Turbos for BMW 2 Series F22 (2014+)

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with production date from 07/2013

EWG models only

T#:13957900

Part#: N55PURE500EWG

In Stock

$ 1,136.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

The PURE500 turbo from Pure Turbos is sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance, there is no better stage 1 turbo option for your N55!

Show More Show Less

Pure Turbo Heavy Duty N55 Pneumatic Wastegate Actuator - BMW N55 3.0L...

For models with a production date up to 07/2013

T#:17771605

Part#: HDN55WG

In Stock

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

The early N55 turbocharger is notorious for pneumatic wastegate actuator failure, a common issue that triggers frustrating boost errors and persistent check engine lights. Because BMW does not provide this specific component as a standalone replacement, owners are often left with few official repair options. Pure Turbos solves this problem with an upgraded actuator engineered to fix the inherent weaknesses of the original equipment while simultaneously boosting the efficiency of the entire turbocharging system. One of the primary benefits of this enhanced actuator is its ability to deliver approximately 2 psi of additional boost compared to the factory unit while maintaining the same Wastegate Duty Cycle. By optimizing how exhaust gases are managed and bypassed, this component allows the engine to generate more power without requiring more effort from the electronics. This increased pressure translates directly into sharper throttle response and a noticeable jump in horsepower, making it an essential upgrade for drivers who want to restore their vehicle's reliability while enjoying a more aggressive and responsive driving experience.

Show More Show Less

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ PWG

For vehicles with production date up to 07/2013

PWG models only

T#:13957903

Part#: N55PURE500PWG

In Stock

$ 1,136.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

These PURE500 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance, there is no better stage 1 turbo option for your N55!

Show More Show Less

TurboSmart OPR V2 Oil Pressure Regulator

T#:28504207

Part#: TS-0811-0012

In Stock

10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

10% off MSRP

$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

Turbosmart BMW N20 VIWG Wastegate Actuator - 6inHg

T#:35053713

Part#: TS-0604-1067

Back Ordered

10% off MSRP $ 280.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 252.99 USD

Add to Wish List

Qty

10% off MSRP

$ 280.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 252.99 USD

Add to Wish List

Turbosmart BMW N20 VIWG Wastegate Actuator - 6inHg is designed to enhance turbo performance and boost control on BMW N20 engines, delivering improved reliability and responsiveness. This high-quality actuator replaces the factory wastegate actuator, providing better stability and minimizing boost leaks under demanding conditions. Ideal for enthusiasts looking to optimize their BMW’s turbo efficiency, this actuator offers superior control and durability.

Designed specifically for BMW N20 engines
Boost control enhancement for increased performance and responsiveness
6inHg spring for precise pressure control
Robust construction reduces the risk of boost leaks
Manufactured by Turbosmart, a trusted brand in performance turbo components
Compatible with a variety of BMW models, ensuring a perfect fit
Available through Turner Motorsport

With Turbosmart’s high-performance design, the BMW N20 VIWG Wastegate Actuator - 6inHg is a perfect choice for drivers looking to upgrade their turbo system. This wastegate actuator is engineered for those who demand better boost stability, control, and overall performance from their vehicle.

Show More Show Less

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with production date from 07/2013

EWG models only

T#:13957909

Part#: N55PURE750EWG

In Stock

$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!

Show More Show Less

Blue WG38 Gen V Ultra-Gate 38 - 14PSI

T#:22591972

Part#: TS-0551-1011

In Stock

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Show More Show Less

Pure Turbos N55 PURE600 Turbo Upgrade - BMW N55 3.0L w/ PWG

For vehicles with production date up to 07/2013

T#:38385325

Part#: BMW-N55-PURE-600

Ships in 5 Business Days

$ 2,589.00 USD

Add to Wish List

Qty

$ 2,589.00 USD

Add to Wish List

Upgrade your N55's turbocharger to Pure Turbo's PURE600 upgrade to make increased power without sacrificing drivability or reliability.

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ PWG

For vehicles with production date up to 07/2013

PWG models only

T#:13957911

Part#: N55PURE750PWG

Ships in 9 Business Days

$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!

Show More Show Less

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ PWG

For vehicles with production date up to 07/2013

For vehicles with pneumatic waste gate (PWG)

T#:578272

Part#: PURE-N55-0001KT

Ships in 4 Business Days

$ 2,906.99

This product was last offered at the strikethrough price on
07-14-2026

$ 2,800.00 USD

Add to Wish List

Qty

$ 2,800.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $300 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with pneumatic waste gate (PWG)

Show More Show Less

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with production date from 07/2013

For vehicles with electronic waste gate (EWG)

T#:578281

Part#: PURE-N55-0004KT

Ships on Sep 9, 2026

$ 3,114.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,000.00 USD

Add to Wish List

Qty

$ 3,000.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $500 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with electronic waste gate (EWG)

Show More Show Less

Pure Turbos N20 Stage 2 Turbo Upgrade - BMW N20 2.0L w/ EWG

For vehicles with electronic waste gate (EWG)

T#:578233

Part#: PURE-N20-0002KT

Ships in 4 Business Days

$ 2,590.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,495.00 USD

Add to Wish List

Qty

$ 2,495.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight-six produced, but Pure Turbos have been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. With Pure Turbos' Stage 2 upgrade, the BMW N20 two-liter is capable of 400whp or more with just a few additional supporting modifications!

Show More Show Less

Pure Turbos B58 Gen1 PURE600 Turbo Upgrade - F22/23 M240, F3X 340/440...

T#:46684829

Part#: B58G1P600

Ships on Aug 12, 2026

$ 1,343.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

Looking to upgrade your turbo? Pure Turbos now offers their PURE600 B58 Turbo Upgrade kit! Pure Turbo's PURE600 turbo kit is designed to support 550+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW on the street and for occasional track outings.

Show More Show Less

Pure Turbos N55 PURE600 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with production date from 07/2013

T#:46444175

Part#: N55PURE600EWG

Ships in 9 Business Days

$ 2,589.00 USD

Add to Wish List

Qty

$ 2,589.00 USD

Add to Wish List

Upgrade your N55's turbocharger to Pure Turbo's PURE600 upgrade to make increased power without sacrificing drivability or reliability.

Pure Turbos N55 Turbo Installion Kit - N55 3.0L

T#:590383

Part#: PUREN55INSTKIT

Ships in 4 Business Days

$ 233.99 USD

Add to Wish List

Qty

$ 233.99 USD

Add to Wish List

Includes everything you need to install your upgraded turbo from Pure Turbos.

Pure Turbos High Flow Silicone Turbo Inlet - F-Series N55 3.0L ...

T#:20254647

Part#: F-HFSI-N55

In Stock

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

Plastic piping fails over time, dont let this cause poor performance for your N55. Replace your stock plastic piping with this Pure Turbos High Flow Silicone inlet pipe.

TurboSmart WG38 Gen V Ultra-Gate 38 - 14PSI - Black

T#:4921469

Part#: TS-0551-1012

Ships on Aug 6, 2026

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Show More Show Less

Pure Turbos NEW B58 Gen1 PURE800 Turbo Upgrade - F22/23 M240, F3X 340...

T#:8076767

Part#: PUR-TUR-B58-012

Ships in 5 Business Days

$ 3,107.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

Looking to upgrade your turbo? Pure Turbos now offers their PURE800 B58 Turbo Upgrade kit! Pure Turbo's PURE800 turbo kit is designed to support 700+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW both on the street and on the track, without having to spend the high prices needed to break the quadruple-digit power threshold.

Show More Show Less

Pure Turbos B58 Gen1 PURE800 Turbo Upgrade - F22/23 M240, F3X 340/440...

T#:46684824

Part#: B58G1P800KT

Ships in 4 Business Days

$ 3,426.99

This product was last offered at the strikethrough price on
07-14-2026

$ 3,394.00 USD

Add to Wish List

Qty

$ 3,394.00 USD

Add to Wish List

Looking to upgrade your turbo? Pure Turbos now offers their PURE800 B58 Turbo Upgrade kit! Pure Turbo's PURE800 turbo kit is designed to support 700+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW both on the street and on the track, without having to spend the high prices needed to break the quadruple-digit power threshold.

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Aug 6, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Pure Turbos N20 Stage 2 Turbo Upgrade - BMW N20 2.0L w/ PWG

For vehicles with pneumatic waste gate (PWG)

T#:578230

Part#: PURE-N20-0001KT

Ships in 4 Business Days

$ 2,382.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,295.00 USD

Add to Wish List

Qty

$ 2,295.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight-six produced, but Pure Turbos have been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. With Pure Turbos' Stage 2 upgrade, the BMW N20 two-liter is capable of 400whp or more with just a few additional supporting modifications!

Show More Show Less

Pure Turbos B48 Stage 2 Turbo Upgrade - F22/23 F3X G01/G02 G30 B46/B4...

T#:578221

Part#: PURE-B48-0001KT

Ships in 4 Business Days

$ 3,426.99

This product was last offered at the strikethrough price on
07-14-2026

$ 3,300.00 USD

Add to Wish List

Qty

$ 3,300.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. For those in pursuit of the most substantial power upgrades for their 2.0T B46/B48, Pure Turbos has the answer with their Stage 2 turbocharger upgrade. With supporting modifications, this turbocharger is capable of supporting 400+ whp, enough to satisfy most street drivers' ambitions.

Show More Show Less

Pure Turbos B58 Gen1 PURE650 Turbo Upgrade - F22/23 M240, F3X 340/440...

T#:46684830

Part#: B58G1P650

Ships in 4 Business Days

$ 2,588.99

This product was last offered at the strikethrough price on
07-14-2026

$ 2,495.00 USD

Add to Wish List

Qty

$ 2,495.00 USD

Add to Wish List

Looking to upgrade your turbo? Pure Turbos now offers their PURE650 B58 Turbo Upgrade kit! Pure Turbo's PURE650 turbo kit is designed to support 600+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW on the street and for occasional track outings.

Show More Show Less

VRSF High Flow Upgraded Aluminum Intake Inlet Kit N55 F Chassis 13-17...

We Price Match - Give Us A Call or Chat!

T#:5844256

Part#: 10301060

Ships in 1 Business Day

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

These high flow intake inlets are constructed from high quality, tig welded brushed aluminum. This upgraded inlets is the most cost effective solutions for anyone looking to replace their restrictive factory inlet. Unlike other available upgrades, the VRSF features a CNC’d aluminum flange that offers a larger overall inside diameter which not only increases flow but decreases back pressure. Our high flow inlet kit includes everything necessary to replace the restrictive stock intake inlet with our high flowing 2.5″ aluminum inlet. This kit will work with any and all available intakes as well as any upgraded turbo that is compatible with the OEM intake. This kit works with both RHD and LHD models as well as XI their variants.

Show More Show Less

Pure Turbos N20 Pure400 Turbo Upgrade - BMW N20 2.0L (w/ EWG) ...

T#:56038081

Part#: N20P400EWG

Ships in 4 Business Days

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

Stop letting your N20's factory turbo strangle your lap times and choke out your top-end speed. The Pure Turbos Pure400 EWG upgrade is the track-proven weapon your four-cylinder BMW has been begging for. This isn't a simple rebuilt unit, it is a brand-new aftermarket housing packed with performance internals designed to take a beating and keep delivering. Featuring a custom billet compressor wheel, a high-flow turbine wheel for rapid exhaust scavenging, and an upgraded CHRA that is VSR-balanced to perfection, the Pure400 is built for those who push their cars to the limit. It drops right into place, replacing your stock turbocharger, and provides a reliable 300+ wheel horsepower, with supporting modifications.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Aug 6, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Pure Turbos B58 Gen1 PURE900 Turbo Upgrade - F22/23 M240, F3X 340/440...

T#:46684831

Part#: B58G1P900

Ships in 5 Business Days

$ 3,626.99

This product was last offered at the strikethrough price on
07-08-2026

$ 3,626.00 USD

Add to Wish List

Qty

$ 3,626.00 USD

Add to Wish List

Looking to upgrade your turbo? Pure Turbos now offers their PURE900 B58 Turbo Upgrade kit! If you are looking to push your BMW's B58 to its limits, the PURE900 turbo kit is the turbo upgrade for you. Pure Turbo's PURE900 turbo kit is designed to support 800+ wheel horsepower with supporting modifications.

Show More Show Less

Pure Turbos NEW B48 Gen1 Pure400 Turbo Upgrade - BMW F22/23 F3X G01/0...

T#:53326236

Part#: G1B48P400

In Stock

$ 1,136.99 USD

Add to Wish List

Qty

$ 1,136.99 USD

Add to Wish List

The Pure Turbos Pure400 for the BMW B48 is a precision-engineered performance upgrade designed for the first generation of BMW’s modular 2.0L inline-4 engine. This unit is built into a brand-new aftermarket housing that utilizes an OEM-style design, ensuring a seamless plug-and-play installation without the requirement of a core exchange or refundable deposit. The turbocharger features an upgraded Pure Turbos billet compressor wheel and a higher-flowing turbine wheel, which together significantly improve exhaust efficiency and airflow capacity. To maintain long-term reliability under the increased thermal and mechanical stresses of high-boost applications, the Pure400 is equipped with a heavy-duty upgraded bearing housing and undergoes meticulous VSR high-speed balancing. Engineered to support over 350 wheel horsepower, depending on fueling and supporting modifications, this upgrade provides a substantial power increase while maintaining the responsive, low-end torque characteristics of the original B48 engine. It is a direct-fit solution for a wide range of 2014–2019 F-series and G-series models, including the 230i, 330i, and X3 xDrive30i, prior to the Technical Update (TU) changes. While the hardware integrates perfectly with factory connections, custom tuning is mandatory to fully optimize the engine’s performance and ensure safe operation. This kit offers a robust and reliable path for 4-cylinder enthusiasts looking to achieve elite-level performance with a clean, factory-appearing finish.

Show More Show Less

Project Cars

SELECT YOUR BMW

Turbos for BMW 2 Series F22 (2014+)

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results