BMW Engine Parts for BMW 3 Series F30 (2012+)

We are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.

Our kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!

Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.

Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

• Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical
• 4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! 
• Fully reversible/removable and back to stock without a trace in minutes
• Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat
• All connecting points sealed with fuel safe Viton o-rings
• Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support
• CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
• Power/CANBus 4-wire plug and play harness
  • 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
  • 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
• Continental Flex Fuel sensor 3-wire harness
• Custom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board
• Custom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required.
• -6 AN fitting by Racetronix

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

The BMW N47, N57 Diesel Timing Tool Kit is equipped with essential specialty tools designed for timing the N47, N47S 2.0L twin camshaft diesel engines, and N57 3.0L diesel engines found in BMW 1, 3, 5 Series, and X3 models spanning from 2007 to 2015.

This comprehensive kit includes a camshaft setting plate, flywheel locking pin, crankshaft turning tool, and a high-pressure pump sprocket retaining tool specifically crafted for pump service.

It consolidates BMW part numbers 115320, 118760, 116480, 118741, 118742, 113340, 114320, providing all the necessary components for complete timing and pump service on N47, N47S (2007-2010), and N57 (2008-2015) engines.

Turbocharger Coolant Pipes CHT0903 are high-performance components designed to efficiently manage coolant flow in turbocharged engines. Available from Turner Motorsport, these coolant pipes are specifically engineered for BMW vehicles, ensuring optimal cooling of the turbocharger system. By maintaining the right temperature, these pipes help extend the lifespan of your turbocharger while improving engine performance and efficiency.

These Turbocharger Coolant Pipes offer a perfect OEM fit for easy installation, making them ideal for both professionals and BMW enthusiasts. Crafted from durable, heat-resistant materials, they ensure long-lasting reliability and resistance to wear and tear, providing a robust solution for maintaining the performance of your vehicle’s turbocharged engine.

Key Features:

• Specifically designed for turbocharged BMW engines
• Perfect OEM fit for seamless installation
• Efficiently manages coolant flow to the turbocharger
• Enhances turbocharger performance and engine efficiency
• Made from durable, heat-resistant materials
• Available from Turner Motorsport, a trusted provider of high-quality BMW parts

For anyone looking to maintain or upgrade their BMW’s turbocharged engine, these Turbocharger Coolant Pipes are a crucial component that ensures optimal cooling and long-term reliability.