Turbos for BMW 2 Series F22 (2014+)

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

Turbocharger Installation Kit - N55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:590423

Part#: TMSTIKN55KT

In Stock

Sale - Save 3% $ 248.08

This product was last offered at the strikethrough price on
06-15-2026

$ 240.64 USD

Add to Wish List

Qty

Sale - Save 3%

$ 248.08

This product was last offered at the strikethrough price on
06-15-2026

$ 240.64 USD

Add to Wish List

Reusing old hardware and gaskets can often lead to oil and exhaust leaks. To prevent this, we have assembled this kit which includes all of the basic components needed to install a turbo upgrade or a re-built turbo on your N55 3.0L.

Show More Show Less

Wastegate Actuator With Hardware - N20 2.0L Engine

10X Entries Into Our F80 M3 Sweepstakes

T#:5416783

Part#: 11657638783TMSKT

In Stock

Sale - Save 13% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD

Add to Wish List

Qty

Sale - Save 13%

$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD

Add to Wish List

Located on the exhaust manifold, includes new mounting hardware. The wastegate actuator releases excess boost pressure. A failed unit may result in a boost leak, reduced performance, and, ultimately, turbocharger failure. If your wastegate actuator has failed, replace it with this OEM part from Turner Motorsport to restore performance and prolong engine life.

Show More Show Less

Turbocharger Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:598822

Part#: 11657625293KT3

Ships in 3 Business Days

Sale - Save 9% $ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 186.46 USD

Add to Wish List

Qty

Sale - Save 9%

$ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 186.46 USD

Add to Wish List

Reusing old hardware and gaskets can often lead to oil and exhaust leaks. To prevent this, we have assembled this kit which includes all of the basic components needed to install a turbo upgrade or a re-built turbo on your N20.

Show More Show Less

Wastegate Actuator With Hardware

10X Entries Into Our F80 M3 Sweepstakes

T#:15677499

Part#: 116586125750KT

In Stock

Sale - Save 13% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD

Add to Wish List

Qty

Sale - Save 13%

$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD

Add to Wish List

The wastegate actuator releases excess boost pressure. A failed unit may result in a boost leak, reduced performance, and, ultimately, turbocharger failure. If your wastegate actuator has failed, replace it with this OEM part from Turner Motorpsort to restore performance and prolong engine life.

Show More Show Less

Forge B58 Charge Pipe Set - All B58

T#:586966

Part#: FMBP3

Ships in 6 Business Days

Sale - Save 10% $ 626.99

This product was last offered at the strikethrough price on
08-29-2026

$ 564.27 USD

Add to Wish List

Qty

Sale - Save 10%

$ 626.99

This product was last offered at the strikethrough price on
08-29-2026

$ 564.27 USD

Add to Wish List

BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.

Show More Show Less

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

T#:587528

Part#: BM-ICP019-T3

Ships on Sep 23, 2026

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.

Show More Show Less

Turbocharger Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:10095934

Part#: 11657934605KT

In Stock

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

New TTE400 N20 Turbocharger Upgrade

Only works with aftermarket inlets

T#:13200606

Part#: N20TTE400

Ships on Sep 18, 2026

Starting at $ 2,164.99 USD

Add to Wish List

Starting at $ 2,164.99 USD

Add to Wish List

To construct a TTE400 N20, the folks at TTE change the original compressor and employ a far larger and more efficient billet 6+6 wheel and mill the compressor cover to the optimum gap to match the new compressor profile. Notice how they CNC mill the cover to have a smooth transition to the intake inlet, no big step to hinder airflow as you see on the competition's offerings. They replace the original exhaust turbine and CNC mill the turbine housing to install a larger 9 blade turbine for greater gas flow and lower backpressure.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 21, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Wastegate Actuator Refresh Kit - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:56363350

Part#: 11747626351KT2

Ships in 1 Business Day

$ 259.99 USD

Add to Wish List

Qty

$ 259.99 USD

Add to Wish List

Built around OEM quality components tested to withstand severe heat cycles, the Turner Motorsport Boost Control Maintenance Kit restores precise wastegate actuation.

New TTE460 N55 Turbocharger Upgrade

T#:13200586

Part#: TTE10072

Ships on Sep 18, 2026

Starting at $ 3,150.00 USD

Add to Wish List

Starting at $ 3,150.00 USD

Add to Wish List

At the core of the TTE460 is a larger TTE compressor wheel, chosen because it is highly efficient and creates an extremely high flow for comparative size. Re-Profiled compressor cover to optimized tolerance to ensure maximum compressor efficiency is given. The original exhaust turbine is retained but modified for greater flow

Show More Show Less

New TTE550 N55 Turbocharger Upgrade

T#:12577550

Part#: TE10074

Ships on Sep 18, 2026

Starting at $ 4,148.99 USD

Add to Wish List

Starting at $ 4,148.99 USD

Add to Wish List

The TTE550 for the N55 motor. Still keeping the original turbocharger the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade so producing extra power. Equally, The Turbo Engineers change the original exhaust turbine for a far larger but very lightweight 9-blade TTE-designed turbine for lower exhaust gas backpressure giving greater performance, yet still giving a good spool response. The Turbo Engineers also fitted a TTE motorsport upgrade bearing system for durability. Equilibrium Precisely balancing the turbochargers is a key critical factor to becoming a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequently, great care is taken with all TTE turbochargers to achieving balance standards. Firstly, parts are balanced at slow speeds up to 2800RPM in multiple planes using a single parts machine, then components are assembled and the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using an in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial-numbered balance test result document. Features Genuine Housings & Components Highly Efficient Next Gen Billet Compressor Geometry Optimised Compressor Cover Machining Clearances Genuine diverter valve Fitment As Original. Plug & Play TTE Billet Larger Compressor Wheel 56mm Inlet TTE High-Flow Bigger Turbine (Unlike others that retains stock turbine) Motorsport Bearing Pack 550 PS Proven Single parts finely balanced then components assembled and core high-speed VSR balanced Supplied with a balance test result document Proven TheTurboEngineers quality Software recalibration is required Made in Germany

Show More Show Less

New TTE580 B58 Turbocharger Upgrade

For vehicles with 6-Port Heads only - Will not fit 2-Port Heads

T#:12577546

Part#: TTE10321

Ships on Sep 21, 2026

$ 4,964.99 USD

Add to Wish List

Qty

$ 4,964.99 USD

Add to Wish List

TTE580 is the very latest hybrid performance upgrade turbocharger based on the Original turbocharger for the BMW B58 inline-six-cylinder turbocharged engine. Superfast spool and response with extra power. We feel this is the best performing 550+hp hybrid. Engineered & Enhanced To construct a TTE580 The Turbo Engineers change the original compressor and employ a far larger and more efficient billet wheel with extended tip technology and mill the compressor cover to the optimum gap to match the new compressor profile. The Turbo Engineers change the Original exhaust turbine for a larger 9-blade high-flow item to lower EGT and raise the power potential but maintain a great boost response profile. Equilibrium Precisely balancing the turbochargers is a key critical factor to becoming a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequently, great care is taken with all TTE turbochargers to achieving balance standards. Firstly, parts are balanced at slow speeds up to 2800RPM in multiple planes using a single parts machine, then components are assembled and the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using an in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial-numbered balance test result document. Product Highlights: Original Genuine turbocharger as the base part Original Genuine actuator Original Genuine diverter valve TTE Billet Milled compressor 7+7 Blade with Extended Tip, 55.5mm Inlet TTE High-Flow 9 blade turbine Plug & Play installation 500+ HP on 98ron and proven at 580hp on 102ron Proven TheTurboEngineers quality Single parts finely balanced then components assembled and core high-speed VSR balanced Supplied with a balance test result document Software recalibration is required Made in Germany

Show More Show Less

Project Cars

SELECT YOUR BMW

Turbos for BMW 2 Series F22 (2014+)

Sub-Categories

MAC Single Turbo Boost Solenoid - N54 N55

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

Turbocharger Installation Kit - N55 3.0L

Wastegate Actuator With Hardware - N20 2.0L Engine

Turbocharger Installation Kit

Wastegate Actuator With Hardware

Forge B58 Charge Pipe Set - All B58

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

Turbocharger Installation Kit

New TTE400 N20 Turbocharger Upgrade

Turbo & Intake Heat Shield - Gen2 B58

Turbo & Intake Heat Shield - Gen1 B58

Wastegate Actuator Refresh Kit - N55

New TTE460 N55 Turbocharger Upgrade

New TTE550 N55 Turbocharger Upgrade

New TTE580 B58 Turbocharger Upgrade

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results