Please ensure your correct model is selected
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.
Used for Pro 5 R filters
GFB’s DV+ solution couldn’t be simpler - keep what works and replace what doesn’t.
Worldwide Patent and Design Patent Pending
GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.
The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?), but the weak point however is the valve mechanism itself. So GFB’s DV+ solves this problem by replacing just the valve parts with an anodised billet aluminium housing fitted with a brass piston machined to exacting tolerances.
The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story on the next page.
Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus either a different solenoid valve to actuate the pneumatic valve or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install.
GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds.
Many late-model European cars use ECU controlled solenoid-type diverter valves. This is a good concept because the valve can react very quickly and it only opens when it needs to.
However, there are some problems with these valves. There are typically two types of solenoid-actuated diverter valves found standard on VAG and European cars, both of which have their shortcomings.
Common OE Problem #1
The diaphragm types are commonly known to rupture, especially when boost and temperature are increased as a result of chip tuning.
Common OE Problem #2
The plastic piston-type leaks far more than most people realise (by design, not from wear), and doesn’t always close after a high-boost gear shift.
Additionally, in both cases, the solenoid on the OE diverter is directly connected to the valve mechanism, which is not ideal because neither it nor the return spring are strong enough to open and close the valve reliably at high boost.
With problems like this, you can see why other aftermarket manufacturers assume the best solution is to replace the factory diverter entirely. Unfortunately though, whilst their replacement kits might be stronger than the factory diverter, their slower response speed and lower flow do not justify the extra cost and complexity - more of a compromise than a solution.
GFB has taken a different approach to deliver a complete solution that solves existing problems and improves performance, without compromise or a hefty price tag.
The DV+ addresses the factory valve problems with a very simple and elegant solution. Keeping the factory solenoid retains all the benefits of the stock system, and replacing the valve parts with indestructable metal components ensures strength and reliability no matter how much boost you run.
That's not all. Rather than using the solenoid to directly actuate the valve, we’ve introduced a unique “pilot-actuation” system. This means the solenoid controls the air pressure that is used to open and close the piston, so it doesn't matter how much boost you push through it, the DV+ will open and close reliably without ever exceeding the solenoid’s capability.
This feature also improves on the factory system by opening the valve progressively in response to boost pressure, so it only opens as much as required to get the job done (the factory valve simply opens and shuts, it cannot partially open if boost pressure is low), resulting in better throttle response.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The Manifold Absolute Pressure sensor provides pressure information to the engine control unit to calculate air density for determining the engine’s air mass flow rate. A faulty MAP sensor can upset the fuel mixture and ignition timing, causing a surge, rough idle, and a rich fuel condition which can lead to spark plug fouling and a loss of power and fuel economy.
Features:
Guaranteed fitment Replaces failed pressure sensor to restore proper airflow measurement Helps correct air/fuel mixture for optimal fuel economy Easy plug-and-play wiring connection
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Ensure optimal performance in your BMW with the Turner Motorsport Genuine Vacuum Control Valve, part number 11747810831. This solenoid-operated vacuum control switch is a crucial component used in various applications throughout your vehicle. Designed to meet the high standards of Genuine BMW parts, this valve ensures reliable operation and compatibility with your BMW model.
This product was last offered at the strikethrough price on
03-17-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Universal High-Flow Air Filter
Give your engine the airflow it deserves with this reusable, high-performance air filter—perfect as a direct replacement for an ECS intake system or as the finishing touch for your custom intake project.
Dimensions: 4.5" Base OD • 6" Filter Height • 3.5" Top OD
Upgrade from your restrictive factory filter to an ECS Tuning High-Flow Dry Air Filter and let your engine breathe freely. Improved intake flow enhances power throughout the rev range while helping maintain efficient fuel economy.
Oiled vs. Dry Filters — Which Is Right for You?
Oiled Filters
Offer slightly higher airflow for maximum performance
Require more frequent cleaning
Must be re-oiled after each cleaning
Long-term reusable design saves money over disposable paper filters
Dry Filters
Provide excellent airflow with minimal maintenance
Easily cleaned with warm, soapy water—no oiling required
Still flow significantly better than OE paper filters
Fully reusable and cost-effective
Both versions deliver superior performance over stock filters while offering the long-term benefit of reusability. Choose the option that best fits your maintenance style and performance goals.
This product was last offered at the strikethrough price on
06-03-2026
K&N Aerosol Air Filter Cleaning Kit provides a simple and effective solution to preserve and maintain your K&N air filter, ensuring it delivers optimal performance for a lifetime. This cleaning kit is specifically designed to clean and restore the airflow efficiency of your reusable air filter, saving you money by eliminating the need to purchase replacement filters.
The K&N Aerosol Air Filter Cleaning Kit includes a powerful degreaser that effectively removes dirt, grime, and contaminants from your air filter. Once cleaned, the kit’s specialized oil is used to recoat the filter, ensuring it continues to trap harmful particles while allowing maximum airflow.
Regular maintenance with this kit not only extends the life of your air filter but also enhances your engine’s performance by maintaining high air flow and exceptional filtration. Easy to use, the K&N Aerosol Air Filter Cleaning Kit is an essential tool for keeping your air filter in top condition.
This product was last offered at the strikethrough price on
05-02-2026
This product was last offered at the strikethrough price on
05-02-2026
Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Bring out the sound of your turbo with the ECS Atmospheric Diverter Valve Spacer! The ECS DV Spacer gives your N20 the sound of a blow off valve (BOV) with every gear change and every boosted throttle close! The strategically engineered vent slots allow you to boost on without a CEL (Check Engine Light).
FEATURES:
Anodized Black 6061-T6 aluminum
Features 3 radial slots to let out the “woosh” with optimal flow for all OEM DV types
Engineered to operate CEL-FREE!
Alignment holes for ease of installation
Includes pre-installed, captured Viton O-rings, resistant to chemical degradation
Includes Zinc-plated alloy steel socket head cap screws
Tested for performance and durability
INSTALLATION:
Remove Diverter Valve
Place the spacer onto the DV flange r
Re-install your original DV solenoid atop the spacer with the included longer hardware.
The wastegate actuator must be swung out of the way for install. Loosen both screws retaining the wastegate actuator, then remove the one closest to the actuator, allowing the actuator to swing out of the way. This will allow for ease of installation.
This product was last offered at the strikethrough price on
05-02-2026
This product was last offered at the strikethrough price on
05-02-2026
Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.
Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The Turbosmart BOV Kompact EM Dual Port - BMW N20/N26 (VR23) offers an advanced blow-off valve solution designed specifically for BMW’s N20 and N26 engines. Engineered with premium materials, this bolt-on unit provides an ideal balance of performance and durability. By improving turbo response and boosting control, it maximizes power efficiency and prevents compressor surge, enhancing the life of your turbocharger system. Turner Motorsport offers this product as a direct replacement with easy installation and seamless compatibility for BMW enthusiasts looking to optimize performance.
Upgrade your BMW’s turbo system with the Turbosmart BOV Kompact EM Dual Port, the trusted solution for performance enthusiasts.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This intake tube, also known as an inlet, is a common culprit for vacuum leaks. It supplies air to the turbocharger and is typically made of plastic. However, due to frequent exposure to heat, it is prone to developing cracks or tears.
The N20 airbox includes a built-in MAF sensor. If this tube tears, it can lead to a post-MAF leak and cause your engine to run lean. This is a serious issue that requires prompt replacement to avoid potential damage to your engine.
For a reliable and affordable replacement, consider Febi's high-quality air intake tube. It's a durable solution that ensures a long-lasting repair.
This product was last offered at the strikethrough price on
05-02-2026
This product was last offered at the strikethrough price on
05-02-2026
Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
03-11-2026
This product was last offered at the strikethrough price on
05-07-2026
It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.
Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.
This product was last offered at the strikethrough price on
05-07-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
