BMW Internal Engine Parts for BMW 2 Series F22 (2014+)

Unlike traditional BMW engines, modern engines, like the B48 and B58, use a volume-flow-regulated oil pump. Instead of providing a consistent volume of oil, these new systems control oil supply at each individual operating range.

This Control Valve Solenoid is a critical component in the volume-flow-regulated oiling system. This piece seamlessly adjusts the oil pressure based on inputs from the DME. In the event of failure, this means the engine oil supply system may become restricted.

Thankfully, Bremmen Parts offers this high-quality, OE replacement Control Valve Solenoid at a fraction of Genuine price. Built with durability and fitment in mind, this component is an exact fit for your BMW.

This eccentric shaft is a vital component of your BMW's N55 Valvetronic system, responsible for precise control of valve lift. In the N55 engine, the Valvetronic system uses intermediate levers between the camshaft and lifters to adjust valve lift dynamically. These levers are actuated by this eccentric shaft, which is rotated by an electronically controlled motor under the direction of the engine computer.

Eccentric shaft failure is a common issue in N55 engines, often caused by inadequate lubrication due to extended oil change intervals. The most frequent failure occurs when the eccentric shaft gear wears down, leading to disengagement from the motor's worm drive. Symptoms include multiple fault codes, such as P1014 (Shaft Parity Error), P1017 (Shaft Sensor Plausibility), P1023 (Valvetronic Adjustment Range), and P10E1 (Valvetronic System No Travel Detected).

If your BMW is experiencing Valvetronic-related fault codes, a failing eccentric shaft could be the source of the problem. Opt for this premium direct replacement from Bremmen Parts to restore your Valvetronic system's functionality and ensure a durable, high-quality repair.

This Solenoid Actuator is responsible for adjusting camshaft timing through precise phasing, ensuring optimal engine performance.

As a common culprit behind VANOS-related trouble codes, replacing this component can be expensive. Opt for a durable and cost-effective solution with a high-quality replacement from Bremmen Parts, designed to deliver reliable performance without breaking the bank.

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (8) Hardware for Oil Pan & Oil Sump Oil filter Liqui-Moly Molygen 5W-40 (6L) Drain Plug Turner Motorsport Oil Reminder Sticker Oil pan gasket RedLine assembly lube (4 oz.)

JE Pistons for BMW/TOYOTA B58B30 - 3.228" Bore, .866" Pin, -11.1CC Dish Volume

Boost Your Engine’s Performance with JE Forged Pistons

These JE Pistons are built for the modern high-performance BMW B58B30 and Toyota B58 engines, providing the perfect balance of strength, precision, and durability.

• Engine Compatibility: Designed for BMW B58 and Toyota B58 engines, such as those found in the Toyota Supra and BMW G20 models.
• Bore Size: 3.228" (82mm) ensures proper cylinder fitment for high-performance builds.
• Pin Size: 0.866" (22mm) wrist pin diameter for secure, reliable piston-rod connections.
• Dish Volume: -11.1cc, designed for turbocharged applications to reduce compression and prevent detonation under high boost.
• Forged 2618 Aluminum: Provides excellent strength and durability, allowing the pistons to withstand extreme conditions in both street and track environments.
• Lower Compression Ratio: Specifically engineered for boosted setups, ensuring optimal performance with turbo or superchargers.
• High-Temperature Coatings: Thermal coatings on the piston crowns reduce heat absorption, improving durability under high-stress conditions.
• Lightweight Design: Improves throttle response and engine rev speed by reducing the overall weight of the rotating assembly.

Ready for Extreme Boost Applications

Perfect for turbocharged and high-horsepower setups, these JE pistons are built to withstand extreme boost pressures, delivering reliable performance and power gains. Whether on the track or the street, these pistons will help extract maximum potential from your BMW or Toyota B58 engine.

BMW B58 3.0L VAC Performance Coated Rod Bearing Kit

The BMW B58 3.0L VAC Performance Coated Rod Bearing Kit offers an exceptional upgrade for performance enthusiasts seeking superior reliability and durability. These bearings are crafted with precision and feature a high-quality coating that enhances their performance. Unlike conventional treated bearings, this kit includes a physical coating layer that combines excellent embeddability with dry-lubricant properties, making it ideal for BMW engines.

• Precision Engineering: Manufactured with high precision and repeatability for optimal performance.
• Advanced Coating: Features a physical coating layer for superior embeddability and dry-lubricant properties.
• Enhanced Tolerance: Designed to run well across engine tolerances, reducing typical failures associated with OEM bearings.
• Improved Cold Starts: Ideal for both street and race engines, providing reliable performance during cold starts.
• Performance Upgrade: Offers a significant upgrade over OEM bearings, enhancing engine reliability and longevity.

B

JE Pistons BMW N55B30 Piston - 3.307 in Bore

Transform your BMW N55B30 engine with the high-performance JE Pistons Piston, engineered for those who demand power, efficiency, and reliability. With a precise 3.307-inch bore size, this piston is designed to enhance combustion dynamics, resulting in improved horsepower and torque. Crafted from premium forged aluminum, the JE piston is built to endure the rigors of high-performance driving, making it an ideal choice for both track enthusiasts and everyday drivers.

Key Features:

• Optimized Design: Each piston is meticulously crafted to ensure a perfect fit for the N55B30 engine, maximizing combustion efficiency and overall engine performance.
• 3.307-Inch Bore: This specific bore size enhances airflow and combustion efficiency, enabling your engine to unleash its full power potential while maintaining reliability.
• Durable Forged Construction: Made from high-quality forged aluminum, this piston offers exceptional strength and lightweight properties, making it capable of withstanding extreme conditions found in performance applications.
• Enhanced Combustion Characteristics: The uniquely designed piston crown promotes efficient fuel burn, reducing the chances of detonation and improving power delivery across the RPM range.
• Trusted Performance: JE Pistons are renowned in the automotive community for their durability and reliability, making them a preferred choice for high-performance builds.

Applications:

• Fits BMW N55B30 Engines – Perfect for high-performance applications, whether on the track or on the street.
• Ideal for builders looking to enhance their engine’s capabilities, ensuring maximum power and efficiency.

Technical Specifications:

• Bore Size: 3.307 inches, specifically designed for optimal performance in the N55B30 engine.
• Material: Premium forged aluminum for lightweight and strength.