BMW Drivetrain Parts for BMW 3 Series F30 (2012+)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

Automatic Transmission Service Kit
10X Entries Into Our F80 M3 Sweepstakes
For GA8HP70Z or GA8HP45Z automatic transmissions
Packaged by Turner - Corporate Logo
T#:5389733
Part#: 24118612901TMSKT
In Stock
Sale - Save 20% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 173.33 USD
Free Shipping
Sale - Save 20%
$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 173.33 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles
Show More Show Less
Packaged by Turner - Corporate Logo
T#:31191945
Part#: TMS8HPATSKT1
In Stock
Sale - Save 1% $ 209.99

This product was last offered at the strikethrough price on
10-01-2026

$ 208.47 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 209.99

This product was last offered at the strikethrough price on
10-01-2026

$ 208.47 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less
N54/N55 Transmission Mounting Hardware
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:26038537
Part#: 23001222894KT1
Ships in 1 Business Day
$ 76.99 USD
Free Shipping on orders $49 and up
Includes hardware for the bell housing, starter, and new dowels for aligning the transmission on the engine.

Automatic Transmission Service Kit - With Aluminum Oil Pan
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:53644251
Part#: URO011913KT
In Stock
New Item
$ 259.09 USD
Free Shipping on orders $49 and up
$ 259.09 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure.
Show More Show Less

GSP North America - Corporate Logo
T#:27238720
Part#: NCV27043
In Stock
$ 131.99 USD
Free Shipping on orders $49 and up
GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 550 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional
Show More Show Less
Packaged by Turner - Corporate Logo
T#:37655994
Part#: N55PCTKT
Ships on Dec 14, 2026
Sale - Save 8% $ 1,299.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,193.39 USD
Sale - Save 8%
$ 1,299.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,193.39 USD

Turner Motorsport Lightweight N55 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N55-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N55 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N55 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

Show More Show Less

Ultimate Clutch Pedal refresh kit for various BMW Models
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41255915
Part#: UCP301TKT
Back Ordered
$ 413.99

This product was last offered at the strikethrough price on
04-22-2026

$ 412.99 USD
Free Shipping on orders $49 and up
$ 412.99 USD
Free Shipping on orders $49 and up
Includes brand-new guides, spring, and hardware for a complete, hassle-free installation—everything needed for a full OEM-quality upgrade.
Burger Motorsports - Corporate Logo
T#:637547
Part#: BMS-DSBB-F
Back Ordered
Starting at $ 129.00 USD
Free Shipping
Starting at $ 129.00 USD
Free Shipping
The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.
Show More Show Less

GSP North America - Corporate Logo
T#:27238721
Part#: NCV27044
In Stock
$ 144.99 USD
Free Shipping on orders $49 and up
GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 841 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional
Show More Show Less

Front and Rear Differential Service Kit - F3x
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56327180
Part#: F3XAWDFDKT5
In Stock
New Item
Sale - Save 1% $ 104.99

This product was last offered at the strikethrough price on
09-21-2026

$ 103.54 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 104.99

This product was last offered at the strikethrough price on
09-21-2026

$ 103.54 USD
Free Shipping on orders $49 and up
This kit combines Red Line 75W85 GL-5 Synthetic Gear Oil with Rein OEM replacement plugs in order to perform a full drain and fill service on both of your differentials
Packaged by Turner - Corporate Logo
T#:1241340
Part#: 24118612901T3KT
Back Ordered
$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 473.99 USD
Free Shipping
$ 473.99 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:41897500
Part#: FW-075-AL250TKT
Ships on Dec 14, 2026
$ 1,759.99 USD
$ 1,759.99 USD
Upgrade your BMW's drivability and clutch durability with the ClutchMasters Complete Clutch Kit w/ Aluminum Flywheel – FX250 Stage 2 from Turner Motorsport—a refined yet capable solution for the performance-minded daily driver
Show More Show Less


GSP CV Axle Assembly - Rear Left - BMW F22/23 F3X
For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ... For vehicles with an Auto or Sport Auto Transmission
GSP North America - Corporate Logo
T#:27238726
Part#: NCV27030
In Stock
$ 162.99 USD
Free Shipping on orders $49 and up
$ 162.99 USD
Free Shipping on orders $49 and up
GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 29.09 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes
Show More Show Less
Packaged by Turner - Corporate Logo
T#:554535
Part#: 8HPATSKT
In Stock
Sale - Save 4% $ 384.99

This product was last offered at the strikethrough price on
08-04-2026

$ 370.10 USD
Free Shipping
Sale - Save 4%
$ 384.99

This product was last offered at the strikethrough price on
08-04-2026

$ 370.10 USD
Free Shipping

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

  • Automatic transmission filter with associated hardware
  • Oil pan gasket
  • Drain plug with sealing washer
  • Fill plug with sealing washer
  • 7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

Show More Show Less
Packaged by Turner - Corporate Logo
T#:31191944
Part#: TMS8HPATSKT
In Stock
$ 256.99 USD
Free Shipping on orders $49 and up
$ 256.99 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Reline D6 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555765
Part#: PBTSRKT54
In Stock
Sale - Save 23% $ 418.20

This product was last offered at the strikethrough price on
05-03-2026

$ 322.00 USD
Free Shipping
Sale - Save 23%
$ 418.20

This product was last offered at the strikethrough price on
05-03-2026

$ 322.00 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555744
Part#: PBTSRKT34
In Stock
Sale - Save 18% $ 326.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.20 USD
Free Shipping
Sale - Save 18%
$ 326.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.20 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555777
Part#: PBTSRKT66
In Stock
$ 148.99 USD
Free Shipping
$ 148.99 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

Rear Differential Service Kit for various BMW Models
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:42133544
Part#: 835225790TKT
In Stock
Sale - Save 2% $ 60.99

This product was last offered at the strikethrough price on
09-21-2026

$ 59.72 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 60.99

This product was last offered at the strikethrough price on
09-21-2026

$ 59.72 USD
Free Shipping on orders $49 and up
The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5
GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X
For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ... For vehicles with an Auto or Sport Auto Transmission
GSP North America - Corporate Logo
T#:27238727
Part#: NCV27031
Ships in 1 Business Day
$ 140.99 USD
Free Shipping on orders $49 and up
$ 140.99 USD
Free Shipping on orders $49 and up
GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 793 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes
Show More Show Less

South Bend Clutch K70526-02-SS-DXD-B-SMF
For Vehicles with production date from 2007
South Bend Clutch - Corporate Logo
T#:14585007
Part#: K70526-02-SS-DXD
Ships in 1 Business Day
$ 1,302.99 USD
Free Shipping on orders $49 and up
Drag racing requires a Single Mass Steel Flywheel to be included with each kit when the original design is Dual Mass Flywheel. This clutch package is built to handle heavily modified cars and is designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass, and are assembled with all high-carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction coefficient, rapid heat dissipation and abrupt engagement characteristics. Recommended uses drag, pulling, and drifting.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:556364
Part#: F30335IDMKT
Ships in 3 Business Days
$ 545.99

This product was last offered at the strikethrough price on
08-09-2026

$ 476.99 USD
Free Shipping
$ 476.99 USD
Free Shipping
South Bend Clutch Stage 3 Daily Driver Clutch Kit
For Vehicles with production date from 2007
South Bend Clutch - Corporate Logo
T#:14585010
Part#: K70526-02-SS-O-S
Ships in 1 Business Day
$ 1,074.99 USD
Free Shipping on orders $49 and up
South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for a single mass flywheel (SMF), when the original design is a dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race-engineered (SS) and SFI-approved with a significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, creating a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high-performance street machine and occasional track use.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555750
Part#: PBTSRKT39
Ships in 1 day
$ 154.99 USD
Free Shipping
$ 154.99 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less


Driveshaft Overhaul Kit - F30
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41863717
Part#: 26117511454T1KT
In Stock
$ 391.99

This product was last offered at the strikethrough price on
09-10-2026

$ 390.09 USD
Free Shipping on orders $49 and up
$ 390.09 USD
Free Shipping on orders $49 and up
This comprehensive kit includes a giubos, center support bearing and all necessary hardware for installation.
SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41931290
Part#: SBB58A2STG3KT
Ships on Dec 14, 2026
$ 1,668.99 USD
$ 1,668.99 USD
The SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3 is the smart choice for BMW drivers demanding uncompromised performance and dependable power delivery for both street and sport applications.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:556365
Part#: F30335IDMKT2
Ships in 1 day
$ 636.99 USD
Free Shipping
$ 636.99 USD
Free Shipping

Front Wheel Bearing Assembly With Hardware - F-Chassis
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:42099843
Part#: 31206876844TKT
Ships in 3 Business Days
Sale - Save 3% $ 226.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.87 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 226.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.87 USD
Free Shipping on orders $49 and up
This kit includes updated M12x1.25 screws, required for installation along with brand new Hudson wheel bearings!

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 2
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41931277
Part#: SB53A3STG2KT
Ships on Dec 14, 2026
$ 1,547.99 USD
Free Shipping on orders $49 and up
$ 1,547.99 USD
Free Shipping on orders $49 and up
The SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 2 delivers performance you can feel, making it the go-to solution for BMW enthusiasts looking to push their build without compromising drivability.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:41931281
Part#: SB53A3STG3PKT
Ships on Dec 14, 2026
$ 1,735.99 USD
Free Shipping on orders $49 and up
$ 1,735.99 USD
Free Shipping on orders $49 and up
For BMW owners demanding consistent performance, faster throttle response, and long-lasting clutch life, the SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 3+ delivers unmatched value and performance.
Show More Show Less

Driveshaft Overhaul Kit - BMW F30 335i xDrive
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:53608885
Part#: TF30335XDOKT
Ships on Oct 26, 2026
New Item
$ 316.99

This product was last offered at the strikethrough price on
08-13-2026

$ 301.99 USD
Free Shipping on orders $49 and up
$ 301.99 USD
Free Shipping on orders $49 and up
The flex disc (aka universal joint or guibo/giubo) and center support bearing (CSB) often fail over time. A failing flex disc can cause clunks when shifting from park to reverse/drive, driveline slop, and excess vibrations when accelerating. A failing CSB will often cause a rhythmic vibration under the center console that increases in tempo as the car increases in speed, squealing or grinding noises from the bearing failure, and driveline vibration/shaking at higher speeds. When replacing either of these items, it is best to replace the associated components to ensure your driveshaft is properly supported and connected to the transmission output and differential input. This kit includes all of the basic items needed to complete this service in your BMW.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:1241338
Part#: 24118612901T2KT
Back Ordered
$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 473.99 USD
Free Shipping
$ 473.99 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:1241337
Part#: 24118612901T1KT
Back Ordered
Sale - Save 4% $ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 442.01 USD
Free Shipping
Sale - Save 4%
$ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 442.01 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

Burger Motorsports - Corporate Logo
T#:14915970
Part#: FG1B58TOC
Back Ordered
7% off MSRP $ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD
Free Shipping on orders $49 and up
Everyone knows that high heat is the enemy of your automatic transmission. And that higher power levels generate more transmission fluid heat which will cause a trans slip. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity B58 Gen1 Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity front-mounted air to trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs within the front bumper behind the driver-side kidney grills providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW B58 Gen1 F chassis automatic car running larger than factory turbos. 165ºF (74ºC) transmission oil cooler Improved Racing thermostat included The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity included: (1) High capacity transmission oil cooler (2) Brackets (1) Billet adapter (2) Coolant plugs (1) Improved Racing 165F Thermostat + fittings (4)-10 AN crimped PTFE/SS/Nylon covered lines (6) M6x1.0x12mm bolts, washers and nuts (1) M6x1.0x20mm bolt Compatible with both RHD and LHD, RWD and AWD, ZF8HP50 and ZF8HP70 Transmissions.
Show More Show Less
Short Shifter Rebuild & Upgrade Kit - F22/3 F3X (11/2014+)
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:590685
Part#: PBTSRKT54-1KT
In Stock
Sale - Save 18% $ 264.01

This product was last offered at the strikethrough price on
05-03-2026

$ 216.91 USD
Free Shipping
Sale - Save 18%
$ 264.01

This product was last offered at the strikethrough price on
05-03-2026

$ 216.91 USD
Free Shipping
Bremman Front Wheel Bearing Kit - With Hardware - F2x, F3x
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56363348
Part#: 312068768401KT2
In Stock
New Item
$ 262.49 USD
Free Shipping on orders $49 and up
The Bremmen Parts Front Wheel Hub Assembly Kit restores original chassis dynamics by completely refreshing your BMW’s front hub assemblies while maintaining value.


Vaico - Corporate Logo
T#:44529449
Part#: 24118612901KIT
Ships in 1 Business Day
$ 571.76 USD
Free Shipping on orders $49 and up
$ 571.76 USD
Free Shipping on orders $49 and up
This Automatic Transmission Service Kit for your ZF 8HP transmission is a great choice to ensure your transmission is properly cared for, ensuring many more years of smooth and reliable operation. Transmission fluid can break down over time and filters can clog, leading to poor fluid flow, which can cause starvation of sensitive components and accelerated wear and tear. Replacing the fluid and filter regularly will make sure that internal transmission components are properly lubricated and cooled, helping to extend the lifespan of your transmission.
Show More Show Less
Driveshaft Overhaul Kit - BMW F30 335i, F32 435i Automatic
For vehicles with Automatic Transmissions only
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:53608884
Part#: TF3XADOKT
In Stock
New Item
$ 255.54

This product was last offered at the strikethrough price on
08-13-2026

$ 239.75 USD
Free Shipping on orders $49 and up
$ 239.75 USD
Free Shipping on orders $49 and up
The flex disc (aka universal joint or guibo/giubo) and center support bearing (CSB) often fail over time. A failing flex disc can cause clunks when shifting from park to reverse/drive, driveline slop, and excess vibrations when accelerating. A failing CSB will often cause a rhythmic vibration under the center console that increases in tempo as the car increases in speed, squealing or grinding noises from the bearing failure, and driveline vibration/shaking at higher speeds. When replacing either of these items, it is best to replace the associated components to ensure your driveshaft is properly supported and connected to the transmission output and differential input. This kit includes all of the basic items needed to complete this service in your BMW.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:55317707
Part#: IRPUSSKT2
In Stock
New Item
$ 552.99 USD
Free Shipping on orders $49 and up
Stop guessing where the gate is. Upgrade your connection to the machine and drive your BMW the way it was meant to be driven.

South Bend Clutch Stage 3 Endurance Clutch Kit
For Vehicles with production date from 2007
South Bend Clutch - Corporate Logo
T#:14585012
Part#: K70526-02-SS-TZ-
Ships in 1 Business Day
$ 1,171.99 USD
Free Shipping on orders $49 and up
Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability.​ Stage 3 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 540lbs/ft of torque. Featuring a solid-hub center section for use with an aftermarket Single Mass Flywheel
Show More Show Less

South Bend Clutch - Corporate Logo
T#:25075810
Part#: K70526-02-HD-DXD
Ships in 1 Business Day
$ 1,171.99 USD
$ 1,171.99 USD
Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability.​ Stage 2 Drag Clutch Kits: Recommended for use on the track with an emphasis on Drag racing. Rated to hold 520lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel
Show More Show Less
South Bend Clutch Stage 4 X-Series Clutch Kit
For Vehicles with production date from 2007
South Bend Clutch - Corporate Logo
T#:14585013
Part#: K70526-02-SS-X-S
Ships in 1 Business Day
$ 1,367.99 USD
$ 1,367.99 USD
South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials
Show More Show Less

Stage 3 Endurance Clutch Kit
For Vehicles with production date from 2007
South Bend Clutch - Corporate Logo
T#:366990
Part#: K03099SSTZ
Ships in 1 Business Day
$ 1,171.99 USD
Free Shipping
$ 1,171.99 USD
Free Shipping
The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar friction material is used for its unique static to dynamic ratios of friction co-efficients at high energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. This kit uses the same Race Engineered SFI approved pressure plate as stage 3 daily package. Race engineered pressure plates deliver more transmittable torque and stability, longer life and superior thermal resistance. They also deliver noticeably better dynamics through higher clamp load when driving the vehicle to its limits. Stage 3 Endurance Clutch Kits: Recommend usages are Rally, endurance race, clubsport, autocross, street and daily Conservatively rated to hold 540lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel
Show More Show Less
Front and Rear Differential Service Kit - F3x
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56327200
Part#: F3XAWDFDKT6
Ships in 1 Business Day
New Item
$ 202.99

This product was last offered at the strikethrough price on
10-07-2026

$ 202.27 USD
Free Shipping on orders $49 and up
$ 202.27 USD
Free Shipping on orders $49 and up
This kit combines Motul 75W85 GL-5 Synthetic Gear Oil with Rein OEM replacement plugs in order to perform a full drain and fill service on both of your differentials

FX250 Stage 2 Clutch Kit With Flywheel
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56038062
Part#: 03228-HD0F-DKT2
Ships on Oct 29, 2026
New Item
$ 1,676.99 USD
$ 1,676.99 USD

Packaged by Turner - Corporate Logo
T#:42099841
Part#: SBB58A2STG5KT
Ships on Dec 14, 2026
$ 1,868.99 USD
$ 1,868.99 USD
This Clutch kit is rebuildable, offering long-term reliability for BMW owners pushing their vehicles to the extreme. For drivers seeking uncompromised power transfer and race-ready performance, the Stage 5 clutch kit is the ultimate choice.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099840
Part#: SBB58A2STG4KT
Ships on Dec 14, 2026
$ 1,668.99 USD
$ 1,668.99 USD
This Clutch kit is rebuildable, ensuring long-term reliability and performance for BMW owners pushing their vehicles to the limit. For drivers seeking a balance between race-ready performance and street drivability, this Stage 4 clutch kit is the ultimate upgrade.
Show More Show Less
Stage 2 Endurance Clutch Kit
For Vehicles with production date from 2007
South Bend Clutch - Corporate Logo
T#:25075808
Part#: K7052602HDOCE
Ships in 1 Business Day
$ 948.99 USD
Free Shipping on orders $49 and up
Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability.​ Stage 2 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 450lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel
Show More Show Less


Packaged by Turner - Corporate Logo
T#:556362
Part#: F30328IDMKT2
Ships in 1 day
$ 279.99

This product was last offered at the strikethrough price on
06-08-2026

$ 260.99 USD
Free Shipping
$ 260.99 USD
Free Shipping

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Corteco and Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

  • OEM Corteco Engine Mount (Left & Right)
  • Genuine BMW Transmission Mount
  • New Installation Hardware
Show More Show Less
South Bend Clutch - Corporate Logo
T#:25075818
Part#: K7052602SSXDMF
Ships in 1 Business Day
$ 1,367.99 USD
$ 1,367.99 USD
South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. This kit is designed for use with the OE dual mass flywheel. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials
Show More Show Less