BMW Drivetrain Parts for BMW 3 Series F30 (2012+)

Schwaben Remote Starter Switch

T#:366792

Part#: 010611SCH01A

In Stock

Sale - Save 3% $ 41.99

This product was last offered at the strikethrough price on
05-02-2026

$ 40.73 USD

Add to Wish List

Qty

Sale - Save 3%

$ 41.99

This product was last offered at the strikethrough price on
05-02-2026

$ 40.73 USD

Add to Wish List

Great for compression tests, aligning timing marks, belt installation and much more.

2 Pc Axle Popper Kit

T#:5677376

Part#: CTA4017

In Stock

$ 56.46 USD

Add to Wish List

Qty

$ 56.46 USD

Add to Wish List

Separates half-shafts from transaxle

Hex Low Profile Service Sockets

T#:5175654

Part#: AGA-SS-8-14-K

Ships in 7 Business Days

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

Due to minimal clearance, it’s difficult to get a hex socket in the gaps to remove plugs on rear differentials, transfer case and other engine drain/fill plugs.

BMW / Supra A90 Stage 4 Performance Clutch Kit (for SPEC single-mass ...

T#:568757

Part#: SB534-2

Ships in 3 Business Days

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

FAG Front Wheel Hub & Bearing Kit - BMW F22/23 F3X xDrive

T#:27905140

Part#: 31206876844FKT

Ships in 2 Business Days

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

If your wheel bearings have started making noise, it's a sign they have begun to fail and will need to be replaced. This kit makes replacing your wheel hubs and bearings easy by including all of the required mounting hardware and new axle bolts.

Show More Show Less

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

SPEC Billet Steel Flywheel (F-Chassis B58)

T#:7036583

Part#: SBB58S-2

Ships in 3 Business Days

$ 748.00 USD

Add to Wish List

Qty

$ 748.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

Basic Clutch Kit - Sachs

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:582128

Part#: K7065101

Ships in 5 Business Days

$ 515.31 USD

Add to Wish List

Qty

$ 515.31 USD

Add to Wish List

Slipping, chatter and difficulty shifting gears are signs that the clutch and pressure plate are worn down. Eventually, these symptoms can worsen, rendering your vehicle useless. The kit includes a new Sachs clutch disc, pressure plate, and throwout bearing. Replace these components, located in the transmission bell housing, to restore your car’s performance.

Show More Show Less

Torque Wrench Adapter

T#:5189117

Part#: AGA-STA

Ships in 7 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Easily torque your driveshaft to specifications.

Lisle CV Boot Clamp Pliers

T#:5512204

Part#: LIS30600

Ships in 1 Business Day

$ 48.99

This product was last offered at the strikethrough price on
05-07-2026

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

Crimps Ear-Type Clamps in Hard-to-Reach Areas.

CV Joint Boot Clamp Band Tool

T#:5122269

Part#: W83011

Ships in 1 Business Day

$ 23.31 USD

Add to Wish List

Qty

$ 23.31 USD

Add to Wish List

Helpful tool for proper axle boot installations.

GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X

For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ... For vehicles with an Auto or Sport Auto Transmission

T#:27238727

Part#: NCV27031

Ships in 2 Business Days

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 793 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

South Bend Clutch Stage 3 Daily Driver Clutch Kit

For Vehicles with production date from 2007

T#:14585010

Part#: K70526-02-SS-O-S

Ships in 1 Business Day

$ 1,074.99 USD

Add to Wish List

Qty

$ 1,074.99 USD

Add to Wish List

South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for a single mass flywheel (SMF), when the original design is a dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race-engineered (SS) and SFI-approved with a significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, creating a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high-performance street machine and occasional track use.

Show More Show Less

AFE Pro GUARD D2 Transmission Pan & Fluid Filter - BMW ZF 8HP45 8HP50...

T#:7244436

Part#: 44-TF015

Ships in 3 Business Days

Sale - Save 8% $ 172.00

This product was last offered at the strikethrough price on
08-03-2026

$ 159.10 USD

Add to Wish List

Qty

Sale - Save 8%

$ 172.00

This product was last offered at the strikethrough price on
08-03-2026

$ 159.10 USD

Add to Wish List

Pro Guard D2 transmission filters represent the next generation in filter technology. This filter is designed to help protect sensitive shift control valves. By providing the transmission fluid more quickly, you get maximum protection that exceeds the OE requirement for filter efficiency. Features: High Flow Rates & Outstanding Filtration Direct Stock Replacement for Easy Installation Exceeds the OE Requirement Helps Protect Sensitive Shift Control Valves Includes Replacement Gasket and Hardware

Show More Show Less

Clutch Masters FX250 Stage 2 Clutch Kit

T#:559357

Part#: 03228-HD0F-D

Ships in 6 Business Days

$ 828.99 USD

Add to Wish List

Qty

$ 828.99 USD

Add to Wish List

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

Extra long life street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing
Pilot Bearing or Bushing
Alignment Tool
Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel

Show More Show Less

AC Hydraulic VL6 Transmission Jack - 1,300lb Capacity

T#:41728758

Part#: TOL-VL6

Ships in 3 Business Days

19% off MSRP $ 667.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 539.99 USD

Add to Wish List

Qty

19% off MSRP

$ 667.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 539.99 USD

Add to Wish List

Having a transmission jack can prevent a lot of struggling and exhaustion from attempting to install a transmission by hand or through some other sketchy method we have all considered. AC Hydraulic's VL3 Transmission Jack is a great transmission jack that will alleviate these issues. In addition to being used for the transmisison, this jack is also great for other lifting operations such as the mounting of springs, fuel tanks, exhaust pipes, and more.

Show More Show Less

9" Twin Disc Clutch Kit - Solid Organic Discs

T#:17804817

Part#: XKBM23596-2G

Ships on Sep 4, 2026

$ 2,057.99 USD

Add to Wish List

Qty

$ 2,057.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. Designed specifically for high horsepower, street driven vehicles, the 9" twin disc organic is the ultimate street clutch. The twin disc organic upgrade optimizes pedal feel and reliability in high horsepower street driven vehicles. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Organic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Organic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

DKM MRX Ceramic Twin-Disc Clutch Kit W/ Flywheel - 215mm - E8X E9X F2...

T#:5987853

Part#: MRX-006-076

Ships on Sep 4, 2026

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MRX Twin Ceramic Disc Clutch Kit is designed to hold up to 650 ft/lbs torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 215mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for upwards of 650 ft/lbs of torque **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

SPEC Aluminum Flywheel (SMF) (FOR USE WITH SPEC CLUTCH ONLY) 135 N55 ...

T#:597417

Part#: SB55A-2

Ships in 3 Business Days

$ 637.00 USD

Add to Wish List

Qty

$ 637.00 USD

Add to Wish List

Clutch Masters FX250 Stage 2 Clutch Kit

For Use With Factory Dual Mass Flywheel Only

T#:559343

Part#: 03075-HD0F-R

Ships in 3 Business Days

$ 828.99 USD

Add to Wish List

Qty

$ 828.99 USD

Add to Wish List

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

Extra long life street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Rigid organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing
Pilot Bearing or Bushing
Alignment Tool
Pressure Plate Bolts

This clutch kit does not include a flywheel.

Show More Show Less

South Bend Clutch K70526-02-SS-DXD-B-SMF

For Vehicles with production date from 2007

T#:14585007

Part#: K70526-02-SS-DXD

Ships in 1 Business Day

$ 1,302.99 USD

Add to Wish List

Qty

$ 1,302.99 USD

Add to Wish List

Drag racing requires a Single Mass Steel Flywheel to be included with each kit when the original design is Dual Mass Flywheel. This clutch package is built to handle heavily modified cars and is designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass, and are assembled with all high-carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction coefficient, rapid heat dissipation and abrupt engagement characteristics. Recommended uses drag, pulling, and drifting.

Show More Show Less

Rubber Engine Mount - Right

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:594919

Part#: 22116855460

In Stock at Vendor

$ 151.99

This product was last offered at the strikethrough price on
07-08-2026

$ 150.69 USD

Add to Wish List

Qty

$ 150.69 USD

Add to Wish List

Excessive driveline vibration is cause by one of a few things, but more than likely, it is the mounts in your vehicle. They keep your engine and transmission secure for more positive shifting and driveline triangulation as well as absorbing vibration. If any of these are occuring in your BMW, it's time to examine your mounts. This motor mount is one step towards repair, it will absorb those nasty vibrations, quieting your cabin and reducing vehicle shake.

Show More Show Less

OE Engine And Transmission Mount Kit - F30 335i (w/o M Sport Package)...

T#:556364

Part#: F30335IDMKT

Ships in 1 Business Day

$ 545.99

This product was last offered at the strikethrough price on
08-09-2026

$ 476.99 USD

Add to Wish List

Qty

$ 476.99 USD

Add to Wish List

SPEC Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

for use with SPEC billet flywheel

T#:35525717

Part#: SB551-2

Back Ordered

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

Fly Wheel Turner

T#:1809145

Part#: W80510

Ships in 1 Business Day

$ 34.69 USD

Add to Wish List

Qty

$ 34.69 USD

Add to Wish List

For turning and holding flexplates and flywheels.

Clutch Masters FX250 Stage 2 Clutch Kit

For Use With Aftermarket Single Mass Flywheel Only

T#:559341

Part#: 03075-HD0F-D

Ships in 3 Business Days

$ 828.99 USD

Add to Wish List

Qty

$ 828.99 USD

Add to Wish List

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

Extra long life street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing
Pilot Bearing or Bushing
Alignment Tool
Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel

Show More Show Less

XACT Flywheel Streetlite

For production vehicles with a 6 bolt flywheel and build date from 01/2009

T#:7828840

Part#: 601030

Ships in 6 Business Days

$ 968.00 USD

Add to Wish List

Qty

$ 968.00 USD

Add to Wish List

Note: Single mass flywheel conversion. For 6-bolt crankshaft. Can be used with both factory clutch kit and ACT clutch kits. Gear rattle is expected 601130 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts. Features: Improved engine response and acceleration Heat-treated forging for strength and toguhness with induction-hardened ring gears for maximum life. One piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears Forged, CNC machined and dynamically computer balanced for smooth high RPM reliability Recommended for street and race use. Gear rattle is expected.

Show More Show Less

Rogue Engineering Rear Carrier Bushing Mount - F8X M2 M3 M4, F3X 3 & ...

For vehicles with a production date from 11/2014+ and a manual transmission

T#:48401514

Part#: RE.RCBM-F8X

Ships on Sep 4, 2026

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

The Rogue Engineering rear shifter carrier bushing is specifically designed to fit the F8X chassis. It replaces the flimsy OEM bushing and secures the manual transmission carrier with a custom-molded urethane bushing in a CNC'd aluminium mount. By installing this bushing, it allows the shifter pattern to be more precise and accurate.

Show More Show Less

Magnetic Pickup Tool

T#:640838

Part#: 1976

Ships in 1 Business Day

$ 102.99

This product was last offered at the strikethrough price on
05-07-2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW Transmission Service Kit - 135i/335i

T#:24179123

Part#: XMS230BM022EXC

Ships in 2 Business Days

$ 735.99 USD

Add to Wish List

Qty

$ 735.99 USD

Add to Wish List

Genuine BMW Automatic transmission radiator

T#:174442

Part#: 17117600535

Ships in 1 day

9% off MSRP $ 351.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 321.99 USD

Add to Wish List

Qty

9% off MSRP

$ 351.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 321.99 USD

Add to Wish List

Genuine BMW Radiator -
This item fits the following BMW Chassis:
F30,F32

Fits BMW Engines including:
N55

Genuine BMW Input shaft seal

T#:542675

Part#: 23128677738

Ships in 1 day

6% off MSRP $ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

6% off MSRP

$ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Radiator Hose - From Left Side of Radiator - F30 F32 F31 ...

T#:174457

Part#: 17127600554

Ships in 1 day

6% off MSRP $ 79.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Qty

6% off MSRP

$ 79.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Genuine BMW Coolant Hose -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Genuine BMW Inner Drive Shaft CV Boot

T#:55947

Part#: 31607570270

Ships in 1 day

9% off MSRP $ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD

Add to Wish List

Qty

9% off MSRP

$ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD

Add to Wish List

Genuine BMW Repair Kit Bellows, Interior -
This item fits the following BMW Chassis:
E90,E92,F01,F02,F06,F10,F12,F13,F30,F31,F32,F33,F34,F36

Genuine BMW Automatic Transmission Oil Pan With Transmission Filter -...

T#:5229454

Part#: 24115A13115

Ships in 1 day

5% off MSRP $ 276.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 263.99 USD

Add to Wish List

Qty

5% off MSRP

$ 276.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 263.99 USD

Add to Wish List

GA8HP 8 speed automatic transmission. Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This item fits the following BMWs: E71,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Transmission Supporting Bracket - F22, F23, F30, F31, F32, F33, F34, ...

T#:181123

Part#: 22326796613

Ships in 1 day

1% off MSRP $ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Qty

1% off MSRP

$ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Genuine BMW Transmission Supporting Bracket -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

RUBBER MOUNTING REAR

T#:550046

Part#: 33316880637

Ships in 1 day

13% off MSRP $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD

Add to Wish List

Qty

13% off MSRP

$ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD

Add to Wish List

Genuine BMW 6 Speed Clutch Kit - E9X 335i, E60 535i, E82/88 135i, etc...

T#:215892

Part#: 21208631999

Ships in 1 day

15% off MSRP $ 795.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 677.99 USD

Add to Wish List

Qty

15% off MSRP

$ 795.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 677.99 USD

Add to Wish List

Clutch kit includes clutch disc, pressure plate, fork, release bearing, and bolts.

Genuine BMW Rear Wheel Bearing

T#:60597

Part#: 33416792356

Ships in 1 day

8% off MSRP $ 150.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 138.99 USD

Add to Wish List

Qty

8% off MSRP

$ 150.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 138.99 USD

Add to Wish List

Genuine BMW Angular Contact Ball Bearing,Radial - 42X75X37
This item fits the following BMW Chassis:
F22,F30,F32

Genuine BMW CV Axle - Front Left - BMW F22/23 F3X

T#:174687

Part#: 31607597693

Ships in 3 Business Days

4% off MSRP $ 1,358.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,298.99 USD

Add to Wish List

Qty

4% off MSRP

$ 1,358.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,298.99 USD

Add to Wish List

Turner Motorsport offers the Genuine BMW CV Axle Output Shaft, part number 31607597693, designed specifically for BMW vehicles. This output shaft ensures smooth and efficient power transfer from the transmission to the wheels of your BMW. Crafted with precision and quality materials, this genuine BMW part guarantees optimal performance and durability for your vehicle. Benefits: Genuine BMW quality assurance Designed specifically for BMW vehicles Ensures smooth and efficient power transfer Precision-crafted for optimal performance Durable construction for long-lasting reliability

Show More Show Less

Genuine BMW Guide Tube - 23118609225

T#:180381

Part#: 23118609225

Ships in 1 day

2% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.99 USD

Add to Wish List

Qty

2% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.99 USD

Add to Wish List

Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F22,F30,F32,F33,F80 M3,F82 M4,F83

Found on the input shaft of the automatic transmission

Show More Show Less

Genuine BMW Output shaft seal

T#:572359

Part#: 23128742716

Ships in 1 day

2% off MSRP $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD

Add to Wish List

Qty

2% off MSRP

$ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD

Add to Wish List

Genuine BMW Remanufactured Clutch Kit - F3X 328i 428i

T#:48905

Part#: 21207625147

Ships in 1 day

15% off MSRP $ 795.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 677.99 USD

Add to Wish List

Qty

15% off MSRP

$ 795.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 677.99 USD

Add to Wish List

Genuine BMW Set Clutch Parts - D=240Mm
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

Genuine BMW Universal Joint - 26117610372

T#:53724

Part#: 26117610372

Ships in 1 day

6% off MSRP $ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD

Add to Wish List

Qty

6% off MSRP

$ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD

Add to Wish List

Located between the driveshaft and the transmission, this disc absorbs hard vibrations and shocks from shifting gears. As time goes on, the rubber degrades and replacement is the only option. If you are noticing increased vibrations and clunking, it may be time to replace this disc to ensure that your vehicle drives the way it should. Inspect your guibo for wear and damage every other oil change - Replace at the first sign of wear. Genuine BMW Universal Joint - Lk=96Mm/M12 This item fits the following BMW Chassis: F10,F22,F30,F31,F32,F33,F34,F36

Show More Show Less

Genuine BMW Input shaft seal

T#:15313

Part#: 27107539262

Ships in 1 day

6% off MSRP $ 61.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Qty

6% off MSRP

$ 61.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.99 USD

Add to Wish List

Genuine BMW Shaft Seal - 49,6X90X8
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E53 X5,E70 X5,E71 X6,E83 X3,E90,E92,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Genuine BMW CV Axle - Front Right - BMW F22/23 F3X

T#:174688

Part#: 31607597694

Ships in 1 day

4% off MSRP $ 1,358.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,298.99 USD

Add to Wish List

Qty

4% off MSRP

$ 1,358.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,298.99 USD

Add to Wish List

Turner Motorsport offers the Genuine BMW CV Axle Output Shaft, part number 31607597694, designed specifically for BMW vehicles. This output shaft ensures smooth and efficient power transfer from the transmission to the wheels of your BMW. Crafted with precision and quality materials, this genuine BMW part guarantees optimal performance and durability for your vehicle. Benefits: Genuine BMW quality assurance Designed specifically for BMW vehicles Ensures smooth and efficient power transfer Precision-crafted for optimal performance Durable construction for long-lasting reliability

Show More Show Less

Flex Disc - Guibo - E46xi, X3, X5, X6

T#:12089

Part#: 26111229360

Ships in 1 day

6% off MSRP $ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD

Add to Wish List

Qty

6% off MSRP

$ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD

Add to Wish List

This OEM BMW replacement flex disc (aka: the guibo) is a vibration dampener mounted on the back of the transmission which connects to the driveshaft. When it has worn, it produces a terrible vibration throughout the car. It's especially noticeable at low speeds and when starting from a standstill. Oil leaking from the back of the transmission will significantly reduce its life.

This item fits the following BMWs:
1999-2005 E46 BMW 325xi 330xi
2011+ F10 BMw 528i xDrive
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
2004-2006 E53 BMW X5 4.4i X5 4.8is
2009+ E70 BMW X5 4.8i X5 xDrive35d X5 xDrive48i X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M

Show More Show Less

Genuine BMW Transfer Case Mount Kit - BMW F22/23 F3X xDrive

T#:27938431

Part#: 22316786566KT

Ships in 1 day

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

If your transfer case mount is worn out, this can lead to excess movement and clunking noises coming from the center of your car. Luckily, this is an easy fix and this kit includes the few items needed to eliminate these issues. Included: Genuine BMW Transfer Case Mount Genuine BMW Hex Bolt & Nut

Show More Show Less

Genuine BMW Front Wheel Bearing Repair Kit

For RWD models ONLY

T#:626819

Part#: 31222466784

Ships in 4 Business Days

6% off MSRP $ 385.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 362.00 USD

Add to Wish List

Qty

6% off MSRP

$ 385.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 362.00 USD

Add to Wish List

Genuine BMW wheel hub and bearing replacement.

Genuine BMW Seal - Transfer Case Output Shaft

Front

T#:15314

Part#: 27107539266

Ships in 1 day

6% off MSRP $ 48.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Qty

6% off MSRP

$ 48.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD

Add to Wish List

Genuine BMW Shaft Seal
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E53 X5,E70 X5,E71 X6,E83 X3,E90,E92,F01,F02,F06,F10,F12,F13,F25 X3,F30,F31,F32,F33,F34,F36

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Drivetrain Parts for BMW 3 Series F30 (2012+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results