BMW Performance Flash Software, 2005+ Models for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

The Fastest Way To More Power - Up To 120hp!!!

Our Performance Software makes more horsepower and torque with no downsides! Performance software is the icing on the cake, the finishing touch, or the capstone for your BMW tuning project. Software ties it all together - maximizing output from upgrades where the factory software can't keep up. The factory software is actually programmed around 87 octane which de-tunes the performance of the car. Our software is set to 91 as a mimimum, allowing us to be more aggressive with the programming. We can refine and adjust the factory limitations, opening up the potential for more horsepower or refinement from your current upgrades. We also tune the software to fix defects and rough edges in the stock software, making the car easier and more enjoyable to drive.

We have been tuning BMW software since 1995, making us one of the most experienced BMW tuners in North America. Over the years we have experimented and tested many different forms and brands of performance software, including developing our own on our Dynapack chassis dyno. Our Performance Software catalog includes tunes and upgrades that best suit your BMW and your upgrade goals.

Turner Motorsport Performance Flash Software features:
+ dyno developed, real-world tested
+ ignition and fuel timing adjustments
+ cam timing, including VANOS and Valvetronic
+ raised rev limit*
+ top speed de-limited*
+ part throttle and full throttle mapping
+ improved throttle response
+ specific software for most major upgrades - cold-air intakes, sport exhaust, etc
+ race software for removing catalytic converters**


* - on select models
** - not legal for street use, emissions liability waiver required
Sort By:
BM3 Wireless OBDII WiFi ENET CANBUS Flash Adapter - BMW F & G Chassis
BM3 Wireless OBDII WiFi ENET CANBUS Flash Adapter - BMW F & G Cha...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bootmod3 - Corporate Logo
T#:33746523
Part#: OBD2FA
Ships in 6 Business Days
$ 99.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 99.00 USD
Free Shipping on orders $49 and up
Add to Wish List

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all-new bootmod3 Wireless Adapter.

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:

  • Fastest flash times over ENET and CANBUS
  • Reliable and consistent connectivity
  • Ability to configure your own WiFi password.

    • Most if not all other WiFi OBD adapters leave open WiFi access to your OBD port which is a security issue for your vehicle. With bootmod3 you can set/change to your own custom WiFi password securing access.
  • Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
  • Wireless CANBUS Support
    • Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing the need for additional WiFi adapters or DCAN cables
  • NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
    • Enters ultra-low power mode if left plugged in consuming just ~20mA
  • OTA updates through the new bootmod3 app
  • Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
  • Manual Toggle switch to fully power down the adapter
  • Small form factor, considerably smaller than generic WiFi ENET adapters
  • No VIN locking, can be used on multiple vehicles

Vehicles Supported:

  • All BMW F and G series vehicles
  • 2014+ Mini
  • 2020+ Toyota Supra (A90 A91)

Supported 3rd Party Applications:

  • OEM factory diagnostics such as ISTA and ESYS
  • XHP App
  • Bimmercode App
  • Bimmerlink App
  • ProTool App
  • ...and other apps requiring ENET and UDS to CANBUS support

When connected on iOS, copy your WiFi settings from Automatic to Manual and leave the Router field empty. This leaves your Mobile data connection active while connected with the vehicle.

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Show More Show Less
Motiv ReFlex+ for BMW
Motiv ReFlex+ for BMW
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:17970629
Part#: RFXF02UI6
In Stock
$ 859.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 859.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less
BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor
BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:28537533
Part#: 101-0216
In Stock
$ 105.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 105.00 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

  • Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
  • Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
  • Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
  • High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less
F/G Chassis Kies WiFi ENET Adapter
F/G Chassis Kies WiFi ENET Adapter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Kies Motorsports - Corporate Logo
T#:4319895
Part#: KIES07-WIFI-AD
In Stock
$ 99.99 USD
Free Shipping
Add to Wish List
$ 99.99 USD
Free Shipping
Add to Wish List
A Wireless ENET Adapter tool, powered directly by your OBD!
ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport
ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29201085
Part#: 200.1058
Ships in 5 Business Days
$ 794.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 794.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products. With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).
Show More Show Less
Motiv ReFlex+ Control Unit
Motiv ReFlex+ Control Unit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
Ships in 7 Business Days
$ 729.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 729.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less
Motiv ReFlex+
Motiv ReFlex+
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29101668
Part#: 910.1001
Ships in 5 Business Days
$ 849.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 849.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less
RaceChip XLR5 - BMW & MINI Cooper
RaceChip XLR5 - BMW & MINI Cooper
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Race Chip - Corporate Logo
T#:38688929
Part#: 999982BMW
Special Order: No Guaranteed ETA
$ 259.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 259.00 USD
Free Shipping on orders $49 and up
Add to Wish List
With the RaceChip XLR5, you can easily tune your car's throttle response via app to your taste – from a comfortable sedan to a racy sports car. That makes it the perfect add-on to our chip tuning boxes.
Show More Show Less
ReFlex+ Install Kit
ReFlex+ Install Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29267513
Part#: 400.1001
In Stock
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Weistec BMW N20 W.1 ECU Tune
Weistec BMW N20 W.1 ECU Tune
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Weistec - Corporate Logo
T#:22690738
Part#: 05-420-00101-3KT
Ships in 8 Business Days
$ 999.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 999.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Increase of +62 Horsepower, and +65 Torque! Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!
Weistec BMW B58 W.1 ECU Tune
Weistec BMW B58 W.1 ECU Tune
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Weistec - Corporate Logo
T#:22789667
Part#: 05-458-00106-9KT
In Stock at Vendor
$ 1,599.00 USD
Free Shipping
Add to Wish List
$ 1,599.00 USD
Free Shipping
Add to Wish List
Increase of +101 Horsepower, and +102 Torque, Eliminate top speed limiter, Increased throttle response. W.1 Tunes are designed for completely stock vehicles with no other modifications!
Weistec BMW B58 W.2 ECU Tune
Weistec BMW B58 W.2 ECU Tune
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Weistec - Corporate Logo
T#:22789668
Part#: 05-458-00107-0KT
In Stock at Vendor
$ 1,699.00 USD
Free Shipping
Add to Wish List
$ 1,699.00 USD
Free Shipping
Add to Wish List
Increase of +126 Horsepower, and +127 Torque! Eliminate top speed limiter, Increased throttle response. W.2 Tunes are designed for vehicles with performance high-flow exhausts!
ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning
ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Motiv Motorsports - Corporate Logo
T#:29201087
Part#: 200.1103
Ships in 5 Business Days
$ 795.00

This product was last offered at the strikethrough price on
01-05-2026

$ 615.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 615.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Visconti Tuning teamed up with MOTIV as the first company to bring a plug-and-play harness to the community. After years of success and some of the fastest Supras and BMWs in the world using the harness, Visconti Tuning has improved upon an already fantastic offering.
Show More Show Less
Weistec BMW N20 W.2 ECU Tune
Weistec BMW N20 W.2 ECU Tune
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Weistec - Corporate Logo
T#:22690739
Part#: 05-420-00102-4KT
Ships in 8 Business Days
$ 1,099.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,099.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Increase of +90 Horsepower, and +90 Torque! Eliminate top speed limiter, Increased throttle response. W.2 Tunes are designed for vehicles with performance exhausts & high-flow air filters!

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

  • Performance Flash Software

Brand

Price

$
$

Shipping