BMW Drivetrain Parts for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:
IRP Universal Short Shifter V3 CS (Centering Spring) - Black Reverse Button
IRP Universal Short Shifter V3 CS (Centering Spring) - Black Reverse ...
IRP - Individual Racing Parts - Corporate Logo
T#:569029
Part#: IRPSS-3BCS
In Stock
$ 475.99 USD
Free Shipping
Add to Wish List
$ 475.99 USD
Free Shipping
Add to Wish List
IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. The Universal Short Shifter V3 CS was developed to express their belief and compete with the much more expensive CAE Ultra Shifter, but at half the cost. The entire shifter assembly is made from all anodized aluminum and stainless steel for strength, durability, and looks. The V3 CS is a perfect replacement when looking for a shifter that gives you short, crisp, precise shifts with a 60% reduction in travel, plus a new return to center feature.
Show More Show Less
IRP BMW Short Shifter Dust Boot - For IRP V2, V3 & V3 CS Short Shifters
IRP BMW Short Shifter Dust Boot - For IRP V2, V3 & V3 CS Short Shifte...
IRP - Individual Racing Parts - Corporate Logo
T#:569037
Part#: IRPSS-DB
Ships in 5 Business Days
$ 52.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 52.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Developed specifically for the IRP V2, V3, and V3 CS Short shifters, this Dust Boot mounts to the short shifters base to keep out dirt and noise that would normally come through the otherwise unprotected opening in your center console.
Show More Show Less
Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW
Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW...
Burger Motorsports - Corporate Logo
T#:637547
Part#: BMS-DSBB-F
Ships in 2 Business Days
Starting at $ 129.00 USD
Free Shipping
Add to Wish List
Starting at $ 129.00 USD
Free Shipping
Add to Wish List
The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.
Show More Show Less
Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD
Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...
Condor Speed Shop - Corporate Logo
T#:597365
Part#: TRANSIX_F2XF3X
Ships in 2 Business Days
$ 34.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 34.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.
Show More Show Less
Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X E9X F2X F3X
Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...
DKM - Corporate Logo
T#:640069
Part#: MS-006-076
Ships on Aug 11, 2026
$ 1,299.99 USD
Free Shipping
Add to Wish List
$ 1,299.99 USD
Free Shipping
Add to Wish List
Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and a longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Organic Discs Steel Single Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
Show More Show Less
IRP Universal Short shifter V3 - Black Reverse Button
IRP Universal Short shifter V3 - Black Reverse Button
IRP - Individual Racing Parts - Corporate Logo
T#:401279
Part#: IRPSS-3B
Ships on Sep 28, 2026
$ 536.99 USD
Free Shipping
Add to Wish List
$ 536.99 USD
Free Shipping
Add to Wish List
The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V3 from IRP, the successor of the V2.
Show More Show Less
DKM MRX Ceramic Twin-Disc Clutch Kit W/ Flywheel - 215mm - E8X E9X F22/23 F3X N55
DKM MRX Ceramic Twin-Disc Clutch Kit W/ Flywheel - 215mm - E8X E9X F2...
DKM - Corporate Logo
T#:5987853
Part#: MRX-006-076
Ships on Aug 13, 2026
$ 1,799.99 USD
Add to Wish List
$ 1,799.99 USD
Add to Wish List
Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MRX Twin Ceramic Disc Clutch Kit is designed to hold up to 650 ft/lbs torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 215mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for upwards of 650 ft/lbs of torque **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
Show More Show Less
Rogue Engineering Rear Carrier Bushing Mount - F8X M2 M3 M4, F3X 3 & 4-Series (11/2014+)
Rogue Engineering Rear Carrier Bushing Mount - F8X M2 M3 M4, F3X 3 & ...
For vehicles with a production date from 11/2014+ and a manual transmission
Rogue Engineering - Corporate Logo
T#:48401514
Part#: RE.RCBM-F8X
Ships on Aug 13, 2026
$ 109.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 109.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Rogue Engineering rear shifter carrier bushing is specifically designed to fit the F8X chassis. It replaces the flimsy OEM bushing and secures the manual transmission carrier with a custom-molded urethane bushing in a CNC'd aluminium mount. By installing this bushing, it allows the shifter pattern to be more precise and accurate.
Show More Show Less
IRP V2 Short shifter - BMW 5 & 6 Speed
IRP V2 Short shifter - BMW 5 & 6 Speed
IRP - Individual Racing Parts - Corporate Logo
T#:401261
Part#: IRPSS-2B
Special Order: No Guaranteed ETA
$ 420.99 USD
Free Shipping
Add to Wish List
$ 420.99 USD
Free Shipping
Add to Wish List
The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V2 from IRP.
Show More Show Less
BMS Transmission Oil Cooler - BMW F-Chassis Gen 1 Oil Cooler
BMS Transmission Oil Cooler - BMW F-Chassis Gen 1 Oil Cooler ...
Burger Motorsports - Corporate Logo
T#:14915970
Part#: FG1B58TOC
Back Ordered
7% off MSRP $ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD
Free Shipping on orders $49 and up
Add to Wish List
7% off MSRP
$ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Everyone knows that high heat is the enemy of your automatic transmission. And that higher power levels generate more transmission fluid heat which will cause a trans slip. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity B58 Gen1 Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity front-mounted air to trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs within the front bumper behind the driver-side kidney grills providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW B58 Gen1 F chassis automatic car running larger than factory turbos. 165ºF (74ºC) transmission oil cooler Improved Racing thermostat included The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity included: (1) High capacity transmission oil cooler (2) Brackets (1) Billet adapter (2) Coolant plugs (1) Improved Racing 165F Thermostat + fittings (4)-10 AN crimped PTFE/SS/Nylon covered lines (6) M6x1.0x12mm bolts, washers and nuts (1) M6x1.0x20mm bolt Compatible with both RHD and LHD, RWD and AWD, ZF8HP50 and ZF8HP70 Transmissions.
Show More Show Less
DKM MSC Segmented Ceramic Twin-Disc Clutch Kit W/ Flywheel - 240mm - E8X E9X F22/23 F3X N55
DKM MSC Segmented Ceramic Twin-Disc Clutch Kit W/ Flywheel - 240mm - ...
DKM - Corporate Logo
T#:5987856
Part#: MSC-006-076
Special Order: No Guaranteed ETA
$ 1,699.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,699.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MSC Twin Ceramic Disc Clutch Kit is designed to hold 100% to 200% torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 240mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for 100-200% increased torque over stock **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
Show More Show Less
Billet Aluminum BMW DCT Transmission High Capacity Oil Pan
Billet Aluminum BMW DCT Transmission High Capacity Oil Pan
Burger Motorsports - Corporate Logo
T#:13036532
Part#: DCTPAN
Back Ordered
$ 599.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 599.00 USD
Free Shipping on orders $49 and up
Add to Wish List

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping