BMW Engine Parts for BMW 3 Series F30 (2012+)

Black Billet Engine Fluid Cap Set - B58 / S58

T#:38161697

Part#: 622-0290-BLK

Ships in 9 Business Days

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

BMW B58 / S58 Black Billet Engine Fluid Cap Set is a premium upgrade designed to enhance both the performance and aesthetics of your BMW’s engine bay. Crafted from high-quality billet aluminum, this cap set provides superior durability while replacing the factory plastic caps for a sleek, high-end look.

Engineered to maintain full OEM functionality, these caps integrate the original pressure relief valves, ensuring proper system operation. The deep black anodized finish adds a bold and aggressive appearance while offering excellent resistance to heat and corrosion.

Precision-machined billet aluminum – Stronger and more durable than factory plastic caps
OEM pressure relief compatibility – Ensures safe and reliable system performance
Sleek black anodized finish – Adds a high-performance look to your engine bay
Heat and corrosion-resistant – Built to withstand extreme conditions for long-lasting reliability
Direct replacement design – Fully replaces factory caps for a seamless fit
Simple installation – Requires swapping OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Black Billet Engine Fluid Cap Set, combining premium style with high-performance reliability.

Show More Show Less

Fuel Filter

5X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:586662

Part#: 13328572522

In Stock

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

Replace your clogged & dirty filter

Precision Raceworks N54 N55 High Performance Ignition Kit - Aftermark...

T#:26238419

Part#: 601-0149

Ships in 9 Business Days

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Precision Raceworks' ignition kit is designed to fit any vehicle with an N54 or N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 4.5 - BMW ...

T#:19858319

Part#: 601-0199

Ships in 9 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH-PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4.5 (6 literes per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support OVER 1,000whp! (Rated for 1000+whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, Slide the bucketless bracket onto side of bucket and close the top hat you are ready to go! Included in the box Genuine OEM fuel pump bucket assembly Pre-assembled with OEM Brushless and mounted Walboro 450 Includes fuel sending unit (fuel level sensor) Upgraded AN-6 fuel feed lines with fuel pressure regulator and return lines<> New In-Line Fuel Filter Plug and play boost reference harness (zero cutting, stripping, crimping) 13psi boost reference switch (hobbs switch) This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Stage 4.5 Pump flow 72psi (5bar): 6 LPM Horsepower Supported Pump Gas: 1,000+ Horsepower Supported 100% E85: 1,000+ Aftermarket EKP Required: No

Show More Show Less

7.89mm(5/16") Male - 7.89mm(5/16") Female - Fuel Line Fitting AN6 PTF...

T#:38094344

Part#: 201-0177

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds

Elring Cylinder Head Cover Valve Cover - BMW F22/23 F3X B46/B48 2.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:44733237

Part#: B09.610

In Stock

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Plastic valve covers are known to warp and crack over time. After numerous heat cycles, plastic becomes brittle and more susceptible to failure. If your B46 / B48 engine has higher mileage and you've noticed vacuum leaks, oil leaks, or PCV failure, this replacement from Elring is a great choice to address the issues and keep your engine leak free!

Show More Show Less

Precision Raceworks Replacement Spark Plug Wires (Pack Of 4) - Blue -...

T#:38195451

Part#: 201-0149

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The Precision Raceworks BMW N20 REPLACEMENT SPARK PLUG WIRES are the same wires that come with our famous BMW N20 HIGH PERFORMANCE IGNITION KIT featuring low resistance high performance spark plug wires. These wires are 100% custom-designed from the ground up and Precision Raceworks is the only company in the world to produce plug wires with boots specific for your N54 BMW to ensure proper fitment and quality. Plug wires are sold in packs of 4 so you get all new plug wires every time. So replace the one you need and keep the rest for spares or replace all 4. All components used meet or exceed OEM requirements and feature seals which are both dust and water resistant. Having problems with your wires click here first for common issues and save yourself some money!

Show More Show Less

Silver Billet Engine Fluid Cap Set - B58 / S58

T#:38161696

Part#: 622-0290-SIL

In Stock

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

BMW B58 / S58 Silver Billet Engine Fluid Cap Set is a high-quality upgrade that replaces the factory plastic caps with durable billet aluminum for enhanced strength and a sleek, premium appearance. Designed for a perfect fit, this cap set enhances both the aesthetics and functionality of your BMW’s engine bay.

Unlike adhesive overlays or plastic replacements, these billet aluminum caps completely replace the OEM components while retaining essential pressure relief functionality. The precision-machined silver finish offers a refined look while providing superior resistance to heat, corrosion, and wear.

Direct replacement – Replaces OEM caps entirely for a factory-like fit
Sleek silver finish – Provides a clean, high-end appearance
Billet aluminum construction – Offers long-lasting durability and strength
OEM pressure relief compatibility – Maintains proper system function
Heat and corrosion-resistant – Engineered to withstand extreme conditions
Easy installation – Requires transferring OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Silver Billet Engine Fluid Cap Set, the perfect blend of style and performance for enthusiasts who demand the best.

Show More Show Less

BMW/MINI Alternator Belt Tensioner Release Tool

T#:640452

Part#: CTA3884

Ships on Oct 14, 2026

$ 60.75 USD

Add to Wish List

Qty

$ 60.75 USD

Add to Wish List

Removes and installs the serpentine belt on B36, B38, B46 & B48 engines

ARP Crank Pulley Bolt Kit - B58

T#:54104145

Part#: 201-2501

Ships on Oct 14, 2026

8% off MSRP $ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Qty

8% off MSRP

$ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Secure your timing, protect your investment, and push your B58 to the limit with the reliability of ARP.

OEM Mahle Fuel Filter - F30/31 N47 2.0L

T#:381082

Part#: 13328572522

Ships on Oct 14, 2026

$ 67.73 USD

Add to Wish List

Qty

$ 67.73 USD

Add to Wish List

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Conical Spring Kit - Set Of 24

T#:21604309

Part#: SPRKFE20N54BE2

Ships in 5 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 88 @ 36.5 Open Pressure: 160 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 7.25 Kit spring: SPR-FE20BE-2 Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24

Show More Show Less

Carrillo BMW Pro-H Connecting Rods - N20 3/8 Bolt - WMC Bolt ...

T#:13332229

Part#: CAR-CRS-N20-WMC

Ships on Oct 14, 2026

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

Precision Raceworks Port Injection Fuel Line - Plate Style PI - BMW N...

T#:38161752

Part#: 201-0148

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Precision Raceworks' Port Injection Fuel Line is designed to be compatible with most plate-style port injection kits on the market. Crafted from high-quality 6061 aluminum, all connections are precisely machined and fully compatible with E85 fuel. The female connectors feature dual seals, ensuring a leak-free performance. The fuel line itself is constructed from smooth-bore PTFE hose, a proven choice for numerous E85 applications. This plug-and-play solution seamlessly integrates with both factory and aftermarket fuel rails, offering a hassle-free way to deliver fuel to your port injection system.

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161737

Part#: 201-0406

Ships on Oct 21, 2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Turbocharger Mounting Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:54495242

Part#: 648.140

Special Order: No Guaranteed ETA

$ 72.99 USD

Add to Wish List

Qty

$ 72.99 USD

Add to Wish List

The Elring Turbocharger Mounting Kit is your complete solution for a flawless installation.

Elring Cylinder Head Gasket - BMW Gen1 B46/B48 2.0L

For vehicles with production from 07/2015 with the B46/B48 Gen1 engine

2X Entries Into Our F80 M3 Sweepstakes

T#:44767276

Part#: 597.170

In Stock

$ 134.99 USD

Add to Wish List

Qty

$ 134.99 USD

Add to Wish List

Head gasket failure is common in higher mileage vehicles or engines that have overheated. The signs of a failed head gasket include milky oil, loss of performance, and a sweet-smelling white smoke from the exhaust. It is essential to replace yours immediately to prevent further damage to your engine. Replaces BMW # 11128654273

Show More Show Less

Elring Valve Cover Gasket Set - BMW F22/23 F3X B58 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:44767267

Part#: 773.910

Special Order: No Guaranteed ETA

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

If your valve cover is leaking oil or you are experiencing vacuum leaks, there is a good chance your valve cover gasket needs to be replaced. This kit from Elring includes the three main valve cover gaskets that need to be replaced, including the inner and outer gaskets, as well as the high-pressure fuel pump gasket located on top of the valve cover. Replaces BMW p/n 11128621951, 11128638124, & 11128633750

Show More Show Less

BMW GEN2 Upgraded High Pressure Pump B58

T#:31291063

Part#: SP-B58-FX350-NEY

Special Order: No Guaranteed ETA

$ 2,348.00 USD

Add to Wish List

Qty

$ 2,348.00 USD

Add to Wish List

The FX-350 is truly Plug and Play for all platforms we are offering and comes with all the lines and hardware needed for a clean easy install.

Vacuum Pipe

10X Entries Into Our F80 M3 Sweepstakes

T#:52586629

Part#: 11157603816

In Stock

Sale - Save 20% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD

Add to Wish List

FTP Motorsport Boost Fitting - N20/N55

T#:582217

Part#: SG80036

Special Order: No Guaranteed ETA

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

If you are planning on running additional boost, keeping tabs on the level is going to be an important factor. For doing this you have many options...Apps, scanners, coding. But what about a good old mechanical gauge? Now you can add one the easy way with this sandwich plate adapter from FTP. Simply remove the factory boost sensor install the plate, re-bolt the boost sensor and you're done.

Show More Show Less

Bremmen Oil Cooler - BMW N52 N20 N55

10X Entries Into Our F80 M3 Sweepstakes

T#:4455968

Part#: 11427525333

Special Order: No Guaranteed ETA

Sale - Save 15% $ 39.99

This product was last offered at the strikethrough price on
09-16-2026

$ 33.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 39.99

This product was last offered at the strikethrough price on
09-16-2026

$ 33.99 USD

Add to Wish List

Also referred to as a heat exchanger, this radiator type component keeps your oil temps low.

Febi Oil Pan Gasket

We Price Match - Give Us A Call or Chat!

T#:16375133

Part#: 11137600482

Ships on Dec 24, 2026

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

Replace your worn out and leaking oil pan gasket and avoid having to top off between oil changes.

MMX Oil Pressure Gauge Adaptor - Dark Anthracite

T#:4552049

Part#: MMR03-0502-KP

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.

Show More Show Less

MMX High Performance Oil Filter - BMW B58 & B58TU

T#:29035359

Part#: MMR17-1502

Special Order: No Guaranteed ETA

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.

Show More Show Less

Valve Cover Gasket - Set

10X Entries Into Our F80 M3 Sweepstakes

T#:54068660

Part#: 11127587804

In Stock

Sale - Save 15% $ 26.99

This product was last offered at the strikethrough price on
09-16-2026

$ 22.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 26.99

This product was last offered at the strikethrough price on
09-16-2026

$ 22.94 USD

Add to Wish List

Crankshaft

10X Entries Into Our F80 M3 Sweepstakes

T#:38924612

Part#: 11217580483

Special Order: No Guaranteed ETA

Sale - Save 3% $ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD

Add to Wish List

Direct replacement N55 crankshaft for a fraction of the cost of Genuine

OEM Kolbenschmidt Adjustment Unit - Exhaust Camshaft - BMW N52 N55 S5...

T#:31092510

Part#: 11367583208

Special Order: No Guaranteed ETA

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the exhaust camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.

Show More Show Less

OEM Kolbenschmidt Adjustment Unit - Inlet Camshaft - BMW N52 N55 S55 ...

T#:31092509

Part#: 11367583207

Special Order: No Guaranteed ETA

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

This timing chain camshaft gear is the thicker gear located toward the front of the engine on the end of the intake camshaft. This is sometimes changed when replacing the timing chain. BMW # 11367578877 may also be required when servicing this part.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW N47 N57...

10X Entries Into Our F80 M3 Sweepstakes

T#:23416512

Part#: 6PK1697

In Stock

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

Replaces BMW # 11288519128, 11288512067, and 11288507415 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - BMW N47 N57 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:23516116

Part#: 6PK1697TKT

Ships in 1-2 days

$ 206.99

This product was last offered at the strikethrough price on
07-15-2026

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and new tensioner bolts. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

N20 Vacuum Hose - 11657607726

10X Entries Into Our F80 M3 Sweepstakes

T#:36981055

Part#: 11657607726

Special Order: No Guaranteed ETA

Sale - Save 20% $ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.26 USD

Add to Wish List

Qty

Sale - Save 20%

$ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 34.26 USD

Add to Wish List

Due to weak rubber construction and exposure to heat, this vacuum hose may be brittle and/or broken.

Replace it with this high-quality piece from Bremmen Parts to ensure proper turbocharger functionality.

Show More Show Less

Hitachi Fuel Pump Camshaft Follower - BMW N20 N55 S55 N63 S63 B48/46 ...

T#:589968

Part#: 11327601233

Back Ordered

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

A faulty camshaft follower can damage the engine and cause incorrect valve timing.

Nissens Oil Cooler - Multiple BMWs

T#:380463

Part#: 11427525333

Ships in 6 Business Days

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55

Show More Show Less

Valve Cover Gasket Set

T#:15478721

Part#: 11127587804

Back Ordered

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

A leaky valve cover gasket makes a mess of your engine, your garage, and allows the life-blood of your engine to escape. Replace leaky valve cover gaskets and always start with a fresh gasket after valve cover removal. Trouble trying to track down your leak? The easiest way to do so is by cleaning your engine, then examining for leaks.

Show More Show Less

OEM INA Timing Chain Sprocket - Inlet Camshaft - BMW N20 2.0L ...

We Price Match - Give Us A Call or Chat!

T#:35998448

Part#: 11367583818KIT

Ships in 7 Business Days

$ 267.99 USD

Add to Wish List

Qty

$ 267.99 USD

Add to Wish List

Replace this so your timing chain meshes perfectly with the gear teeth for optimal performance.

N55 Big Turbo Upgrade - F2X / F3X / F87 M2

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
CARB certified for sale in all 50 states

T#:15544960

Part#: D310-0110A

EO#: D-176-52

Back Ordered

Sale - Save 14% $ 1,980.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,709.96 USD

Add to Wish List

Qty

Sale - Save 14%

$ 1,980.99

This product was last offered at the strikethrough price on
06-24-2026

$ 1,709.96 USD

Add to Wish List

Elevate Turbocharger Performance with Upgraded Kit

Upgrade your turbocharger's performance with this kit, presenting an impressive 30% increase in the compressor wheel size within the stock turbocharger housing. Experience a significant power boost by elevating pressure at high RPMs while maintaining efficient operation. The enhanced thrust system ensures prolonged turbocharger life, and for optimized performance, consider pairing it with Stage 4 Dinan software to manage the additional boost.

Key Features:

Increases compressor size by 30%
Boosts power through increased boost pressure
Upgraded thrust system for turbocharger longevity
DINANTRONICS Stage 4 software recommended for optimal engine performance
Earns 2 points towards your Dinan badge

With over 35 years of expertise, Dinan leads BMW tuning advancements, prioritizing balanced enhancements that preserve the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan parts undergo rigorous testing, ensuring reliability. Upon significant part installation, enthusiasts receive an exclusive trunk badge, signifying the transition to Dinan performance.

Show More Show Less

N55 Cometic Head Gasket - 0.052"

T#:31522946

Part#: C15476-052

Back Ordered

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Spark Plugs - Set Of Six

T#:14982199

Part#: 121200405516KT

Back Ordered

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

URO Premium Aluminum Oil Filter Housing And Cooler Assembly Upgrade K...

2X Entries Into Our F80 M3 Sweepstakes

T#:43750252

Part#: 11428507697PRMK

In Stock

$ 604.99 USD

Add to Wish List

Qty

$ 604.99 USD

Add to Wish List

If you have noticed a mixture of coolant and oil, have consistently suffered from unexplained coolant loss, or if your BMW's engine has higher mileage, there is a good chance that your factory plastic oil filter housing has cracked and/or failed. This Aluminum URO oil filter housing and cooler is a complete replacement of your factory unit, which eliminates the possibility of failure due to weak materials.

Show More Show Less

OEM Rein Turbocharger Oil Supply Line - BMW B46/B48 2.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:32748261

Part#: 11428487371

In Stock

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

This metal supply line supplies oil to the turbocharger, keeping it lubricated and regulating temperatures. If yours has developed a leak, replace it as soon as possible to prevent oil loss and damage to the turbocharger.

Show More Show Less

URO Variable Valve Timing Sprocket - Intake Camshaft - BMW N20 2.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:43750198

Part#: 11367583818

Ships in 1 Business Day

$ 187.99 USD

Add to Wish List

Qty

$ 187.99 USD

Add to Wish List

This sprocket is the replacement cam gear for the inlet camshaft. Replace this so your timing chain meshes perfectly with the gear teeth for optimal performance.

URO Rubber Engine Mount - Left

2X Entries Into Our F80 M3 Sweepstakes

T#:2423589

Part#: 22116787659

Ships in 1 Business Day

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

URO Rubber Mounting Left -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F36

Rein Engine Oil Filter Housing Cap CPL0070

2X Entries Into Our F80 M3 Sweepstakes

T#:34181283

Part#: 11427926064

Ships in 1 Business Day

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The Engine Oil Filter Housing Cap CPL0070 is a vital component for BMW vehicles, designed to provide a secure and effective seal for the engine oil filter housing. This high-quality cap is essential for maintaining optimal engine performance by preventing oil leaks and ensuring proper oil pressure. Perfect for both professional mechanics and DIY enthusiasts, the Engine Oil Filter Housing Cap CPL0070 is an indispensable part of routine maintenance for BMW owners focused on vehicle longevity.

Crafted from durable materials, this oil filter housing cap is engineered to withstand the demanding conditions typical of BMW engines. Its precise design guarantees an excellent fit, allowing for easy installation and straightforward replacements. Available from Turner Motorsport, this product is a reliable choice for those looking to enhance their engine’s performance.

Key Benefits:

Specifically designed for BMW vehicles to ensure compatibility and a perfect fit
Prevents oil leaks, helping maintain optimal oil pressure for engine health
Made from high-quality materials for enhanced durability and longevity
Easy installation process allows for quick maintenance and replacements
Ideal for both professional mechanics and DIY car enthusiasts
Available from Turner Motorsport, a trusted supplier of BMW parts

The Engine Oil Filter Housing Cap CPL0070 is an essential upgrade for any BMW owner aiming to protect their engine and ensure it runs smoothly.

Show More Show Less

CP Carrillo Pro-Xtreme Connecting Rod Set - BMW B58

T#:40478118

Part#: CAR-CRS-B58-XT

Back Ordered

$ 2,299.99 USD

Add to Wish List

Qty

$ 2,299.99 USD

Add to Wish List

Ensure your engine can handle the power and all the boost thrown at it with these 5150 AutoSport Pro-Xtreme connecting rods manufactured by CP Carrillo. These rods are precision-engineered for high horsepower and high RPM applications, ensuring superior durability for turbocharged builds, drag racing, or street/strip use.

Show More Show Less

Genuine BMW Gasket Ring - 11317631972

T#:34086

Part#: 11317631972

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Genuine BMW Gasket Ring - A22X27
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,I12 i8

Fits BMW Engines including:
N12,N14,N16,N18,N20,N26

Show More Show Less

Genuine BMW Torx-bolt With Washer - 07129904819

T#:28823

Part#: 07129904819

In Stock

$ 2.50 USD

Add to Wish List

Qty

$ 2.50 USD

Add to Wish List

Genuine BMW Torx-Bolt With Washer
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E53 X5 X5,E63,E65,E70 X5,E71 X6,E83 X3,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F30,F33,F80 M3,F82 M4,F83,i3

Show More Show Less

Genuine BMW Flange Nut - 07119904670

T#:27597

Part#: 07119904670

Ships in 1 Business Day

$ 3.48 USD

Add to Wish List

Qty

$ 3.48 USD

Add to Wish List

Genuine BMW Flange Nut
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E83 X3,E89 Z4,E90,E92,E93,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Show More Show Less

Genuine BMW Torx Screw - 07129902813

T#:28706

Part#: 07129902813

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Upgrade Your BMW with Genuine BMW Torx Screw - 07129902813

Upgrade your BMW's maintenance with the Genuine BMW Torx Screw - 07129902813, a premium component crafted for durability and precision. This authentic torx screw ensures a perfect fit and reliable performance in your BMW vehicle. Engineered to BMW's exact specifications, it offers peace of mind knowing your BMW is equipped with genuine parts. Whether you're conducting routine maintenance or repairing your BMW, trust Genuine BMW Torx Screws to maintain the integrity and performance of your vehicle.

Genuine BMW torx screw for superior quality
Engineered to BMW's exact specifications
Ensures a perfect fit and reliable performance
Enhances vehicle integrity and performance
Ideal for routine maintenance and repairs

Genuine BMW Torx Screw
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Genuine BMW Gasket Ring - 07119963132

T#:28583

Part#: 07119963132

In Stock

2% off MSRP $ 2.42

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.37 USD

Add to Wish List

Qty

2% off MSRP

$ 2.42

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.37 USD

Add to Wish List

Genuine BMW Gasket Ring
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,F01,F02,F10,F12,F13,F15,F80 M3,F82 M4,F83,i12

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series F30 (2012+)

Sub-Categories

Elevate Turbocharger Performance with Upgraded Kit

Key Features:

Key Benefits:

Upgrade Your BMW with Genuine BMW Torx Screw - 07129902813

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results