BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 2 Series F22 (2014+)

The Akrapovic Evolution exhaust systems for the BMW F22/23 M240i are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes.

This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW M240i in numerous areas. The first visible improvement is the additional power of 6.5 HP (at 5500 rpm) and 12.6 Nm (at 3000 rpm). The range between 2.000 rpm and 3.500 rpm  was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the M240i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.

Fitment:
2017+ F22/23 BMW M240i

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

• 2" wide x 1/16" thick
• Durable, tightly woven, 100% fiberglass
• Reduce under hood temperatures
• Protect other engine components
• Protect your hands/arms from burns
• Each roll comes with 5 FREE, 14" long stainless steel zip ties

The Dinan center pipe replaces the resonator in the M235i exhaust. By deleting resonators you can gain a little more volume from the exhaust. This is especially good if you're a fan of the stock exhaust sound and just want to hear more of it. And with less restriction there is a slight horsepower and torque gain as well! This pipe fits best with the Dinan Free Flow rear muffler but will fit on the stock exhaust too.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The resonator-delete pipe is worth 1 point towards your Dinan badge.

This item fits the following BMWs:
2014+ F22 F23 BMW M235i M235iX

Dinan engineers designed the F22 M240i exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Not only is the tone improved but the additional burbles and pops that come with it are simply intoxicating. Dinan also incorporates a Helmholtz chamber design that reduces resonance or “drone” at low RPM.

The system is built to exacting specifications to ensure perfect fit using the factory hangers. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 89mm (3.5") polished exhaust tips for a tasteful, high-performance look.

Maximum performance gains are 6 horsepower and 5 ft-lbs of torque.

Benefits of the Dinan Free Flow Exhaust for the F22 M240i:

+ Uses the factory brackets and hangers for a factory-like fitment.
+ Helmholtz chamber to reduce drone.
+ Enjoyably louder, sportier Sound
+ 100% 304 stainless steel construction
+ Twin 89mm (3.5") laser engraved ceramic black exhaust tips
+ 6 HP @ 6600 RPM, 5 FT-LB
+ Factory computer controlled exhaust valve is eliminated

Dinan engineers designed the F22 M240i exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Not only is the tone improved but the additional burbles and pops that come with it are simply intoxicating. Dinan also incorporates a Helmholtz chamber design that reduces resonance or “drone” at low RPM.

The system is built to exacting specifications to ensure perfect fit using the factory hangers. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 89mm (3.5") polished exhaust tips for a tasteful, high-performance look.

Maximum performance gains are 6 horsepower and 5 ft-lbs of torque.

Benefits of the Dinan Free Flow Exhaust for the F22 M240i:

+ Uses the factory brackets and hangers for a factory-like fitment.
+ Helmholtz chamber to reduce drone.
+ Enjoyably louder, sportier Sound
+ 100% 304 stainless steel construction
+ Twin 89mm (3.5") laser engraved polished exhaust tips
+ 6 HP @ 6600 RPM, 5 FT-LB
+ Factory computer controlled exhaust valve is eliminated

This exhaust gasket is used to seal the exhaust midpipes to the downpipes. We also recommend replacing the bolts (11621711954, 4 required) as well.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
N54 3.0L

This exhaust gasket is used to seal the turbo to downpipe connections.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
N54,N54T,N55,N63,N63N,S55,S63 and S63N engines

BMW F22 F23 Dinan High Flow Mid-pipe is designed to significantly enhance the exhaust tone and performance of your BMW. This premium mid-pipe replaces the factory center section, including both resonators, with straight-through 3.25" T304 stainless steel tubing. The result is improved exhaust flow, a more aggressive sound, and a weight reduction of 3 pounds. When paired with the Dinan exhaust, the sound is perfected into an unmistakable growl, making your BMW F22 or F23 stand out on the road.

• Enhanced exhaust tone: Delivers an aggressive, sporty sound that turns heads.
• Improved exhaust flow: Increases performance by replacing restrictive factory components with 3.25" T304 stainless steel tubing.
• Weight reduction: Reduces overall vehicle weight by 3 pounds for better performance.
• High-quality construction: Crafted from durable T304 stainless steel for long-lasting performance and corrosion resistance.
• Perfect pairing: Complements the Dinan exhaust system, amplifying the sound and performance benefits.
• Designed for BMW F22 and F23: Ensures a perfect fit and easy installation.

Upgrade your BMW with the Dinan High Flow Mid-pipe, available through Turner Motorsport, to experience a new level of performance and sound.