BMW 3 Series F30 (2012+)

• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i 
2012+ F30 335i
2014+ F32 / F33 / F36 435i
 

The Active Autowerke BMW F30 328I signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F30 328I performance signature exhaust.

This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).

This BMW F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!

This muffler turns your 328I exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.

The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 328I performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.

On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 328I test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.

Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.

FEATURES:

• Larger diameter mandrel bent piping for maximum flow
• Durable, polished 100% 304 stainless steel
• Double-walled 80 mm signature stainless tips
• Adjustable tips with embossed Active Autowerke logo on the dual tip model
• Improved power & torque throughout entire RPM band
• Actual dyno measure results with gains of 10 + WHP over stock configuration
• Weighs 19 lbs. vs. the factory of 29 lbs.
• Fitment for coupe, convertible and sedans
• Complete illustrated instruction manual
• Two year limited warranty included

NOTE:

• Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting measurements are included in the instructions.

Fits F30 BMW 228i and 328i models with the N20 engine.

The Akrapovic Evolution exhaust systems for the BMW F30 335i & F32 435 are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes.

This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW 335i in numerous areas. The first visible improvement is the additional power of 7.1 HP (at 5.850 rpm) and 10.7 Nm (at 3500 rpm). The range between 2.000 rpm and 3.000 rpm and at 3.500 rpm was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the 335i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.

Because of size and dimensions of this exhaust, it can not be shipped via conventional carriers such as UPS or FedEx, and must be shipped via Truck Frieght shipping. Not for sale outside the US or Canada.

This Akrapovic Exhaust fits the following BMWs:
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F36 BMW 435i Gran Coupe

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

• Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
• Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
• Easy Installation: Simple to install and compatible with most standard valve stems.
• Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
• Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.