10mm = .39"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on
H&R's 10mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.
This spacer slips on the existing hub lip and includes a new lip for the wheel to rest on. 10mm spacers are considered a custom fitment and special consideration must be given to ensure the spacer is fully seated on the lip (and not bottoming out on the stock hub lip). Modification of the stock hub lip may be required.
Longer wheel bolts are required. Choose from black or silver bolts from the options below.
Wheel Spacer FAQ
Wheel Spacer Encyclopedia - everything you wanted to know
This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)
2014+ F80 M3 - Front Only
2014+F82/3 M4 - Front Only
| Wheel Spacer FAQ |
| How To Measure for Spacers |
| Wheel Spacer Encyclopedia - everything you wanted to know |
| Wheel Spacer FAQ |
| How To Measure for Spacers |
| Wheel Spacer Encyclopedia - everything you wanted to know |
28mm 2 way adjustable bar; bushings included.
12mm = .47"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on
H&R's 12mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of the latest BMW wheels.
Longer wheel bolts are required.
Wheel Spacer FAQ
Wheel Spacer Encyclopedia - everything you wanted to know
This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)
2015+ F80 BMW M3 Sedan - Front Only
2015+ F82 BMW M4 Coupe - Front Only
2015+ F83 BMW M4 Convertible - Front Only
The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.
H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.
For vehicles without DDC (Dynamic Dampening Control).
This coilover kit fits the following BMWs:
F22 M235i M240i without DDC
| Wheel Spacer FAQ |
| How To Measure for Spacers |
| Wheel Spacer Encyclopedia - everything you wanted to know |
| Wheel Spacer FAQ |
| How To Measure for Spacers |
| Wheel Spacer Encyclopedia - everything you wanted to know |
| Wheel Spacer FAQ |
| How To Measure for Spacers |
| Wheel Spacer Encyclopedia - everything you wanted to know |
The H&R Street Performance Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.
H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.
SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING
Height adjustment range:
F: -0.6-1.6"
R: -1.0-2.1"
This coilover kit fits the following BMWs:
2013+ F32 BMW 428i xDrive 435i xDrive - Coupe
Not for cars with EDC - Electronic Damping Control
13mm = .51"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on
H&R's 13mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.
Longer wheel bolts are required.
Wheel Spacer FAQ
Wheel Spacer Encyclopedia - everything you wanted to know
This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2011+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe
12mm = .47"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on
H&R's 12mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of the latest BMW wheels.
Longer wheel bolts are required.
Wheel Spacer FAQ
Wheel Spacer Encyclopedia - everything you wanted to know
This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan - Front Only
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon - Front Only
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe - Front Only
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible - Front Only
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe - Front Only
2012+ F10 BMW M5 (front and rear)
2012+ F12 BMW M6 (front and rear)
2013+ F06 BMW M6 Gran Coupe (front and rear)
2015+ F80 BMW M3 Sedan - Front Only
2015+ F82 BMW M4 Coupe - Front Only
2015+ F83 BMW M4 Convertible - Front Only
| Wheel Spacer FAQ |
| How To Measure for Spacers |
| Wheel Spacer Encyclopedia - everything you wanted to know |
| Wheel Spacer FAQ |
| How To Measure for Spacers |
| Wheel Spacer Encyclopedia - everything you wanted to know |