Fuel Pump for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

BMW fuel pumps run at a very high pressure in order to properly supply the injectors with fuel. A failed pump will allow the car to crank, but wont kick over. Turner Motorsports carries Genuine BMW pumps that will have you back on the road in no time.
Sort By:

Spool Performance - Corporate Logo
T#:31291063
Part#: SP-B58-FX350-NEY
Special Order: No Guaranteed ETA
$ 2,348.00 USD
Free Shipping on orders $49 and up
The FX-350 is truly Plug and Play for all platforms we are offering and comes with all the lines and hardware needed for a clean easy install.
Spool Performance - Corporate Logo
T#:640940
Part#: SP-BMB58-FP-DY
Special Order: No Guaranteed ETA
$ 499.00 USD
Free Shipping
$ 499.00 USD
Free Shipping
LPFP upgrade kit for your B58 engine - Save by assembling on your own!
Spool Performance - Corporate Logo
T#:640951
Part#: SP-BMFXXN-FP
Special Order: No Guaranteed ETA
$ 749.00 USD
Free Shipping
$ 749.00 USD
Free Shipping
Stage 3 LPFP upgrade kit for your N55 engine

Spool Performance - Corporate Logo
T#:26271786
Part#: SP-FX-200-N55-NE
In Stock
$ 1,799.00 USD
Free Shipping on orders $49 and up
The FX-200 is an advanced high-pressure fuel pump engineered specifically for the BMW N55 engine, replacing our previous FX180 model. Featuring a larger bore size than the stock pump, it provides nearly double the flow rate. This pump is fully E85 fuel compatible and integrates seamlessly into the system without requiring any wire cutting or splicing. The enhanced flow capacity enables the use of higher ethanol concentrations and supports sufficient fueling for larger turbochargers.
Show More Show Less

Dorch Engineering DS15 HPFP Upgrade - N55
For Vehicles Produced Before 12/2013
Dorch Engineering - Corporate Logo
T#:55533476
Part#: DE-55-15B
In Stock
New Item
$ 1,149.00 USD
Free Shipping on orders $49 and up
$ 1,149.00 USD
Free Shipping on orders $49 and up
The Dorch DS15B High-Pressure Fuel Pump Upgrade is the definitive choice for drivers demanding uncompromised fuel delivery under heavy load. The stock pump simply cannot keep up with the volume required for upgraded turbos
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55461363
Part#: DE-581-25A
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533509
Part#: DE-581-30A
In Stock
New Item
$ 2,399.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55569519
Part#: DE-LK-1038-EWGKT
Ships in 5 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering Lift Kit HPFP Upgrade is engineered to completely eradicate direct-injection fueling limitations, providing up to 38% more flow volume on top of your existing Dorch fuel pump setup.
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55569521
Part#: DE-LK-1049-EWGKT
Ships in 5 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
Engineered specifically for high power builds that push the direct injection threshold, this lift kit overrides the typical N55 fueling bottleneck by overdriving the high pressure fuel pump mechanism.

Dorch Engineering - Corporate Logo
T#:55569525
Part#: DE-LK-1049-PWGKT
Ships in 5 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering N55 PWG Lift Kit is the upgrade your BMW needs. By optimizing the fuel pump lift profile, this kit allows your HPFP to pump significantly more fuel per revolution. Designed specifically for the early Pneumatic Wastegate (PWG) N55 engines
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533499
Part#: DE-55-25A
Ships in 5 Business Days
New Item
$ 1,699.00 USD
Free Shipping on orders $49 and up
$ 1,699.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55569526
Part#: DE-LK-1038-PWGKT
Ships in 5 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The factory N55 fueling system leaves a lot to be desired once you turn up the boost. Enter the Dorch Engineering HPFP Lift Kit. This kit is a calculated, high performance solution designed specifically for PWG N55 engines to extract maximum flow from your fueling setup by altering the mechanical lift profile of the pump drive
Show More Show Less


Dorch Engineering DS15 HPFP Upgrade - N55
For 2013+ models with OE Bosch HPFP
Dorch Engineering - Corporate Logo
T#:55461367
Part#: DE-55-15A
Ships in 1-2 days
New Item
$ 1,149.00 USD
Free Shipping on orders $49 and up
$ 1,149.00 USD
Free Shipping on orders $49 and up
Eliminate the fueling limits and maintain factory-level reliability with the Dorch Engineering DS15 HPFP Upgrade. This "Stage 1.5" pump replaces the successful DS1, engineered specifically to handle the flow demands of aggressive tuning
Show More Show Less
Spool Performance - Corporate Logo
T#:20320741
Part#: SP-BMB58-FP
Special Order: No Guaranteed ETA
$ 1,148.99 USD
Free Shipping on orders $49 and up
Spool Performance - Corporate Logo
T#:640931
Part#: SP-FX-150-B58
Special Order: No Guaranteed ETA
$ 1,399.00 USD
Free Shipping
$ 1,399.00 USD
Free Shipping

B58 High-Pressure Fuel-pump | Spool Performance delivers exceptional performance for BMW enthusiasts seeking to upgrade their vehicle’s fuel system. Designed by the innovative engineers at Spool Performance, this high-pressure fuel pump significantly enhances fuel flow and power, making it an ideal choice for those looking to push the limits of their BMW's performance.

  • Increased Flow Rate: Provides 50% more flow compared to stock pumps (Stock @ .954 cc per rev vs. FX-150 @ 1.43 cc per rev).
  • Enhanced Fuel Limits: Supports larger turbos and higher ethanol concentration blends for increased performance.
  • Easy Installation: Plug-and-play design for straightforward installation.
  • E85 Compatibility: Suitable for use with E85 fuel blends.
  • Lifetime Warranty: Backed by a lifetime warranty from Spool Performance.

Important Note: The upgraded pump requires calibration changes before installation to prevent damage and warranty voidance. Ensure these changes are applied prior to starting the vehicle with the new pump installed.

Show More Show Less

Spool Performance - Corporate Logo
T#:15976515
Part#: SP-FX-180-B58
Special Order: No Guaranteed ETA
$ 1,899.00 USD
Free Shipping on orders $49 and up
NOTE: This kit includes the optional Stainless Steel High Pressure Fuel Line offered by Spool The FX-180 is an upgraded high-pressure fuel pump for the BMW B58 motor. The pump features a bigger bore size than stock that translates into roughly 80% more flow when compared to stock. The pump is completely E85 compatible and fully plug and play with no cutting or splicing of any kind required. The added flow will let you run much higher ethanol concentrations and also allow fueling for bigger turbos. Flow Rates based on B58 stock CAM lift: Stock B58 Pump - 0.954 cc per rev FX-180 - 1.7 cc per rev Why do you need it? The stock HPFP on B58 motor is severely limited in capacity when trying to tune and raise the output of the motor. The FX-180 adds 80% more flow to the equation, raising the fueling limits on the platform and helping you run bigger turbos and/or higher ethanol concentration blends. Are tune changes required? The upgraded pump does require calibration changes. It is important to apply these changes prior to starting the car with pump installed to avoid any possible damage and void of warranty. Spool Performance can provide calibration details to your existing tuner and/or help you connect with established tuners who are experienced with these pumps. Custom tuning is required to get maximum output out of the upgraded pump setup for your specific vehicle setup and ambient conditions. Spool Performance is a hardware manufacturer and does not provide custom tunes, but can assist with questions your tuner may have. Low Pressure Fuel Pump Upgrade: Proper low pressure fueling is extremely important for proper functioning and durability of the high pressure pumps and injectors in a DI system. Inadequate low pressure fueling can cause damage to the pump piston and bore as they are lubricated by controlled leakage of fuel. Resulting damage from low pressure starvation is detectable and would be cause for voided warranties. Please make sure you plan out your fuel system build with proper low pressure upgrades when necessary. NOTE: NOT COMPATIBLE WITH B58TU ENGINE
Show More Show Less

Spool Performance - Corporate Logo
T#:37385971
Part#: SP-FX-200-N20-NE
Special Order: No Guaranteed ETA
$ 1,799.00 USD
Free Shipping on orders $49 and up