Showing 14608 results for ""

We are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.

Our kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!

Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.

Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

• Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical
• 4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! 
• Fully reversible/removable and back to stock without a trace in minutes
• Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat
• All connecting points sealed with fuel safe Viton o-rings
• Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support
• CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
• Power/CANBus 4-wire plug and play harness
  • 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
  • 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
• Continental Flex Fuel sensor 3-wire harness
• Custom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board
• Custom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required.
• -6 AN fitting by Racetronix

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.

BMW Cold Air Intake System delivers more cool air to your BMW's engine, enhancing performance and producing an aggressive yet refined turbo whistle. Designed for significant performance improvements and ease of use, this intake system offers a range of benefits.

• Dyno-Proven Gains: Increases power by up to +7 HP and torque by +14 Lbs. x Ft.
• Improved Airflow: Outflows the factory intake by 34% for better engine breathing.
• High-Performance Flow: Measures 605 CFM @ 7" H2O for efficient air delivery.
• Open-Element Design: Allows visibility of the large air filter while sealing when the hood is closed to prevent hot air ingress.
• Convenient Filter: Features a washable and reusable Pro DRY S air filter for easy maintenance.
• Easy Installation: Innovative filter-to-housing interface and minimal hardware ensure a quick and straightforward setup.

HP Gain: +15hp
Trq Gain: +28ft-lbs
Airflow: +53% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The Diesel 328d benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in 328d intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.