BMW Fuel System Parts for BMW 2 Series F22 (2014+)

Clear BMW chassis

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

Race German Inline Fuel Pressure Adapter (1/8npt)

T#:7703242

Part#: RGIFPA

Ships in 1 Business Day

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Finding a way to measure your fuel pressure is not always the easiest thing to do. Race German wanted to make your life just a little easier with this in-line fuel pressure adapter. This simple solution allows you to splice into your rubber fuel feed line hose and attach a 1/8NPT pressure sender. This would be great to run a fuel pressure gauge, or give you a way to temporarily test your pressure for troubleshooting issues, either way you can't go wrong. *Does not include pressure sender.

Show More Show Less

BMW GEN2 Upgraded High Pressure Pump B58

T#:31291063

Part#: SP-B58-FX350-NEY

Special Order: No Guaranteed ETA

$ 2,348.00 USD

Add to Wish List

Qty

$ 2,348.00 USD

Add to Wish List

The FX-350 is truly Plug and Play for all platforms we are offering and comes with all the lines and hardware needed for a clean easy install.

SPOOL FX-200 Upgraded High Pressure Fuel Pump - BMW N55

T#:26271786

Part#: SP-FX-200-N55-NE

In Stock

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The FX-200 is an advanced high-pressure fuel pump engineered specifically for the BMW N55 engine, replacing our previous FX180 model. Featuring a larger bore size than the stock pump, it provides nearly double the flow rate. This pump is fully E85 fuel compatible and integrates seamlessly into the system without requiring any wire cutting or splicing. The enhanced flow capacity enables the use of higher ethanol concentrations and supports sufficient fueling for larger turbochargers.

Show More Show Less

PFS Port Injection Kit - B58

2X Entries Into Our F80 M3 Sweepstakes
Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

B58 Stage 3 Low Pressure Fuel Pump - New Bucket Build

T#:20320741

Part#: SP-BMB58-FP

Special Order: No Guaranteed ETA

$ 1,148.99 USD

Add to Wish List

Qty

$ 1,148.99 USD

Add to Wish List

Spool FX-200 Upgraded High Pressure Pump + Fuel Line [B58]

T#:15976515

Part#: SP-FX-180-B58

Special Order: No Guaranteed ETA

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

NOTE: This kit includes the optional Stainless Steel High Pressure Fuel Line offered by Spool The FX-180 is an upgraded high-pressure fuel pump for the BMW B58 motor. The pump features a bigger bore size than stock that translates into roughly 80% more flow when compared to stock. The pump is completely E85 compatible and fully plug and play with no cutting or splicing of any kind required. The added flow will let you run much higher ethanol concentrations and also allow fueling for bigger turbos. Flow Rates based on B58 stock CAM lift: Stock B58 Pump - 0.954 cc per rev FX-180 - 1.7 cc per rev Why do you need it? The stock HPFP on B58 motor is severely limited in capacity when trying to tune and raise the output of the motor. The FX-180 adds 80% more flow to the equation, raising the fueling limits on the platform and helping you run bigger turbos and/or higher ethanol concentration blends. Are tune changes required? The upgraded pump does require calibration changes. It is important to apply these changes prior to starting the car with pump installed to avoid any possible damage and void of warranty. Spool Performance can provide calibration details to your existing tuner and/or help you connect with established tuners who are experienced with these pumps. Custom tuning is required to get maximum output out of the upgraded pump setup for your specific vehicle setup and ambient conditions. Spool Performance is a hardware manufacturer and does not provide custom tunes, but can assist with questions your tuner may have. Low Pressure Fuel Pump Upgrade: Proper low pressure fueling is extremely important for proper functioning and durability of the high pressure pumps and injectors in a DI system. Inadequate low pressure fueling can cause damage to the pump piston and bore as they are lubricated by controlled leakage of fuel. Resulting damage from low pressure starvation is detectable and would be cause for voided warranties. Please make sure you plan out your fuel system build with proper low pressure upgrades when necessary. NOTE: NOT COMPATIBLE WITH B58TU ENGINE

Show More Show Less

Spool FX-200 BMW N20 N26 Upgraded High Pressure Pump

T#:37385971

Part#: SP-FX-200-N20-NE

Special Order: No Guaranteed ETA

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

Upgraded Low Pressure Fuel Pump Assembly

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:14188788

Part#: R420-0002

Ships in 5 Business Days

11% off MSRP $ 1,631.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,449.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,631.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,449.99 USD

Add to Wish List

As power output increases, the demand for low-pressure fuel pumps increases. This kit includes components to upgrade your low-pressure fuel pump to deliver consistent fuel flow regardless of the amount of fuel inside the tank while increasing tank drawing. Best of all, the modified pump can be properly controlled by the DME and will result in no fault codes. Complete modified fuel pump Increases tank draw Consistent fuel flow Works seamlessly with existing DME For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four-year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW 2 Series F22 (2014+)

Sub-Categories

Race German Inline Fuel Pressure Adapter (1/8npt)

BMW GEN2 Upgraded High Pressure Pump B58

SPOOL FX-200 Upgraded High Pressure Fuel Pump - BMW N55

PFS Port Injection Kit - B58

B58 Stage 3 Low Pressure Fuel Pump - New Bucket Build

Spool FX-200 Upgraded High Pressure Pump + Fuel Line [B58]

Spool FX-200 BMW N20 N26 Upgraded High Pressure Pump

Upgraded Low Pressure Fuel Pump Assembly

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results