click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Stainless Steel Brake Lines
  7. Brake Fluid
  8. Brake Calipers
  9. Caliper Rebuild Kits
  10. Parking Brake Parts
  11. Brake Cooling Ducts & Backing Plates
  12. Brake Pads - Brembo GT BBK Calipers
  13. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Clutch Parts
  6. UUC Short Shift Kits
  7. Axle Shafts
  8. Performance Short Shift Kits
  9. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. External Engine Parts
  7. Drive Belts & V-Belts
  8. Gaskets, Gasket Sets, Seals, & O-Rings
  9. Factory-Spec Replacement Turbos and Kits
  10. Crankcase Vent, PCV, and Oil Separator Systems
  11. Turbo Upgrades and Kits
  12. Electrical Sensors, Switches, & Relays
  13. Ignition Parts
  14. Alternator & Alternator Parts
  15. Fuel System Parts
  16. Internal Engine Parts
  17. Cylinder Head Parts & Head Bolts
  18. VANOS Units & Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Dinan Free Flow Exhaust Systems
  4. Performance Exhaust Systems
  5. Exhaust System Upgrades
  6. Exhaust Muffler Tips
  7. Oxygen Sensor - O2 Sensors
  8. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Emblems & Decals for Hood, Trunk, and Wheels
  3. Front Spoilers, Bumper Covers, & Air Dams
  4. Rear Spoilers, Rear Wings, & Aprons
  5. Body Trim Parts & Accessories
  6. License Plate Brackets & License Plate Frames
  7. Mirror Kits & Mirror Parts
  8. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  9. Hood Pins and AeroCatch Latches
  10. Racing Tow Hooks and Tow Straps
  11. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Dinan Cold Air Intake Kits
  3. Gruppe M Cold-Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. BOV, Chargepipe, and Intercooler Upgrade Kits
  10. Mass Air Sensor & Air Flow Meters
  11. Intake Boots & Hoses
  12. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Interior Switches and Switchgear
  14. Interior Trim & Accessories
Lighting
  1. Bulbs for Headlights, Turn Signals and Tail Lights
  2. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Cabin Air Filters, Heppa Filters, & Microfilters
  5. Transmission Filter Kits & Transmission Service Parts
  6. Ignition Coils
  7. Spark Plugs
  8. Service Reset Tools & Fault Code Readers
  9. Anti-Freeze and Coolant
  10. Engine Oils - Genuine BMW and OEM
  11. Power Steering and Hydraulic Fluids
  12. Transmission and Gear Oil - Genuine BMW and OEM
  13. MOTUL Engine Oil and Gear Lubricants
  14. Red Line Oil & Fluids
  15. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  6. H&R Coil Over Suspensions
  7. KW Coil Over Suspensions
  8. Sway Bar Kits
  9. Sway Bar Links & Sway Bar Parts
  10. Camber / Caster Kits
  11. Strut Braces & Stress Bars
  12. Control Arm Replacements & Upgrades
  13. Suspension Bushings & Mounts
  14. Tie Rods & Steering Parts
  15. Coil Over Spring Hardware
  16. Sachs Performance Coil Over Suspension
  17. AC Schnitzer Suspension Kits
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. D Force Flow Formed Alloy Wheels
  5. Original BMW Wheels and Wheel Upgrades
  6. Turner Motorsport Wheel Spacers
  7. ECS Tuning Wheel Spacers
  8. H&R Wheel Spacers
  9. Wheel Bolts, Wheel Studs and Nuts
  10. Wheel Emblems, Caps, and Accessories
  11. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fault Code Readers and OBD Scan Tools
  10. Fuel System Tools
  11. Genuine BMW Tool Kits
  12. Oil Service Tools
  13. Sockets
  14. Spark Plug Sockets
  15. Transmission and Differential Tools
  16. Wheel Pin Tools
  17. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW F22 Bilstein PSS PSS9 PSS10 Coil Over Suspensions

BMW F22 Bilstein PSS PSS9 PSS10 Coil Over Suspensions The Bilstein PSS family of coil overs feature German-engineered suspension designs for the aggressive and enthusiastic BMW driver. Bilstein PSS, PSS9, and PSS10 coilovers combine their patented and celebrated monotube shock technology with individual height adjustments to create a user-customizable ride and handling package. Bilstein Clubsport suspensions are for the committed track enthusiast who wants a cutting-edge, proven suspension for racing and open track events.

Bilstein Coil-Overs provide you with an exceptional blend of ride and handling with the added feature of height and dampening adjustability. With coilovers from Bilstein you get shocks and springs that are engineered together. The result is incredible handling with ride that is tuned for the street. Forget the notion that coil overs are only to be used in racing - they are now the perfect package for your streetcar.

Bilstein PSS: height adjustable, street use
Bilstein PSS9: 9-position dampers, height adjustable, street/track use
Bilstein PSS10: 10-position dampers, height adjustable, street/track use
Bilstein B16 RideControl: EDC 2-position dampers, height adjustable, street/track use
Bilstein Clubsport: 10x10-position motorsport dampers, height adjustable, track use
You're currently viewing parts for your (F22) 2-Series Coupe 2014+. Reset your chassis
For accurate results, specify your model below.
F22 F30/34 F32/36 xDrive Bilstein B16 Ridecontrol Coil Over Suspension Bilstein puts shock damper control at your fingertip with their B16 Ride Control coil over system. The Ridecontrol is a performance coil over system combined with EDC technology for cars that were not available with EDC from the factory. Now you can choose your suspension stiffness on the fly along with the benefits of a Bilstein PSS coil over!

An EDC (Electronic Damping Control) system uses an electronic control module wired to each shock absorber to vary the stiffness of the shock. With the Bilstein B16 kit you can choose between a primary Comfort setting or a stiffer Sport setting via a dash mounted button. You can leave it in Comfort for around-town running and instantly get a tighter and more responsive suspension for twisty country roads. The Comfort setting is also dynamic - sensing road characteristics and g-forces to instantaneously firm the suspension when you're pushing the car, just like a factory installed EDC system.

The basic kit is a Bilstein PSS system with true coil over front struts, rear shocks, four springs, height adjusters, and the EDC module, wiring, and button. The front struts are zinc coated for superior corrosion resistance. The system installs just like a normal suspension and uses the factory original front upper strut mounts. The rear requires the purchase of new shock mounts because of the larger shock shaft. You can choose to mount the EDC control module anywhere in the car (we chose the trunk floor) and then plug the harness into each shock and mount your button in the dash. Ride height can be set from 1.0"-1.75" lower than stock. Installation instructions included but professional installation is strongly recommended. This kit is TUV certified and a limited lifetime warranty from Bilstein covers the entire kit.

This coilover kit fits the following BMWs:
2013+ F30/34 BMW 320/328/335/340i xDrive
2014+ F32/36 BMW  428/435/440i xDrive
2015+ F22 BMW 228/230i xDrive
Part #: 49-207323
Price: $3528.95 (USD) 
Free Shipping Free Shipping
Quantity:   
Bilstein B12 Pro-Kit Suspension System - F22 228i 230i

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs: 
2014+ F22 BMW 228i 230i - Coupe

Part #: 46-223609
Price: $999.95 (USD) 
Quantity:   
F30 F32 F22 Bilstein Clubsport Coil Over Suspension

The Bilstein Clubsport Coilover Suspension for F30 3 series F32 4 series and F22 2 series provides maximum performance and adjustability for drivers who run their cars on the track to the limit yet also want a "streetable" suspension. The Clubsport shocks feature independent adjustment of both rebound and compression forces via the two aluminium adjustment knobs. The front adjustments are made from under the front strut; the rear adjustments are made from the top of the shock. With 10 settings for both compression and rebound there are up to 100 unique suspension settings to fine tune your car for a bumpy track, a billiard smooth track or the drive home.

The Bilstein Clubsport suspension is a TUV-certified, street-legal, high-end coilover package that is also designed for uncompromising use in racing, track days, and club racing. This is the same Bilstein Clubsport suspension used in racing series throughout Europe. The suspension combines the tried-and-tested BILSTEIN mono-tube shocks with the highest levels of engineering from the field of motor sport. The 2-way adjustment system, with integrated reservoir, offers a weight advantage for racing use compared to systems with external reservoirs.

With 10 x 10 clicks, a wide range of handling characteristics can be created in just seconds, allowing for instant back-to-back set-up and testing. In combination with the adjustable motorsport uniball camber plates, it is possible to select the suitable setup for the respective track, weather conditions, vehicle weight, driver preferance, and tire characteristics. Rear monoball upper shock mounts are also included for a complete, bolt-in package.

This package is supplied with a base set of springs - 100Nm (571lb) front and 140Nm (800lb, progressive) rear. These are 60mm ID springs so changing spring rates or lengths to suit your setup goals is very easy! Turner Motorsport stocks many springs to fine tuning your suspension package.

Click here for install and use guide, including TUV certification.

The product advantages at a glance:

 

  • 100 setting variations can be manually selected with noticeable differences
  • Adjustment knobs for independent 2 way adjustment of both rebound and compression with clear indicators from 1 (soft) to 10 (hard)
  • Positive click resolution and color-coding: red for rebound force, blue for bump force
  • Simple setup changes in while installed without additional tools
  • Camber adjustment with uniball support bearing
  • Weight and installation advantages thanks to integrated reservoir
  • Quality racing springs made from highly durable material
  • Spring plates and lock nuts made from special aluminium alloy
  • Street-legal: German TUV certificate
  • Fine-tuned by BILSTEIN under real motorsport conditions
  • BILSTEIN mono-tube gas pressure technology from the field of motorsport.
  • Surface coating using Triple-C-Technology for long-lasting corrosion resistance

Fitment note: wheel spacers may be required depending on wheel sizing and offset.

This coilover kit fits the following BMWs:
2014+ F22 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2013+ F32 BMW 428i 435i - Coupe
Will not work with factory EDC system
Photo is of similar kit. Actual photos coming soon.

 

Part #: 48-230834
Price: $4549.95 (USD) 
Free Shipping Free Shipping
Quantity:   
Bilstein B16 PSS10 Coil Over Suspension - F30 320i 328i 335i - F32 428i 435i - F22 228i, M235i

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

  • Largest available piston diameter for greater sensitivity and precise control.
  • Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
  • 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
  • Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
  • Weather resistant coating to resist oxidization, and ensure long life.
  • Lighter weight reduces wear and tear on suspension components.
  • Wrenches to adjust front and rear ride height included!


This coilover kit fits the following BMWs:
2014+ F22 BMW 228i M235i - Not for cars with EDC
2012+ F30 BMW 320i 328i 335i - Sedan - Not for cars with EDC
2013+ F32 BMW 428i 435i - Coupe - Not for cars with EDC

Part #: 48-217170
Price: $1790.95 (USD) 
Free Shipping Free Shipping
Quantity:   
Bilstein Coil Over Wrench - Pin Style - Small Bilstein Coil Over wrench for some PSS, PSS9 and PSS10 kits. Small wrench for adjusting the spring perch and lock ring on coil overs that require the M-F round pin style of adjuster (not rectangular inter-locking adjuster). May also be used with other coil over kits (H&R, Moton, JRZ, etc) that use a similar adjuster.
Part #: E4-XS1-Z001A00
Price: $16.95 (USD) 
Quantity:   
Bilstein B14 PSS Coil-Over Suspension - F30 320i 328i 335i - F32 428i, 435i

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

  • Threaded body adjustable range of 20 mm
  • Lowering of approx. 30-50 mm at front and rear
  • Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
  • Aluminum Spring plates and lock nuts
  • Surface coating using Triple-C-Technology for long-lasting corrosion resistance
  • Round threads for easy adjustment
  • Quality sport springs made from highly durable material
  • Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC

This coilover kit fits the following BMWs:
2014+ F22 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2013+ F32 BMW 428i 435i - Coupe

Part #: 47-264632
Price: $999.95 (USD) 
Free Shipping Free Shipping
Quantity:   
Bilstein B14 PSS Coil-Over Suspension - F30 320xi 328xi 335xi - F32 428xi, 435xi

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

  • Threaded body adjustable range of 20 mm
  • Lowering of approx. 30-50 mm at front and rear
  • Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
  • Aluminum Spring plates and lock nuts
  • Surface coating using Triple-C-Technology for long-lasting corrosion resistance
  • Round threads for easy adjustment
  • Quality sport springs made from highly durable material
  • Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC


This coilover kit fits the following BMWs:
2014+ F22 BMW 228i xDrive M235i xDrive
2012+ F30 BMW 320i xDrive 328d xDrive 328i xDrive 335i xDrive - Sedan
2013+ F32 BMW 428i xDrive 435i xDrive - Coupe
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 428i xDrive Gran Coupe 435i xDrive Gran Coupe

Part #: 47-207233
Price: $989.95 (USD) 
Free Shipping Free Shipping
Quantity:   
F2X/F3X 228/230/320/328/335/330/340/428/435/430/440i xDrive Bilstein B16 PSS10 Coilover System Bilstein's PSS10 coil over system combines adjustable monotube shock damper technology with front and rear height adjustments to give you everything you need in one package. The PSS10 kit is one of the most impressive suspensions on the market for performance and quality. Bilstein has engineered this kit to be functional and specific to the F2X/F3X chassis and not overloaded with features and bullet points that you'll never use. With the PSS10 you get 10 damper settings with meaningful differences between clicks, ride height adjustment, TUV certified quality and performance, a limited lifetime warranty, and easy fitment with stock mounts and links.

Bilstein PSS10 dampers feature their latest monotube design - a single large piston that performs better and lasts longer than other twin-tube designs. They also use a patented digressive valving system that helps give their shocks a better ride at any shock setting compared to competitor's progressive shocks. The PSS10 features 10 useful damper positions for rebound and compression - not hundreds of settings that you don't need or will never use. The settings range from 10 (softest) to 1 (stiffest) with meaningful variations between settings. This allows you to easily find a shock stiffness that best suits your driving environment and less wasted time trying separate adjustments and getting nowhere. The Bilstein PSS10 settings follow damper graphs and plots determined from their years of German performance tuning, including testing on the famed Nurburgring and Autobahn. Each setting is selected from a super-large knob at the bottom of each strut and shock - easily accessible from underneath the car. Each front strut is zinc coated for excellent wear resistance.

The Bilstein PSS10 kit remains one of our favorite suspensions simply because it works so well as an over-achieving street suspension. It's engineering greatly surpasses a regular shock/spring package and the quality surpasses many of the other aftermarket performance coil overs we see. This is our #1 choice for our customers who want a capable street suspension.


This item fits the following BMWs:
2016+ F22 BMW  228i xDrive, 230i xDrive
2013+ F30/34 BMW 320i xDrive, 328i xDrive, 335i xDrive, 330i xDrive, 340i xDrive
2014+ F32/36 BMW 428i xDrive, 435i xDrive, 430i xDrive, 440i xDrive,
Part #: 48-245463
Price: $2199.00 (USD) 
Quantity:   
Bilstein B16 PSS10 Coil Over Suspension - F30 320xi 328xi 335xi - F32 428xi 435xi - F22 228ix, M235xi

The B16 PSS10 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS10 offer 10 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P10) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS10. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

  • Largest available piston diameter for greater sensitivity and precise control.
  • Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
  • 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
  • Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
  • Weather resistant coating to resist oxidization, and ensure long life.
  • Lighter weight reduces wear and tear on suspension components.
  • Wrenches to adjust front and rear ride height included!


This coilover kit fits the following BMWs:
2014+ F22 BMW 228xi M235xi - Not for cars with EDC
2012+ F30 BMW 320xi 328xi 335xi - Sedan - Not for cars with EDC
2013+ F32 BMW 428xi 435xi - Coupe - Not for cars with EDC
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 428i xDrive Gran Coupe 435i xDrive Gran Coupe

Part #: 48-207287
Price: $2090.95 (USD) 
Free Shipping Free Shipping
Quantity:   
Bilstein Coil Over Spanner Wrench Set (Notch Style) Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).
Part #: 19101x
Price: $19.90 (USD) 
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.