Revshift Polurethane Transmission Mount Set - 95A (Track - Green) - E...

T#:600155

Part#: PTM-BT

Ships in 3 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

95A Track (Green): Significantly stiffer and stronger than OEM rubber. Noticeable increase in NVH. Excellent for enthusiastically driven street and track cars.

IRP Universal Short Shifter V3 CS (Centering Spring) - Black Reverse ...

T#:569029

Part#: IRPSS-3BCS

In Stock

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. The Universal Short Shifter V3 CS was developed to express their belief and compete with the much more expensive CAE Ultra Shifter, but at half the cost. The entire shifter assembly is made from all anodized aluminum and stainless steel for strength, durability, and looks. The V3 CS is a perfect replacement when looking for a shifter that gives you short, crisp, precise shifts with a 60% reduction in travel, plus a new return to center feature.

Show More Show Less

Stage 2+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:211063

Part#: SB533H-2

In Stock

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

Tuning your N54/N55 with all of the bolt-on upgrades? Don't allow your clutch or flywheel let you down! The stock clutch is fine for a stock car or just a simple software upgrade. But anything more and it quickly becomes the weak link (especially with drag races or hard launches). The 135i/335i/535i/Z4 35i SPEC Stage 2+ clutch kit is perfect for owners who want a performance clutch that works great with simple bolt-on modifications and will have a minimum of downsides or trade-offs. SPEC has spent considerable time and effort on the 335i models to produce a performance clutch and flywheel package that holds up to track and drag strip demands but is also easy to live with for daily driving. This clutch kit is meant to be used only with a SPEC flywheel. Features: The flywheel has a peak torque rating of 545ft-lbs Limitations of the stock flywheel are eliminated Self-adjusting, like the factory design, and the engagement point can be adjusted Sprung hub clutch to be used with the single-mass flywheel with near-stock levels of noise, vibration, and refinement **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW...

T#:637547

Part#: BMS-DSBB-F

Back Ordered

Starting at $ 129.00 USD

Add to Wish List

Starting at $ 129.00 USD

Add to Wish List

The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - ...

T#:1002349

Part#: 228053410

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

F-Chassis B58 SPEC Billet Aluminum Flywheel

T#:7036582

Part#: SBB58A-2

In Stock

$ 749.00 USD

Add to Wish List

Qty

$ 749.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

For Use with SPEC Single Mass Flywheel SBB58A-2 or SBB58S-2 Only!

T#:397226

Part#: SB531-2

In Stock

10% off MSRP $ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

Add to Wish List

Qty

10% off MSRP

$ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

Add to Wish List

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

When it's time to replace your car's clutch, you face a crucial decision: upgrade or stick with stock? In many cases, upgrading is the preferred choice, especially when you pair the right clutch with a single mass flywheel. The secret to achieving the perfect blend of performance and driving experience lies in selecting a sprung hub clutch. This option allows you to enjoy the advantages of a single mass flywheel while eliminating issues like noise, vibration, and harshness (NVH), ensuring an outstanding driving performance.

Show More Show Less

Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55

T#:597416

Part#: SB55S-2

Back Ordered

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW ...

T#:1002348

Part#: 228053400

Back Ordered

$ 296.99 USD

Add to Wish List

Qty

$ 296.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

Stage 3 Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:394254

Part#: SB533-2

In Stock at Vendor

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)

Show More Show Less

Spec 12-16 BMW 335i (F30) Stage 2+ Clutch Kit

T#:597413

Part#: SB553H-2

In Stock at Vendor

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

BMW N54 N55 B58 SPEC Stage 2 Performance Clutch Kit (for SPEC single-...

T#:341710

Part#: SB532-2

In Stock

$ 790.99 USD

Add to Wish List

Qty

$ 790.99 USD

Add to Wish List

SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding drivability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.

Kit includes:

Pressure plate
Clutch disc
Pilot bearing
Clutch Release Bearing
Clutch Alignment Tool
Clutch fork
Designed to be used with billet single mass flywheel

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BM...

T#:1002350

Part#: 228053420

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

IRP Universal Short shifter V3 - Black Reverse Button

T#:401279

Part#: IRPSS-3B

Ships on Jan 11, 2027

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V3 from IRP, the successor of the V2.

Show More Show Less

Red Line Manual Transmission/Differential Fluid 75W-90

T#:394833

Part#: REDLINE25A

In Stock

Starting at $ 97.99 USD

Add to Wish List

Starting at $ 97.99 USD

Add to Wish List

Red Line MTL may be used in transmissions which recommend 75W, 80W, or 85W GL-4 gear oils, or SAE 30 or 5W/10W30 motor oils. If a 90W GL-4 or SAE 40, 10W40, or 15W40 is required, MT-90 may be used. If the transmission or transaxle requires an SAE 90 GL-5 gear oil, then Red Line 75W90NS or 75W140NS Gear Oil may be used.

Show More Show Less

SPEC Billet Steel Flywheel (F-Chassis B58)

T#:7036583

Part#: SBB58S-2

In Stock

$ 748.00 USD

Add to Wish List

Qty

$ 748.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

9" Twin Disc Clutch Kit - Solid Organic Discs

T#:17804817

Part#: XKBM23596-2G

Special Order: No Guaranteed ETA

$ 2,057.99 USD

Add to Wish List

Qty

$ 2,057.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. Designed specifically for high horsepower, street driven vehicles, the 9" twin disc organic is the ultimate street clutch. The twin disc organic upgrade optimizes pedal feel and reliability in high horsepower street driven vehicles. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Organic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Organic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:209171

Part#: SB533F-2

In Stock

$ 979.00 USD

Add to Wish List

Qty

$ 979.00 USD

Add to Wish List

The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)

Show More Show Less

Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...

T#:640069

Part#: MS-006-076

In Stock

$ 1,299.99 USD

Add to Wish List

Qty

$ 1,299.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and a longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Organic Discs Steel Single Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

IRP V2 Short shifter - BMW 5 & 6 Speed

T#:401261

Part#: IRPSS-2B

Special Order: No Guaranteed ETA

$ 420.99 USD

Add to Wish List

Qty

$ 420.99 USD

Add to Wish List

The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V2 from IRP.

Show More Show Less

9" Performance Clutch Kit - Single Sprung Organic Disc

T#:17804815

Part#: XKBM24566-1A

Back Ordered

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

The XClutch 10 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. XClutch sprung organic kits offer excellent dampening and the highest levels of driveability in the range. They are ideal for performance street use. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 7/16" Clutch Disc Spline - 26 Disc Material - Organic Disc Type - Sprung Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Recessed Flywheel Step - -0.375 Assembly Weight Maximum Torque Capacity - 440 Recommended Use - Street Use Includes Single Mass Flywheel 1 Sprung Organic Disc Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease Pilot Bearing With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9" Performance Clutch Kit - Ceramic Race Single Disc

T#:17804814

Part#: XKBM24566-1R

Back Ordered

$ 1,540.99 USD

Add to Wish List

Qty

$ 1,540.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The Stage 2R ceramic kit is a single disc, race-only clutch. Available for a wide variety of vehicles, the Stage 2R clutch provides a higher torque and heat capacity over the Stage 2 equivalents. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 7/16" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Sprung Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Recessed Flywheel Step - -0.364 Assembly Weight Maximum Torque Capacity - 670 Recommended Use - Track Use Includes Single Mass Flywheel 1 Sprung Ceramic Disc Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease Pilot Bearing With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9" Twin Disc Clutch And Flywheel Kit - Twin Sprung Carbon Discs ...

For Vehicles with Production Date Up to 01/09 with 8 Bolt Crank

T#:26904953

Part#: XKBM23595-2P

Ships in 2 Business Days

$ 3,116.99 USD

Add to Wish List

Qty

$ 3,116.99 USD

Add to Wish List

The XClutch 9" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 26 Disc Material - Carbon Disc Type - Sprung Solid : Sprung Input Shaft Diameter - 1 3/8" Flywheel Step - +.087mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9" Twin Disc Clutch Kit - Solid Carbon Blade Discs

T#:17804816

Part#: XKBM23596-2P

Ships in 2 Business Days

$ 3,116.99 USD

Add to Wish List

Qty

$ 3,116.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch carbon series is designed to offer the highest heat capacity and is designed specifically for high horsepower race cars where mass and inertia are critical. The carbon series is designed for motorsport use only. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Carbon Blade Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 1230 Recommended Use - Motorsports only Includes Single Mass Flywheel 2 Solid Carbon Blade Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

8" Twin Disc Clutch And Flywheel Kit - Twin Solid Ceramic Discs ...

T#:26771698

Part#: XKBM20524-2E

Ships in 2 Business Days

$ 2,619.99 USD

Add to Wish List

Qty

$ 2,619.99 USD

Add to Wish List

The XClutch 8" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Sprung Solid : Sprung Input Shaft Diameter - 1 3/8" Flywheel Step - +.087mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Ceramic Clutch Disc 1 Solid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9" Twin Disc Clutch And Flywheel Kit - Twin Sprung Carbon Discs ...

T#:26904952

Part#: XKBM23594-2P

Ships in 2 Business Days

$ 3,116.99 USD

Add to Wish List

Qty

$ 3,116.99 USD

Add to Wish List

The XClutch 9" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 26 Disc Material - Carbon Disc Type - Sprung Solid : Sprung Input Shaft Diameter - 1 3/8" Flywheel Step - +.087mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

SPEC SS Trim Super Twin Performance Clutch Kit W/ Billet Steel Flywhe...

T#:41222046

Part#: SBB58SST

Ships in 3 Business Days

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The Super Twin clutch kits from SPEC Clutch are for street and track use in cars with extreme horsepower and torque (700-1500 ft lbs tq). This SS Trim kit is rated by SPEC for 923 ft-lbs of torque. The Super Twin offers near-stock drivability, tremendous life expectancy, a no-shimming/setup bolt-in installation, and maintenance-free operation. SPEC Clutch recommends this clutch kit for all types of driving.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Drivetrain Parts for BMW 2 Series F22 (2014+)

Sub-Categories

Revshift Polurethane Transmission Mount Set - 95A (Track - Green) - E...

IRP Universal Short Shifter V3 CS (Centering Spring) - Black Reverse ...

Stage 2+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW...

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - ...

F-Chassis B58 SPEC Billet Aluminum Flywheel

Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW ...

Stage 3 Performance Clutch Kit (for SPEC single-mass flywheel) ...

Spec 12-16 BMW 335i (F30) Stage 2+ Clutch Kit

BMW N54 N55 B58 SPEC Stage 2 Performance Clutch Kit (for SPEC single-...

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BM...

IRP Universal Short shifter V3 - Black Reverse Button

Red Line Manual Transmission/Differential Fluid 75W-90

SPEC Billet Steel Flywheel (F-Chassis B58)

9" Twin Disc Clutch Kit - Solid Organic Discs

Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...

IRP V2 Short shifter - BMW 5 & 6 Speed

9" Performance Clutch Kit - Single Sprung Organic Disc

9" Performance Clutch Kit - Ceramic Race Single Disc

9" Twin Disc Clutch And Flywheel Kit - Twin Sprung Carbon Discs ...

9" Twin Disc Clutch Kit - Solid Carbon Blade Discs

8" Twin Disc Clutch And Flywheel Kit - Twin Solid Ceramic Discs ...

9" Twin Disc Clutch And Flywheel Kit - Twin Sprung Carbon Discs ...

SPEC SS Trim Super Twin Performance Clutch Kit W/ Billet Steel Flywhe...

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results