Oiling System for BMW 3 Series F30 (2012+)

Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3.0L ...

T#:27905122

Part#: 11428583895TKT

Ships in 3 Business Days

$ 540.99 USD

Add to Wish List

Qty

$ 540.99 USD

Add to Wish List

BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Bremmen Engine Oil Filter Housing - Includes a new cap, seals, oil cooler, and oil filter Genuine BMW Oil Cooler Mounting Hardware Genuine BMW Oil Drain Plug Gasket Elring Intake Manifold Gaskets Elring Throttle Body Gasket Bav Auto Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.

Show More Show Less

Genuine BMW Oil Filter Housing Gasket Set - F30/31 F25 N47 2.0L, F02 ...

T#:190628

Part#: 11428580680

Ships in 1-2 days

14% off MSRP $ 56.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Qty

14% off MSRP

$ 56.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

If your oil filter housing is leaking oil, it is probably the gasket. Replace the faulty gasket with this Genuine BMW gasket to ensure your oil filter housing stays well sealed.

Genuine BMW Engine Oil Pump Chain

T#:14122760

Part#: 11418482270

Ships in 4 Business Days

13% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

13% off MSRP

$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Engine Oil Cooler Thermostat W/ Housing - BMW N47 N57 ...

T#:194216

Part#: 11428507694

Ships in 1-2 days

8% off MSRP $ 198.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 182.99 USD

Add to Wish List

Qty

8% off MSRP

$ 198.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 182.99 USD

Add to Wish List

If your engine oil cooler thermostat has failed or the housing has split or cracked, this Genuine BMW replacement thermostat and housing is a great option to get your BMW back on the road.

Oil Pickup Tube - F22, F23, F25, F26, F30, F32, F33, F34, F36 ...

T#:35063

Part#: 11417590735

Ships in 1-2 days

2% off MSRP $ 147.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD

Add to Wish List

Qty

2% off MSRP

$ 147.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 144.99 USD

Add to Wish List

Genuine BMW Suction Pipe -
This item fits the following BMW Chassis:
F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Genuine BMW Oil Pan Gasket & Installation Kit - BMW F22/23 F30/31/32/...

T#:8045895

Part#: 11138580126KT

Ships in 1-2 days

$ 172.99

This product was last offered at the strikethrough price on
07-06-2026

$ 171.99 USD

Add to Wish List

Qty

$ 171.99 USD

Add to Wish List

If you are replacing your oil pan or servicing your pan due to an oil leak, this kit includes all of the basic components you will need, including: Loctite 5970 Sealant Oil Level Sensor Gasket O-ring New Genuine BMW Oil Pan Hardware New Drain Plug & Gasket Ring We also recommend pairing this kit with one of our complete oil change kits to ensure you have everything necessary to replace your oil pan in an afternoon!

Show More Show Less

OIL FILTER

T#:545294

Part#: 11428596283

Ships in 1-2 days

5% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD

Add to Wish List

Qty

5% off MSRP

$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD

Add to Wish List

Oil Pickup Tube

For 328i RWD vehicles with the N20 engine only - N26 RWD models require BMW # 11417589016

T#:199542

Part#: 11417603574

Ships in 1-2 days

Sale - Save 5% $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 55.99

This product was last offered at the strikethrough price on
06-25-2026

$ 52.94 USD

Add to Wish List

Genuine BMW Suction Pipe -
This item fits the following BMW Chassis:
F10,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW Oil Filter Heat Exchanger

T#:571507

Part#: 11428585624

Ships in 1-2 days

6% off MSRP $ 266.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 250.99 USD

Add to Wish List

Qty

6% off MSRP

$ 266.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 250.99 USD

Add to Wish List

Failing heat exchangers can cause unsafe gases to enter your vehicles and other serious issues. Replace these before these issues occur!

Genuine BMW Oil Cooler - Multiple BMWs

T#:20648

Part#: 11427525333

Ships in 1-2 days

6% off MSRP $ 253.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 238.99 USD

Add to Wish List

Qty

6% off MSRP

$ 253.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 238.99 USD

Add to Wish List

Genuine BMW Heat Exchanger -
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

Feed Line - F22, F23, F30, F32, F33, F36

T#:215839

Part#: 11537649300

Ships in 1-2 days

4% off MSRP $ 244.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 233.99 USD

Add to Wish List

Qty

4% off MSRP

$ 244.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 233.99 USD

Add to Wish List

Genuine BMW Feed Line -

This item fits the following BMW Chassis:
F30,F33,F36,

This item fits the following BMW Engines:
N55,

Genuine BMW Engine Oil Pump Assembly - BMW Gen1 B46/B48

T#:522803

Part#: 11417624135

Ships in 1-2 days

6% off MSRP $ 538.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 507.99 USD

Add to Wish List

Qty

6% off MSRP

$ 538.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 507.99 USD

Add to Wish List

Located at the bottom of the engine, the oil pump feeds pressurized oil through the engine to ensure parts like bearings are well lubricated. A failed oil pump will result in low or no oil pressure which leads to failed bearings, which requires a whole engine rebuild to repair. Replace your oil pump as soon as issues arise to prevent potential bearing or complete engine failure.

Show More Show Less

Oil Pan - F22, F23, F25, F26, F30, F31, F32, F33, F34, F36

T#:174234

Part#: 11137601942

Ships in 1-2 days

5% off MSRP $ 884.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 844.99 USD

Add to Wish List

Qty

5% off MSRP

$ 884.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 844.99 USD

Add to Wish List

Genuine BMW Oil Pan -
This item fits the following BMW Chassis:
F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

S55 Oil Pan & Pump Kit - N55 Upgrade

T#:20023486

Part#: 11137854463KT

Ships in 4 Business Days

$ 3,524.99 USD

Add to Wish List

Qty

$ 3,524.99 USD

Add to Wish List

One major drawback of the N55 engine is the oil pump and pan design. While great for street driven vehicles, this design falls short when tracking your BMW. Due to the design of the N55 oil pan and pump, higher G-loads experienced when cornering can lead to oil starvation and pressure drop, potentially leading to bearing damage and more. By upgrading to the S55 oil pan and pump design that BMW utilizes in both their standard M4 and Motorsport M4 GT4 models, you can prevent the possibility of oil starvation! The dual pump design used on the S55 engine installs onto the N55 engine easily and without the need for any major modification to the stock block or windage tray. Thanks to the addition of a scavenging pump, oil pressure and delivery are maintained under all aggressive driving conditions, even when the oil supply is not consistent from the main oil pump.

Show More Show Less

Oil Filter Kit - N20 Engine - E89 Z4, F10 528i, F30 328i

T#:19147

Part#: 11427634291

Ships in 4 Business Days

13% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD

Add to Wish List

Qty

13% off MSRP

$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD

Add to Wish List

This is an oil filter service kit for the BMW N20 four-cylinder with the black plastic oil filter housing (not aluminum housing). This is the OEM oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and plastic plug.

N20 application note: BMW used different oil filter housings for RWD and AWD models. This filter kit fits RWD models only .

This item fits the following BMWs:
2012+ F30 BMW 320i 328i - Sedan
2011+ F10 BMW 528i
2009+ Z4 BMW Z4 sDrive28i

Show More Show Less

Hydraulic Line Bracket - Left - F22, F30, F32, F87

T#:179878

Part#: 17217628760

Ships in 4 Business Days

4% off MSRP $ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD

Add to Wish List

Qty

4% off MSRP

$ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD

Add to Wish List

Genuine BMW Bracket For Heat Exchanger/Coolant Pump -
This item fits the following BMW Chassis:
F22,F30,F32

Fits BMW Engines including:
N55

Baum Tools N20 Balance Shaft Adjuster - BMW N20 N26 2.0L

T#:7244403

Part#: B2212825K

Ships in 5 Business Days

$ 152.97 USD

Add to Wish List

Qty

$ 152.97 USD

Add to Wish List

Designed to hold the balance shaft in position when removing/installing the oil pump, chain, and sprocket on BMW N20/N26 4-cylinder engines. Comparible to BMW factory tool #83302318117 & 83302212825

Show More Show Less

BMW B58 / S58 Billet Engine Oil Cap

T#:31059467

Part#: 201-0396-BLU

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The Precision Raceworks Billet Engine Oil Cap is a functional and stunningly stylish way to add a nice touch to any engine bay! Many people don't realize it but the OEM caps have a pressure release valve built into them. Precision Raceworks has designed their engine oil cap in a way that allows the re-use of the pressure release valve from your stock oil cap. These caps offer superior style and performance-grade components that guarantee a reliable fit every time. Durable billet aluminum construction provides long-lasting protection and dependability that will upgrade your engine bay for years to come.

Show More Show Less

OEM Mann Oil Filter Kit - N57 3.0L, N47 2.0L

T#:363613

Part#: 11428507683

Ships in 8 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

This is a German made OEM Mann replacement oil filter for your BMW. Includes a new filter, seal, and o-ring.

Black Billet Engine Fluid Cap Set - B58 / S58

T#:38161697

Part#: 622-0290-BLK

Ships in 9 Business Days

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

BMW B58 / S58 Black Billet Engine Fluid Cap Set is a premium upgrade designed to enhance both the performance and aesthetics of your BMW’s engine bay. Crafted from high-quality billet aluminum, this cap set provides superior durability while replacing the factory plastic caps for a sleek, high-end look.

Engineered to maintain full OEM functionality, these caps integrate the original pressure relief valves, ensuring proper system operation. The deep black anodized finish adds a bold and aggressive appearance while offering excellent resistance to heat and corrosion.

Precision-machined billet aluminum – Stronger and more durable than factory plastic caps
OEM pressure relief compatibility – Ensures safe and reliable system performance
Sleek black anodized finish – Adds a high-performance look to your engine bay
Heat and corrosion-resistant – Built to withstand extreme conditions for long-lasting reliability
Direct replacement design – Fully replaces factory caps for a seamless fit
Simple installation – Requires swapping OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Black Billet Engine Fluid Cap Set, combining premium style with high-performance reliability.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Blue - BMW N20/52/54/55 ...

T#:5122282

Part#: TRIPLECAPBLUE1

In Stock

$ 251.99 USD

Add to Wish List

Qty

$ 251.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Oil Pump Chain

T#:26271803

Part#: 11417584079

In Stock

Sale - Save 21% $ 35.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.55 USD

Add to Wish List

Qty

Sale - Save 21%

$ 35.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.55 USD

Add to Wish List

FTP Motorsport Oil Catch Can - F3X N20 2.0L

T#:586831

Part#: SG80039-3

Special Order: No Guaranteed ETA

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

Modern engines are designed to consume no oil. Even with advanced technology, sometimes an old fashion solution is the best kind. Oil consumption is a leading cause of poor fuel economy, failed emissions, and exhaust smoke. This catch can kit comes complete and ready to separate air and oil so your engine can breathe properly again. Features: Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Large Intake / Exhaust No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Lightweight Aluminum

Show More Show Less

Bremmen Oil Filter Housing And Heat Exchanger

T#:8677178

Part#: 11428596283

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Includes heat exchanger and gaskets. ?OE Cross References: 11428585624 11428596283

MMX Oil Thermostat Dress-Up Caps - Black

T#:5269482

Part#: MMR03-0502BL

Special Order: No Guaranteed ETA

$ 136.99 USD

Add to Wish List

Qty

$ 136.99 USD

Add to Wish List

This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMX Oil Pressure Gauge Adaptor - Dark Anthracite

T#:4552049

Part#: MMR03-0502-KP

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.

Show More Show Less

MMX High Performance Oil Filter - BMW B58 & B58TU

T#:29035359

Part#: MMR17-1502

Special Order: No Guaranteed ETA

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.

Show More Show Less

Genuine BMW Oil Pump

T#:528044

Part#: 11417643046

Ships in 4 Business Days

8% off MSRP $ 1,103.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,010.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,103.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,010.99 USD

Add to Wish List

The oil pump is responsible for making sure your engine is getting the proper oil flow.

Nissens Oil Cooler - Multiple BMWs

T#:380463

Part#: 11427525333

Ships in 6 Business Days

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

Magnetic Billet Oil Filter Housing Cap For B58 - Red Anodized ...

T#:5269542

Part#: OILCAPB58RED

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.

Show More Show Less

URO Premium Aluminum Oil Filter Housing And Cooler Assembly Upgrade K...

2X Entries For Our G87 M2 Sweepstakes!

T#:43750252

Part#: 11428507697PRMK

Ships in 1 Business Day

$ 604.99 USD

Add to Wish List

Qty

$ 604.99 USD

Add to Wish List

If you have noticed a mixture of coolant and oil, have consistently suffered from unexplained coolant loss, or if your BMW's engine has higher mileage, there is a good chance that your factory plastic oil filter housing has cracked and/or failed. This Aluminum URO oil filter housing and cooler is a complete replacement of your factory unit, which eliminates the possibility of failure due to weak materials.

Show More Show Less

OEM Mahle/Mann Oil Filter - Most 2006+ 6 cylinder, N52/N54/N55 ...

T#:4162

Part#: 11427566327

In Stock

$ 14.27

This product was last offered at the strikethrough price on
06-01-2026

$ 11.19 USD

Add to Wish List

Qty

$ 11.19 USD

Add to Wish List

Replacement oil filter kit for most 2006 and newer 6 cylinder BMWs (see list below). This filter is for the N52/N54/N55 engine, the engine used in 2006+ BMWs. It's also used in the 2015+ F80 M3/M4 but BMW also recommends replacing the oil drain plug at the same time (sold separately).

Show More Show Less

Genuine BMW Asa-bolt - 11427540759

T#:35366

Part#: 11427540759

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Genuine BMW Asa-Bolt - M8X28
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Oil Drain Plug

T#:41188174

Part#: 11137535106TKT

In Stock

Sale - Save 29% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Qty

Sale - Save 29%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.35 USD

Add to Wish List

Includes a one time use crush washer.

Genuine BMW Oil Drain Plug Crush Washer - Multiple BMWs & MINIs ...

T#:6488

Part#: 07119963151

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Replace your oil drain plug sealing washer ever oil change to prevent the chance of oil leaks and a stained driveway.

Sealing Cap For Pressure Line

R134A

T#:20467

Part#: 64538387438

Ships Today

$ 3.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.27 USD

Add to Wish List

Qty

$ 2.27 USD

Add to Wish List

Genuine BMW Sealing Cap For Pressure Line
This item fits the following BMW Chassis:
E36 M3,E60 M5,E63 M6,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E36,E38,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12

Show More Show Less

Screw Plug - 11137535106

We Price Match - Give Us A Call or Chat!

T#:22208

Part#: 11137535106

In Stock

$ 9.99

This product was last offered at the strikethrough price on
02-15-2026

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

SCREW PLUG for OIL PAN

Victor Reinz Oil Drain Plug Crush Washer - Multiple BMWs & MINIs ...

T#:340629

Part#: 07119963151

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Replace your oil drain plug sealing washer ever oil change to prevent the chance of oil leaks and a stained driveway.

URO Oil Filler Cap - E90 E92 E60 F10 F01 E83 F25 F70

T#:50031925

Part#: 11128655331

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Replaces broken or damaged oil filler cap.

OEM Hengst Oil Filter Kit - BMW N20 N55

5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:587757

Part#: 11427953125

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

Includes all necessary o-rings required during an oil service.

Genuine BMW Gasket Ring - 07119963132

T#:28583

Part#: 07119963132

In Stock

12% off MSRP $ 2.42

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.12 USD

Add to Wish List

Qty

12% off MSRP

$ 2.42

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.12 USD

Add to Wish List

Genuine BMW Gasket Ring
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F01,F02,F10,F12,F13,F15,F80 M3,F82 M4,F83,i12

Genuine BMW Asa-bolt - 11427540763

T#:35367

Part#: 11427540763

In Stock

$ 4.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Genuine BMW Asa-Bolt - M8X43
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Gasket

T#:36071

Part#: 11537584829

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Genuine BMW Gasket -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Drain Plug Sealing Washer

T#:517811

Part#: 07119963151

In Stock

Sale - Save 7% $ 1.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1.85 USD

Add to Wish List

Qty

Sale - Save 7%

$ 1.99

This product was last offered at the strikethrough price on
06-25-2026

$ 1.85 USD

Add to Wish List

Genuine BMW Oil Drain Plug - B58 B48 B46 B38 N55

T#:360588

Part#: 11137535106

In Stock

5% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.88 USD

Add to Wish List

Qty

5% off MSRP

$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.88 USD

Add to Wish List

Need to replace your oil drain plug? Here is the original drain plug to ensure a tight fit and perfect seal!

Fits the following BMW's:
B58 B48 B46 B38 N55

Bremmen Engine Oil Drain Plug - Includes Seal - BMW B38 B48 B46 B58 ...

T#:640158

Part#: 11137535106

In Stock

Sale - Save 17% $ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.99 USD

Add to Wish List

Qty

Sale - Save 17%

$ 5.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4.99 USD

Add to Wish List

Reduce chances of an oil leak when changing your vehicle's motor oil with a new drain plug and seal!

Genuine BMW Asa-bolt - 11427540758

T#:35365

Part#: 11427540758

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Genuine BMW Asa-Bolt
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW Securing F Engine Sprocket - 11317523891

T#:34027

Part#: 11317523891

In Stock

6% off MSRP $ 11.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.08 USD

Add to Wish List

Qty

6% off MSRP

$ 11.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 11.08 USD

Add to Wish List

Genuine BMW Securing F Engine Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Oil Level Sensor Gasket Ring - Multiple BMWs

T#:7169

Part#: 12611744292

In Stock

$ 9.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

If you are replacing your oil level sensor for any reason, it is highly recommended that you replace this seal as well to prevent any future leaks. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

Genuine BMW Oil Filter Kit - N20 N54 N55

T#:401546

Part#: 11427953129

In Stock

25% off MSRP $ 23.25

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.37 USD

Add to Wish List

Qty

25% off MSRP

$ 23.25

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.37 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Oiling System for BMW 3 Series F30 (2012+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results