BMW Electrical Sensors, Switches, & Relays for BMW 2 Series F22 (2014+)

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Add to Wish List

Qty

$ 859.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

For Vehicles With Motiv ReFlex Unit Currently Installed Only

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

ReFlex+ Install Harness - Flying Lead

T#:29201083

Part#: 900.1016

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal

Show More Show Less

ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport

T#:29201085

Part#: 200.1058

Ships in 5 Business Days

$ 794.00 USD

Add to Wish List

Qty

$ 794.00 USD

Add to Wish List

Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products.Â With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).

Show More Show Less

ReFlex Lite Injector Harness - Inline-4

T#:29234303

Part#: 900.1012

Ships in 5 Business Days

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-4 powered BMW! Includes x4 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

ReFlex Lite Injector Harness - Inline-6

T#:29234311

Part#: 900.1013

Ships in 5 Business Days

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

Motiv ReFlex+

T#:29101668

Part#: 910.1001

Ships in 5 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning

T#:29201087

Part#: 200.1103

Ships in 5 Business Days

$ 615.00 USD

Add to Wish List

Qty

$ 615.00 USD

Add to Wish List

Visconti Tuning teamed up with MOTIV as the first company to bring a plug-and-play harness to the community. After years of success and some of the fastest Supras and BMWs in the world using the harness, Visconti Tuning has improved upon an already fantastic offering.

Show More Show Less

Hitachi Camshaft Position Sensor - BMW E9X F3X F8X N20 N52 N55 S55 ...

T#:48815454

Part#: 13627525014

Ships in 6 Business Days

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

The camshaft position sensor communicates the position of the camshaft to the computer. This helps the computer to calculate proper spark and fuel control. If you're struggling with CELs, hard starts or no starts, stalling, and/or a rough idle, you may need to replace the cam position sensor.

Show More Show Less

Hitachi Engine Crankshaft Position Sensor - BMW F2X F3X

T#:48850074

Part#: 13627582842

Ships in 6 Business Days

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

Engine cranks but doesn't start? This sensor is often the issue.

Walker MAP Sensor - BMW N20 N26 S55 S63

T#:39059258

Part#: 13627843531

In Stock at Vendor

$ 163.99

This product was last offered at the strikethrough price on
04-10-2026

$ 135.99 USD

Add to Wish List

Qty

$ 135.99 USD

Add to Wish List

This is a replacement Manifold Absolute Pressure sensor Located on the charge air cooler. The MAP controls the amount of fuel that goes through the injectors based on the pressure of air at the intake manifold. If your vehicle is giving you a MAP code, replace it immediately to ensure you get the best gas mileage and performance. It is common for this part to fail slowly and cause poor fuel mileage and hampered performance. When it fails, the vehicle will stutter and stall as it falls into a limp mode. One way to check if your MAP is bad is to unplug the connector before starting your car. If it idles well (compared to a previous poor idle), your MAP sensor likely needs to be replaced. If you let this maintenance part go, your fuel economy will suffer as too much fuel is going into the engine and not being burned. A great way to give your vehicle an efficiency boost.

Show More Show Less

Hitachi Crankshaft Sensor - BMW B46 B48 B58

T#:48850081

Part#: 13627806782

Ships in 6 Business Days

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Tells the computer whether the timing is correct in the engine.

ReFlex Lite: Advanced Sequential Injector Controller - Inline-4 ...

T#:29234292

Part#: 910.1010

Back Ordered

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-4 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Hitachi Crankshaft Position Sensor - BMW N20 N26 2.0L

T#:48815475

Part#: 13627595860

Back Ordered

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

This is the crankshaft position sensor. It provides information for the ECU. A faulty sensor can cause issues with timing adjustment and limit performance and vehicle operation. Replace your sensor with a high-quality Hitachi sensor to restore peak performance.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Electrical Sensors, Switches, & Relays for BMW 2 Series F22 (2014+)

Sub-Categories

Motiv ReFlex+ for BMW

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

Motiv ReFlex+ Control Unit

ReFlex+ Install Harness - Flying Lead

ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport

ReFlex Lite Injector Harness - Inline-4

ReFlex Lite Injector Harness - Inline-6

Motiv ReFlex+

ReFlex+ Install Kit

ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning

Hitachi Camshaft Position Sensor - BMW E9X F3X F8X N20 N52 N55 S55 ...

Hitachi Engine Crankshaft Position Sensor - BMW F2X F3X

Walker MAP Sensor - BMW N20 N26 S55 S63

Hitachi Crankshaft Sensor - BMW B46 B48 B58

ReFlex Lite: Advanced Sequential Injector Controller - Inline-4 ...

Hitachi Crankshaft Position Sensor - BMW N20 N26 2.0L

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results