Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!
-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look
Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard coating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!
-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look
For Vehicles without M-Sport Brakes sporting 312x24mm front rotors and 300x20 rear rotors (P337A=No, S2NHA=No)
Everything you need to service your front and rear brakes in an afternoon in one simple kit from Turner Motorsport!
Turner Motorsport has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our brake service kit includes rotors, pads, sensors, assembly grease, and even a full compliment of set screws to make your brake replacement easy. A complete matched kit assembled by our team of experts, will keep all of your brake components working in perfect harmony.
Includes the following parts:
Front & Rear ECS V5 GEOMET-Coated Brake Rotors Front & Rear ECS DD23 "Daily Driver" Ceramic Brake Pads OE pad wear sensors Rotor set screws 2 AGS Syl-Glide Silicone Brake Lubricant packets
When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance.
Included in this F3X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.
Brake components in this kit:
Fits the following BMWs:
F22 BMW 228i/ix 230i/ix (w/ Standard Brakes)
F3X BMW 320i/ix 328d/i/ix 330i/ix 428i/ix 430i/ix (w/ Standard Brakes)
| F30 Brake FAQ Articles |
| F30 328i Brake Package Differences |
| Brake Rotor Buying Guide |
When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance.
Included in this F3X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.
Brake components in this kit:
Fits the following BMWs:
F3X BMW 328 330 428 430 (w/ M Sport Brakes)
F3X BMW 335 340 435 440 (w/ Standard Brakes)
F22/23 BMW 228 230 (w/ M Sport Brakes)
F22/23 BMW M230 M240 (w/ Standard Brakes)
Ensure a seamless front and rear brake service with Turner Motorsport's all-in-one kit. This comprehensive brake service package simplifies the process by offering rotors, pads, sensors, assembly grease, and a complete set of set screws for easy brake replacement. Crafted by experts, this matched kit ensures optimal performance and harmony among all brake components.
Included components:
Turner Motorsport houses an extensive collection of premium brake components, encompassing hoses, hard lines, fluids, hardware, and high-temperature lubricants. Find everything essential for a professional-grade brake service at Turner Motorsport.
| Brake Package FAQ |
| Brake Pad Buying Guide |
| Brake Rotor Buying Guide |
| F30 328i Brake Package Differences |
| Brake Package FAQ |
| Brake Pad Buying Guide |
| Brake Rotor Buying Guide |
| F30 328i Brake Package Differences |
Reduce weight. Reduce heat. Reduce warping.
ECS Tuning engineered 2-Piece semi-floating rotors offer real-world benefits that can be felt on both the street and track! 2-Piece rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. The reduction of unsprung weight improves handling characteristics under all situations. This reduction in rotational inertia allows for quicker acceleration, decreased braking distances, and more responsive handling.
Features include:
Aluminum hats: To save weight, each rotor ring is bolted to a lightweight aluminum hat made from high-quality 6061 aluminum, and hard anodized with an attractive matte black finish that is both durable and corrosion-resistant. Gray cast iron rings: Long known for its wear resistance and stable friction characteristics, cast iron is favored for brake rotors due to its ability to absorb and dissipate large amounts of heat. 2-Piece construction: Conventional rotors are unable to cope with the stress of drastic heat fluctuations and are prone to warping. ECS 2-Piece semi-floating rotors allow the radial expansion of the rotor ring - preventing warping. Heat treated: Heat treating of ECS 2-Piece rotors makes them stiffer and stronger - for improved performance and further prevention of warping. Drilled and slotted: 2-Piece rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Overall weight savings: This particular ECS 2-Piece rotor weighs only 20.95lbs compared to a stock rotor (24.45lbs). Lighter rotors reduce unsprung weight and rotational mass to improve both braking and suspension performance. Manufacturing quality: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Ground braking surfaces ensure rings run parallel, and pads bed easily. Kit includes the following parts:
Front ECS 2-piece semi-floating cross-drilled and slotted Front ECS EP24 "Enthusiast Performance" Brake Pads Pad wear sensor ECS stainless steel rotor set screws These rotors are compatible with vehicles using the M sport brake system which is also found standard for certain applications.
| Brake Package FAQ |
| Brake Pad Buying Guide |
| Brake Rotor Buying Guide |
| F30 328i Brake Package Differences |
PRESSURE BRAKE BLEEDER:
We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.
Features:
FLUID CATCH BOTTLE:
keep your fluid's off the floor and into our catch bottle. The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system. Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.
Note:
WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
The Schwaben Metric Bubble Flaring Tool Set stands as the ultimate solution for achieving precise brake line connections and flawless tubing applications. This tool set unlocks the ability to craft immaculate ISO bubble flares on brake lines and tubing systems commonly found in European, Japanese, and select domestic model brake lines. The outcome? Connections that are not only secure but also capable of thriving under your vehicle's demanding conditions.
At its core, this set features a robust and enduring hardened steel bar, embodying the essence of durability. Complementing this bar is an extensive array of adapters tailored for 4.75mm, 6mm, 8mm, and 10mm tubing, showcasing the set's versatility across various applications.
Discover unparalleled precision as you secure your brake lines and tubing with the utmost accuracy. This tool set empowers you to effortlessly shape bubble flares, guaranteeing connections that are both leak-proof and resilient. Whether you're a devoted automotive technician or a passionate enthusiast, the Schwaben Metric Bubble Flaring Tool Set is right for you!
Includes:
Replacement front brake rotors (340x30) for the 2012+ F30 335i/335xi and F32 435i/435xi. These rotors fit the standard 335/435 brake package or a 2012-2013 US-market 335i M Sport.
Zimmerman rotors are finished with an anti-corrosion zinc dichromate coating over the entire rotor. This coating is applied over the rotor hat, face, and through the vanes for total corrosion protection. Even after a year of use the Zimmerman coating doesn't change color or effectiveness. The rotors are ready to use after correct bed-in procedures have been done. In addition, Zimmerman uses a high carbon content in their discs for improved thermal performance.
F30 Brake FAQ Articles
F30 328i Brake Package Differences
F30 335i Brake Package Differences
Price is for a pair of rotors.
This item fits the following BMWs with their stock braking systems:
2014+ F22 BMW M235i M235iX
2012+ F30 BMW 335i 335xi - Sedan
2014+ F32 BMW 435i 435iX - Coupe
2014+ F33 BMW 435i 435iX - Convertible
2014+ F34 BMW 335iX - Gran Turismo
2014+ F36 BMW 435i 435iX - Gran Coupe
This item fits the following BMWs with the S2NHA M Sport brake option:
2014+ F22 BMW 228i 228iX
2012+ F30 BMW 328i 328xi - Sedan
2012+ F31 BMW 328i 328iX - Wagon
2014+ F32 BMW 428i 428iX - Coupe
2014+ F33 BMW 428i 428iX - Convertible
2014+ F34 BMW 328i 328iX - Gran Turismo
2014+ F36 BMW 428i 428iX - Gran Coupe
