Turbos for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

If more boost and reliability are your goals choose from one of our BMW turbo upgrades. Our turbo upgrades range from stock turbos rebuilt with stronger internals to all-new, ground-up turbo upgrades. BMW turbos such as the N54 are capable of really impressive power numbers on stock engine internals but the factory turbos lack the precise tolerances and reliability that an upgraded unit will deliver. In other words, the stock turbos can only do so much and if big power (>400whp) is your goal a turbo upgrade must be in your plans. Our partners are leading experts in turbo technology and upgrades. Each Stage has been professionally developed and tested. Additional upgrades and tuning may be, or is, required. Contact us for more details on tuning options.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
In Stock
$ 51.99 USD
Free Shipping on orders $49 and up
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!
Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less
Dinan - Corporate Logo
T#:8076778
Part#: D760-0061
In Stock
11% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD
Free Shipping
11% off MSRP
$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD
Free Shipping
Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. More Flow: Up to 24% greater than stock. 24% increase in overall volume over OEM inlet. Average of 10.8% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:398463
Part#: VTT-N55-INSTL
Ships in 1 Business Day
$ 222.99 USD
Free Shipping
$ 222.99 USD
Free Shipping

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos! 

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:638811
Part#: VTT-B58-VACCUM
Ships in 10 Business Days
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:591365
Part#: VTT-B58-GC-1
Ships in 10 Business Days
$ 1,858.99 USD
Free Shipping
$ 1,858.99 USD
Free Shipping
This kit is a simple drop in stock replacement that will take your B58 to the next level. Supports up to 600whp.

Vargas Turbo Technologies - Corporate Logo
T#:390086
Part#: N55-STG1-PWG-NEW
Ships in 10 Business Days
$ 1,258.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,254.00 USD
Free Shipping
$ 1,254.00 USD
Free Shipping
Vargas Turbo Technologies - Corporate Logo
T#:15677573
Part#: VTT-N55-INSTL-2
Ships in 10 Business Days
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
Includes gaskets and O-rings necessary to install your new N55 turbo! If you need studs, manifold gaskets, downpipe gasket, and copper nuts, see T#398463 for the full install kit

Vargas Turbo Technologies - Corporate Logo
T#:3872390
Part#: VTTB58GC/GC+TURB
Ships in 10 Business Days
$ 2,094.99 USD
Free Shipping
$ 2,094.99 USD
Free Shipping

Elevate your BMW B58 engine to new heights with the VTT B58 "GC" Turbocharger Upgrade. Say goodbye to core charges, long lead times, and restrictive factory housings. VTT's 100% new casting B58 GC and GC+ turbocharger upgrades retain the factory B58 turbo's great design elements while addressing shortcomings like the small inlet area and bearing housing. The result is a turbocharger upgrade supporting over 600WHP, maintaining factory spool, and utilizing all factory connections. Experience serious B58 power effortlessly with the VTT GC Turbo Upgrade.

  • 100% new casting for OE quality
  • Supports over 600WHP
  • Retains factory spool and connections
  • Improved design elements for enhanced performance
  • Easy drop-in B58 turbocharger upgrade
  • Includes 4' Aluminum Connector & Install Kit
Show More Show Less

Vargas BMW N55 EWG GC Turbo
For vehicles with production date after 07/2013 - vehicle must have Electronic Wastegat...
For vehicles with Electronic Wastegate (EWG)
Vargas Turbo Technologies - Corporate Logo
T#:15677575
Part#: VTT-N55-GC-EWG
Ships in 10 Business Days
$ 2,761.99 USD
Free Shipping
$ 2,761.99 USD
Free Shipping
Supported Power level: 600 WHP! Wastegate Style: External Wastegate (EWG) No need to deal with core charges, or other manufcaturers that maintain the factory housing. Vargas casts their GC turbo to OE quality using their 100% new casting. Casting maintains some good design elements of the OE N55 turbo, but improves on some elements that plague the factory N55 turbo such as: small factory inlet, bearing housing oil structure, thrust bearing, and more. Make 600+ WHP while keeping the OE spool feel and take advantage of provisions for all factory connections including oil, water, downpipe, and charge pipe. Tune will be necessary to run your N55 GC turbo.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:28770031
Part#: VTT-N20-STG1-NEW
Ships in 10 Business Days
$ 1,519.99 USD
Free Shipping on orders $49 and up
WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. Replace that old worn out N20 turbocharger with the latest and greatest technology from Vargas Turbo Technologies!
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Ships in 10 Business Days
Sale - Save 1% $ 1,545.99

This product was last offered at the strikethrough price on
06-15-2026

Starting at $ 1,536.90 USD
Free Shipping
Sale - Save 1%
$ 1,545.99

This product was last offered at the strikethrough price on
06-15-2026

Starting at $ 1,536.90 USD
Free Shipping

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.
Vargas Turbo Technologies - Corporate Logo
T#:390263
Part#: VTTN20-350
Ships on Aug 6, 2026
Starting at $ 1,977.00 USD
Free Shipping
Starting at $ 1,977.00 USD
Free Shipping

Vargas Stage 1 N20 turbo upgrade is good up to 350whp with proper tuning and high grade fuel. Vargas N20 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N20.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 350. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less
Dinan - Corporate Logo
T#:403061
Part#: D-310-0110A
Back Ordered
11% off MSRP $ 2,137.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,899.99 USD
Free Shipping
11% off MSRP
$ 2,137.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,899.99 USD
Free Shipping

For the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your EWG N55 engine. The compressor wheel inside the turbocharger is increased in size allowing ~30% greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency.These are fully cast turbos that are manufactured to Dinan specifications along with an upgraded thrust system over the stock turbo to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with DINANTRONICS Stage 4, as well as Dinan’s intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended. 

Benefits of the Dinan Big Turbo for the EWG N55 Engine:

  • Fully cast turbo that is manufactured to Dinan specifications with an upgraded thrust system thereby avoiding lengthy turnaround times caused by a core exchange program. 
  •  Larger billet compressor/impeller wheel that allows ~30% greater flow over stock which then enables additional boost to be realized while retaining efficiency.
  • Turbo assembly is compatible with electric wastegate vehicles only.
  • Peak power: 445 HP @ 6000 RPM and 455 ft-lbs @ 3000 RPM and a max gain of 128 HP @ 6000 RPM and 113 ft-lbs @ 6000 RPM when coupled with other Dinan Performance upgrades. (Data from F22 M235i.) 448 HP @ 6500 RPM and 417 ft-lbs @ 3000 RPM and a max gain of 152 HP @ 6500 RPM and 123 ft-lbs @ 6500 RPM when coupled with other Dinan Performance upgrades. (Data from F32 435i. Other variants may differ.) 
  •  Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). 
  • Includes o-rings and gaskets needed for complete installation on a RWD vehicle only. If installing on an xDrive vehicle Dinan P/N D313-0117 is required for additional installation hardware.
  •  Factory matching new car warranty (4yr/50k) when run in Dinan specification.
  • 50 State Emissions legal; CARB EO # D-176-49.
Show More Show Less

N55 Big Turbo Upgrade - F2X / F3X / F87 M2
Call In Or Chat For Best Price!
CARB certified for sale in all 50 states
Dinan - Corporate Logo
T#:15544960
Part#: D310-0110A
EO#: D-176-52
Back Ordered
11% off MSRP $ 2,137.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,899.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 2,137.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,899.99 USD
Free Shipping on orders $49 and up

Elevate Turbocharger Performance with Upgraded Kit

Upgrade your turbocharger's performance with this kit, presenting an impressive 30% increase in the compressor wheel size within the stock turbocharger housing. Experience a significant power boost by elevating pressure at high RPMs while maintaining efficient operation. The enhanced thrust system ensures prolonged turbocharger life, and for optimized performance, consider pairing it with Stage 4 Dinan software to manage the additional boost.

Key Features:

  • Increases compressor size by 30%
  • Boosts power through increased boost pressure
  • Upgraded thrust system for turbocharger longevity
  • DINANTRONICS Stage 4 software recommended for optimal engine performance
  • Earns 2 points towards your Dinan badge

With over 35 years of expertise, Dinan leads BMW tuning advancements, prioritizing balanced enhancements that preserve the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan parts undergo rigorous testing, ensuring reliability. Upon significant part installation, enthusiasts receive an exclusive trunk badge, signifying the transition to Dinan performance.

Show More Show Less

Burger Motorsports - Corporate Logo
T#:49857410
Part#: BMSB58THS
Ships on Aug 6, 2026
New Item
$ 119.00 USD
Free Shipping on orders $49 and up
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less
Burger Motorsports - Corporate Logo
T#:49857413
Part#: BMSG2B58THS
Ships on Aug 6, 2026
New Item
$ 119.00 USD
Free Shipping on orders $49 and up
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series ...
For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos
Vargas Turbo Technologies - Corporate Logo
T#:52129707
Part#: VTT-FAB-064
Ships in 10 Business Days
New Item
$ 49.99 USD
Free Shipping
$ 49.99 USD
Free Shipping
The VTT-FAB-064 by Vargas is a precision-engineered solution for enthusiasts and fabricators building high-performance Garrett-based turbo systems.
Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...
For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos
Vargas Turbo Technologies - Corporate Logo
T#:52129710
Part#: VTT-FAB-081
Ships in 10 Business Days
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.

Vargas Turbo Technologies - Corporate Logo
T#:52094552
Part#: VTT-DCS-EWG-W-AC
Ships in 10 Business Days
New Item
$ 1,049.99 USD
Free Shipping
$ 1,049.99 USD
Free Shipping
the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Vargas Turbo Technologies - Corporate Logo
T#:52094592
Part#: VTT-FAB-063
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.
Vargas Turbo Technologies - Corporate Logo
T#:52094555
Part#: VTT-FAB-015
Ships in 10 Business Days
New Item
$ 21.99 USD
Free Shipping
$ 21.99 USD
Free Shipping
The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.
Vargas Turbo Technologies - Corporate Logo
T#:52094591
Part#: VTT-FAB-062
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.


Vargas Turbo Technologies - Corporate Logo
T#:51778114
Part#: VTT-FAB-BMW-EWG-
Ships in 10 Business Days
New Item
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:398016
Part#: VTT-FLNG-1
Ships in 10 Business Days
$ 393.99 USD
Free Shipping
$ 393.99 USD
Free Shipping

Looking to go big single turbo? Now you can with this Vargas Turbo N54/N55 flange. Designed to give you the ability to go big single, Vargas Turbo has done it again. Available in mild steel or stainless steel, this flange is perfect for anyone who's looking to step apart from the norm and look to make big power.

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:52094551
Part#: VTT-DCS-EWG-ONLY
Ships in 10 Business Days
New Item
$ 839.99 USD
Free Shipping
$ 839.99 USD
Free Shipping
The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Vargas Turbo Technologies - Corporate Logo
T#:1887242
Part#: VTT-B58-GC+TURBO
Ships on Aug 6, 2026
$ 3,269.99 USD
$ 3,269.99 USD
Ready to take your B58 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” “GC-MID” and “GC+” turbocharger upgrade. We start by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. With the basics covered, we stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC’s are a drop in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe
Show More Show Less