Clutch Switch

2X Entries Into Our F80 M3 Sweepstakes

T#:31092583

Part#: 35426876898

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

LUK Clutch Fork Lever

We Price Match - Give Us A Call or Chat!

T#:555117

Part#: 21517564027

In Stock

$ 30.99

This product was last offered at the strikethrough price on
10-17-2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Should be replaced during a clutch service

Stage 2+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:211063

Part#: SB533H-2

In Stock

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

Tuning your N54/N55 with all of the bolt-on upgrades? Don't allow your clutch or flywheel let you down! The stock clutch is fine for a stock car or just a simple software upgrade. But anything more and it quickly becomes the weak link (especially with drag races or hard launches). The 135i/335i/535i/Z4 35i SPEC Stage 2+ clutch kit is perfect for owners who want a performance clutch that works great with simple bolt-on modifications and will have a minimum of downsides or trade-offs. SPEC has spent considerable time and effort on the 335i models to produce a performance clutch and flywheel package that holds up to track and drag strip demands but is also easy to live with for daily driving. This clutch kit is meant to be used only with a SPEC flywheel. Features: The flywheel has a peak torque rating of 545ft-lbs Limitations of the stock flywheel are eliminated Self-adjusting, like the factory design, and the engagement point can be adjusted Sprung hub clutch to be used with the single-mass flywheel with near-stock levels of noise, vibration, and refinement **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

F-Chassis B58 SPEC Billet Aluminum Flywheel

T#:7036582

Part#: SBB58A-2

In Stock

$ 749.00 USD

Add to Wish List

Qty

$ 749.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

For Use with SPEC Single Mass Flywheel SBB58A-2 or SBB58S-2 Only!

T#:397226

Part#: SB531-2

In Stock

10% off MSRP $ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

Add to Wish List

Qty

10% off MSRP

$ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

Add to Wish List

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

When it's time to replace your car's clutch, you face a crucial decision: upgrade or stick with stock? In many cases, upgrading is the preferred choice, especially when you pair the right clutch with a single mass flywheel. The secret to achieving the perfect blend of performance and driving experience lies in selecting a sprung hub clutch. This option allows you to enjoy the advantages of a single mass flywheel while eliminating issues like noise, vibration, and harshness (NVH), ensuring an outstanding driving performance.

Show More Show Less

Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55

T#:597416

Part#: SB55S-2

Back Ordered

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Stage 3 Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:394254

Part#: SB533-2

In Stock at Vendor

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)

Show More Show Less

Spec 12-16 BMW 335i (F30) Stage 2+ Clutch Kit

T#:597413

Part#: SB553H-2

In Stock at Vendor

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

BMW N54 N55 B58 SPEC Stage 2 Performance Clutch Kit (for SPEC single-...

T#:341710

Part#: SB532-2

In Stock

$ 790.99 USD

Add to Wish List

Qty

$ 790.99 USD

Add to Wish List

SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding drivability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.

Kit includes:

Pressure plate
Clutch disc
Pilot bearing
Clutch Release Bearing
Clutch Alignment Tool
Clutch fork
Designed to be used with billet single mass flywheel

Show More Show Less

SPEC Aluminum Flywheel (SMF) (FOR USE WITH SPEC CLUTCH ONLY) 135 N55 ...

T#:597417

Part#: SB55A-2

In Stock

$ 637.00 USD

Add to Wish List

Qty

$ 637.00 USD

Add to Wish List

BMW / Supra A90 Stage 4 Performance Clutch Kit (for SPEC single-mass ...

T#:568757

Part#: SB534-2

Ships in 3 Business Days

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

SPEC Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

for use with SPEC billet flywheel

T#:35525717

Part#: SB551-2

Back Ordered

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

SPEC Billet Steel Flywheel (F-Chassis B58)

T#:7036583

Part#: SBB58S-2

In Stock

$ 748.00 USD

Add to Wish List

Qty

$ 748.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

Clutch Kit B58 & N62 Engine

We Price Match - Give Us A Call or Chat!

T#:381011

Part#: 21207573789

Ships in 2 Business Days

$ 587.53 USD

Add to Wish List

Qty

$ 587.53 USD

Add to Wish List

Upgrade your BMW B58 or N62 engine with the Clutch Kit designed for optimal performance.

This premium clutch kit ensures smooth engagement and reliable power transfer, perfect for high-performance driving.

Specifically designed for BMW B58 and N62 engines
Ensures smooth engagement for precise shifting
Reliable power transfer for enhanced driving experience
Durable construction for long-lasting performance
Easy installation process for hassle-free upgrade

Show More Show Less

LUK Clutch Kit - 6 Speed Transmission - E60, E61, E90, E92

We Price Match - Give Us A Call or Chat!

T#:11524

Part#: 21207567624

Ships in 1 Business Day

$ 515.01 USD

Add to Wish List

Qty

$ 515.01 USD

Add to Wish List

NOW LOCATED UNDER T#339958

Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:209171

Part#: SB533F-2

In Stock

$ 979.00 USD

Add to Wish List

Qty

$ 979.00 USD

Add to Wish List

The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)

Show More Show Less

Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...

T#:640069

Part#: MS-006-076

In Stock

$ 1,299.99 USD

Add to Wish List

Qty

$ 1,299.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and a longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Organic Discs Steel Single Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

URO Brass Clutch Fork Pivot Pin - Multiple BMWs

2X Entries Into Our F80 M3 Sweepstakes

T#:568391

Part#: 21511223328

In Stock

$ 11.19 USD

Add to Wish List

Qty

$ 11.19 USD

Add to Wish List

When replacing a clutch it is a good idea to replace all the components possible while you are in there. You don't want to have to drop the exhaust, and transmission again to replace a <$20 gasket, bolt or pivot pin. This part is a brass URO clutch pivot pin that will hold up longer and wear down slower than the Genuine BMW plastic pin. It provides a fulcrum for the clutch release arm for many BMW's.

Show More Show Less

LUK Clutch Kit - 6-Speed Transmission - 21207625147

We Price Match - Give Us A Call or Chat!

T#:29234297

Part#: 21207625147

Ships in 1 Business Day

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

Slipping, chattering, and difficulty shifting gears are clear indicators of a worn-out clutch and pressure plate. If left unaddressed, these issues can worsen and eventually render your vehicle inoperable. This kit includes a new Sachs clutch disc, pressure plate, and throwout bearing. Replacing these components, located in the transmission bell housing, will restore your car’s performance and reliability.

Show More Show Less

SPEC SS Trim Super Twin Performance Clutch Kit W/ Billet Steel Flywhe...

T#:41222046

Part#: SBB58SST

Ships in 3 Business Days

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The Super Twin clutch kits from SPEC Clutch are for street and track use in cars with extreme horsepower and torque (700-1500 ft lbs tq). This SS Trim kit is rated by SPEC for 923 ft-lbs of torque. The Super Twin offers near-stock drivability, tremendous life expectancy, a no-shimming/setup bolt-in installation, and maintenance-free operation. SPEC Clutch recommends this clutch kit for all types of driving.

Show More Show Less

DKM MSC Segmented Ceramic Twin-Disc Clutch Kit W/ Flywheel - 240mm - ...

T#:5987856

Part#: MSC-006-076

Special Order: No Guaranteed ETA

$ 1,699.99 USD

Add to Wish List

Qty

$ 1,699.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MSC Twin Ceramic Disc Clutch Kit is designed to hold 100% to 200% torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 240mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for 100-200% increased torque over stock **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Clutch Kits & Parts for BMW 2 Series F22 (2014+)

Sub-Categories

Clutch Switch

LUK Clutch Fork Lever

Stage 2+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

F-Chassis B58 SPEC Billet Aluminum Flywheel

Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55

Stage 3 Performance Clutch Kit (for SPEC single-mass flywheel) ...

Spec 12-16 BMW 335i (F30) Stage 2+ Clutch Kit

BMW N54 N55 B58 SPEC Stage 2 Performance Clutch Kit (for SPEC single-...

SPEC Aluminum Flywheel (SMF) (FOR USE WITH SPEC CLUTCH ONLY) 135 N55 ...

BMW / Supra A90 Stage 4 Performance Clutch Kit (for SPEC single-mass ...

SPEC Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

SPEC Billet Steel Flywheel (F-Chassis B58)

Clutch Kit B58 & N62 Engine

Upgrade your BMW B58 or N62 engine with the Clutch Kit designed for optimal performance.

LUK Clutch Kit - 6 Speed Transmission - E60, E61, E90, E92

Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

Stage 3 Performance Twin Disc Clutch Kit - Single Mass Flywheel - E8X...

URO Brass Clutch Fork Pivot Pin - Multiple BMWs

LUK Clutch Kit - 6-Speed Transmission - 21207625147

SPEC SS Trim Super Twin Performance Clutch Kit W/ Billet Steel Flywhe...

DKM MSC Segmented Ceramic Twin-Disc Clutch Kit W/ Flywheel - 240mm - ...

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results