BMW Engine Parts for BMW 3 Series F30 (2012+)

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

Victor Reinz Valve Seal Repair Kit - Exhaust

T#:377137

Part#: 11340035853

Ships in 3 Business Days

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

Stop burning oil at start-up

Vargas Ignition Coil Kit (Black) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309609

Part#: VTT-COIL-N5X-BLK

Ships on Sep 15, 2026

$ 167.99 USD

Add to Wish List

Qty

$ 167.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

5150 AutoSport Pro-Series Turbo Build Kit - BMW N55 Stage 2

T#:31755188

Part#: 5150-TBK-N55-100

Ships in 4 Business Days

$ 6,099.99 USD

Add to Wish List

Qty

$ 6,099.99 USD

Add to Wish List

The 5150 AutoSport Pro-Series Turbo Build Kit is made for high horsepower and turbocharged performace.

ARP Head Stud Kit - BMW N55/S55

T#:23416542

Part#: ARP-HSK-S56-CA

In Stock

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

IP High Performance Ignition Coil Set - B58

T#:1637697

Part#: IP-A122613

Ships in 6 Business Days

$ 1,055.00 USD

Add to Wish List

Qty

$ 1,055.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

Performance N55 Main Bearing Set

T#:26238415

Part#: 5150-HPMBS-N55

Ships in 4 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Sep 16, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Pure Turbos N20 Stage 2 Turbo Upgrade - BMW N20 2.0L w/ EWG

For vehicles with a production date from 11/2012 For vehicles with a production date from 07/2012

For vehicles with electronic waste gate (EWG)

T#:578233

Part#: PURE-N20-0002KT

Ships in 5 Business Days

$ 2,590.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,495.00 USD

Add to Wish List

Qty

$ 2,495.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight-six produced, but Pure Turbos have been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. With Pure Turbos' Stage 2 upgrade, the BMW N20 two-liter is capable of 400whp or more with just a few additional supporting modifications!

Show More Show Less

Connecting Rod Bearing Set - Standard Size

Standard Size

T#:26638194

Part#: CR6887SV

In Stock at Vendor

$ 237.99 USD

Add to Wish List

Qty

$ 237.99 USD

Add to Wish List

Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in a full set, including 6 upper and 6 lower bearing shells, suitable for 6 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.

Show More Show Less

Rein Automotive Turbocharger Coolant Pipes CHT0903

2X Entries Into Our F80 M3 Sweepstakes

T#:34147743

Part#: 11537643094

Ships in 2 Business Days

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Turbocharger Coolant Pipes CHT0903 are high-performance components designed to efficiently manage coolant flow in turbocharged engines. Available from Turner Motorsport, these coolant pipes are specifically engineered for BMW vehicles, ensuring optimal cooling of the turbocharger system. By maintaining the right temperature, these pipes help extend the lifespan of your turbocharger while improving engine performance and efficiency.

These Turbocharger Coolant Pipes offer a perfect OEM fit for easy installation, making them ideal for both professionals and BMW enthusiasts. Crafted from durable, heat-resistant materials, they ensure long-lasting reliability and resistance to wear and tear, providing a robust solution for maintaining the performance of your vehicle’s turbocharged engine.

Key Features:

Specifically designed for turbocharged BMW engines
Perfect OEM fit for seamless installation
Efficiently manages coolant flow to the turbocharger
Enhances turbocharger performance and engine efficiency
Made from durable, heat-resistant materials
Available from Turner Motorsport, a trusted provider of high-quality BMW parts

For anyone looking to maintain or upgrade their BMW’s turbocharged engine, these Turbocharger Coolant Pipes are a crucial component that ensures optimal cooling and long-term reliability.

Show More Show Less

Engine Main Bearing Kit - 0.50mm Oversized

+0.50mm

T#:26504931

Part#: MB5784SI0.5

In Stock at Vendor

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with electronic waste gate (EWG)

T#:578281

Part#: PURE-N55-0004KT

Ships on Oct 19, 2026

$ 3,114.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,000.00 USD

Add to Wish List

Qty

$ 3,000.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $500 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with electronic waste gate (EWG)

Show More Show Less

Rocker Cover

We Price Match - Give Us A Call or Chat!

T#:38419084

Part#: 11127570292

In Stock

$ 350.99 USD

Add to Wish List

Qty

$ 350.99 USD

Add to Wish List

If your valve cover is cracked or warped, replace it with this Febi part to avoid leaks and prevent additional valvetrain damage. You will also need to purchase (2) 11367609963 self-tapping screws for proper valve cover installation.

Show More Show Less

Corteco Rubber Engine Mount - Left - F22, F23, F30, F32, F33, F36 ...

T#:556274

Part#: 22116787659

Ships in 2 Business Days

$ 180.18

This product was last offered at the strikethrough price on
08-08-2026

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

Replace your worn engine mounts

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122281

Part#: TRIPLECAPCLR1

Ships on Sep 15, 2026

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Cylinder Leak Tester

T#:5498460

Part#: 75500

Ships in 2 Business Days

$ 48.26 USD

Add to Wish List

Qty

$ 48.26 USD

Add to Wish List

Quickly pinpoint or check for combustion leaks.

N20 Stage 1 Turbocharger upgrade - New

2X Entries Into Our F80 M3 Sweepstakes

T#:28770031

Part#: VTT-N20-STG1-NEW

Ships on Sep 15, 2026

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. Replace that old worn out N20 turbocharger with the latest and greatest technology from Vargas Turbo Technologies!

Show More Show Less

Bremi Crankshaft Sensor - 13627806782

T#:27871806

Part#: 13627806782

Ships in 3 Business Days

$ 71.99

This product was last offered at the strikethrough price on
05-07-2026

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

The crankshaft position sensor tells the computer whether the timing is correct in the engine. Symptoms such as no start or extended cranking times can be a telltale sign that you need to replace your crankshaft positioning sensor that is either faulty or damaged.

Show More Show Less

CTS Turbo F-Series N55 BOSS Turbo Upgrade Kit

For vehicles with a production date of 07/2013 and an electronic wastegate only (EWG)

T#:8138615

Part#: CTS-TR-1550-82

Ships in 8 Business Days

Sale - Save 10% $ 2,599.99

This product was last offered at the strikethrough price on
08-26-2026

$ 2,339.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,599.99

This product was last offered at the strikethrough price on
08-26-2026

$ 2,339.99 USD

Add to Wish List

CTS is proud to announce the release of a premium ball-bearing turbo kit with stainless steel exhaust housing for the F2x and F3x BMW platforms equipped with N55 EWG engine. CTS utilized transient flow analysis backed by flow bench testing to optimize turbine housing for a GTX3582R while maintaining stock fitment, stock location, and using the stock waste gate (this is not a stock turbo with a bigger compressor wheel). This allows one to run any stock fitment exhaust downpipe, intake and charge pipe. The result is a factory-location big turbo that is capable of producing over 800hp with supporting mods. You can simply transfer your factory wastegate, your high performance downpipe, intake and charge pipe during the install. No custom parts are needed! Product Details: Complete brand new turbocharger; no need for core to be sent it or purchased GTX3582R-style Gen2 ceramic ball-bearing CHRA (dual ball-bearing) Billet 11 blade compressor wheel Proprietary stainless steel turbine housing, flow matched to the turbocharger VSR Balanced to exceed OE tolerances Oil and water fittings included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuator (not included, use your original wastegate actuator) **BIG TURBO SOFTWARE TUNING IS REQUIRED, FUELING UPGRADES ARE RECOMMENDED.

Show More Show Less

N20/N26 Mishimoto Baffled Oil Catch Can

T#:389788

Part#: MMBCCN20N2612CB

In Stock at Vendor

$ 278.95 USD

Add to Wish List

Qty

$ 278.95 USD

Add to Wish List

il venting and circulation continues to be a problem on BMW engines and the N20 engine is not immune from this. The existing stock system does a poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. Performance issues are caused by oil sneaking by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N20 or N26 turbo engine: 2014-2016 F2X 228i 228i xDrive 2012-2016 F3X 320i 320i xDrive 328i 328i xDrive 428i 428i xDrive WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Revshift Polyurethane Motor Mounts - 80A (black) - F2X/F3X RWD ...

T#:13957870

Part#: PMM-F3X-80A

Ships in 6 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.

Show More Show Less

MTX-D: Ethanol Content % And Fuel Temperature Gauge

T#:22558994

Part#: INN3904

In Stock at Vendor

14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Qty

14% off MSRP

$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD

Add to Wish List

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

Ethanol Content %: 0-100%
Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

Ethanol Content
Error reporting for ethanol content sensor (Digital Display)
Fuel Temperature
Customizable exterior LED display
Programmable exterior LED color options
Selectable unit of measure in °F or °C
Programmable fuel temperature warning (outer LED)
2-Configurable analog outputs
Ethanol Content: 0v = 0%, 5v = 100%
Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less

ReFlex Lite Injector Harness - Inline-6

T#:29234311

Part#: 900.1013

Ships in 5 Business Days

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 2 Business Days

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

THINKDIAG (include 1 Free Software)

T#:2302718

Part#: 301180767

Ships in 1 day

Sale - Save 32% $ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 69.59 USD

Add to Wish List

Qty

Sale - Save 32%

$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 69.59 USD

Add to Wish List

ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.

OEM Elring Valve Stem Seal Kit - Intake - N20/26 B48/46 2.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2691342

Part#: 11340038719

Ships in 2 Business Days

$ 34.99

This product was last offered at the strikethrough price on
05-07-2026

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Includes enough valve seals to do all the intake valves

Ignition Coils - Set Of Six

T#:588060

Part#: 12138643360BOKT

In Stock

$ 434.99

This product was last offered at the strikethrough price on
04-10-2026

$ 389.99 USD

Add to Wish List

Qty

$ 389.99 USD

Add to Wish List

OEM Garrett New Turbocharger - BMW F30/31 328d, F25 X3 28d N47 2.0L ...

T#:2423527

Part#: 11658514665

Back Ordered

$ 1,185.99 USD

Add to Wish List

Qty

$ 1,185.99 USD

Add to Wish List

Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace your failing turbocharger with this high-quality OEM turbo from Garrett. **Note: This is a brand new unit, not a remanufactured one. No core charge!**

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 2 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

BMW Fuel Injector Seal Pliers And Seal Installers

T#:641886

Part#: B130190KIT

Ships in 6 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Includes 130190, 130191 and 130280

Race German Inline Fuel Pressure Adapter (1/8npt)

T#:7703242

Part#: RGIFPA

Ships in 2 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Finding a way to measure your fuel pressure is not always the easiest thing to do. Race German wanted to make your life just a little easier with this in-line fuel pressure adapter. This simple solution allows you to splice into your rubber fuel feed line hose and attach a 1/8NPT pressure sender. This would be great to run a fuel pressure gauge, or give you a way to temporarily test your pressure for troubleshooting issues, either way you can't go wrong. *Does not include pressure sender.

Show More Show Less

M54/S54/N52/N54/N55 IP High Performance Ignition Coil Set

T#:1637696

Part#: IP-A122609

Ships in 4 Business Days

$ 1,055.00 USD

Add to Wish List

Qty

$ 1,055.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

Engine Main Bearing Kit - Std. Size

Std. Size

T#:26504942

Part#: MB7779SM

In Stock at Vendor

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

IP High Performance Ignition Coil Set - N20

T#:1637692

Part#: IP-A122409

Ships in 6 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

Hella Air Horn Kit

T#:592708

Part#: 3001651

Ships in 2 Business Days

$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

Get noticed with this air horn kit from Hella!

Rubber Engine Mount - Right

T#:594936

Part#: 22116855460

Ships in 2 Business Days

$ 189.13

This product was last offered at the strikethrough price on
05-04-2026

$ 161.99 USD

Add to Wish List

Qty

$ 161.99 USD

Add to Wish List

Excessive driveline vibration is cause by one of a few things, but more than likely, it is the mounts in your vehicle. They keep your engine and transmission secure for more positive shifting and driveline triangulation as well as absorbing vibration. If any of these are occuring in your BMW, it's time to examine your mounts.

Show More Show Less

Deluxe Compression Tester

T#:585065

Part#: OTC5605

Ships in 7 Business Days

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The only way to check compression is with a compression tester like this one.

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

VTT B58 GC Turbocharger Upgrade W/ 4" Connector and Install Kit ...

2X Entries Into Our F80 M3 Sweepstakes

T#:3872390

Part#: VTTB58GC/GC+TURB

Ships on Sep 15, 2026

$ 2,094.99 USD

Add to Wish List

Qty

$ 2,094.99 USD

Add to Wish List

Elevate your BMW B58 engine to new heights with the VTT B58 "GC" Turbocharger Upgrade. Say goodbye to core charges, long lead times, and restrictive factory housings. VTT's 100% new casting B58 GC and GC+ turbocharger upgrades retain the factory B58 turbo's great design elements while addressing shortcomings like the small inlet area and bearing housing. The result is a turbocharger upgrade supporting over 600WHP, maintaining factory spool, and utilizing all factory connections. Experience serious B58 power effortlessly with the VTT GC Turbo Upgrade.

100% new casting for OE quality
Supports over 600WHP
Retains factory spool and connections
Improved design elements for enhanced performance
Easy drop-in B58 turbocharger upgrade
Includes 4' Aluminum Connector & Install Kit

Show More Show Less

Rein Timing Chain Rebuild Kit - CKP0249 SELECT PLUS for N20 Engine ...

2X Entries Into Our F80 M3 Sweepstakes

T#:34214776

Part#: 11318648732KT4

Ships in 4 Business Days

$ 1,367.99 USD

Add to Wish List

Qty

$ 1,367.99 USD

Add to Wish List

Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS is a top-tier solution for BMW owners looking to enhance the performance and longevity of their engine. Available from Turner Motorsport, this premium rebuild kit is specifically engineered to address common issues such as timing chain stretch and wear, which can lead to serious engine damage if left unattended. Designed for BMW N20 engines, this comprehensive kit ensures that all critical timing components are replaced with high-quality, durable parts that meet or exceed OEM standards.

The Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS includes everything needed to restore your engine’s optimal performance, from the timing chain itself to tensioners and guides. Whether you're a BMW enthusiast or a professional mechanic, this kit provides a reliable and efficient solution for ensuring long-term engine health.

Specifically designed for BMW N20 engines prone to timing chain issues
Complete rebuild kit includes timing chain, tensioner, guides, and other essential components
Helps prevent costly engine damage due to worn or stretched timing chains
Made from high-quality materials for lasting performance and durability
Meets or exceeds OEM specifications for precise fitment and reliability
Ideal for BMW engine maintenance or rebuild projects

For BMW owners seeking a trusted, all-inclusive solution for maintaining engine performance, the Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS from Turner Motorsport is the perfect choice.

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

Ships in 1 Business Day

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

T#:587528

Part#: BM-ICP019-T3

Ships on Sep 17, 2026

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.

Show More Show Less

Rubber Engine Mount - Right

2X Entries Into Our F80 M3 Sweepstakes

T#:641884

Part#: 22116855460

Ships in 2 Business Days

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

aFe Pro GUARD D2 Oil Filter 4 Pack - N54/55 BMW Engine

T#:557623

Part#: 44-LF029-MB

Ships in 4 Business Days

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

Snow Performance Boost Tap - N20, N55

T#:589559

Part#: SNO-40200

Ships in 4 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Installs easily for an accurate boost reading every time.

Bosch Diesel Fuel Injector - F30, F31

T#:1196203

Part#: 13538506548

In Stock at Vendor

$ 876.99

This product was last offered at the strikethrough price on
05-07-2026

$ 640.99 USD

Add to Wish List

Qty

$ 640.99 USD

Add to Wish List

Quality aftermarket fuel injector!

BOSCH High-Pressure Fuel Pump - N20 N26 2.0L

T#:639092

Part#: 13517584461

In Stock

$ 459.99

This product was last offered at the strikethrough price on
05-07-2026

$ 406.99 USD

Add to Wish List

Qty

$ 406.99 USD

Add to Wish List

This is the high-pressure fuel pump for BMW's with the N20 turbo engine. Bosch High-Pressure Pump - This item fits the following BMW Chassis: E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26

Show More Show Less

BMW F30 N47 2.0L Crankshaft Pulley (Vibration Damper)

T#:594954

Part#: 11238512072

Ships in 3 Business Days

$ 310.23 USD

Add to Wish List

Qty

$ 310.23 USD

Add to Wish List

BMW F30 N47 2.0L Crankshaft Pulley (Vibration Damper) is a high-quality replacement component from Corteco, designed to ensure smooth engine operation and minimize vibration. Turner Motorsport offers this vibration damper as a perfect fit for various BMW chassis, including the F25 X3, F30, and F31 models. This crankshaft pulley helps maintain engine balance and reduces wear on other engine components by absorbing vibrations. Ideal for maintaining performance and reliability, this part is a crucial upgrade or replacement for your BMW.

Reduces engine vibration: Effectively dampens vibrations to protect engine components.
High-quality construction: Manufactured by Corteco for reliability and durability.
Improves engine performance: Ensures smooth operation and reduced wear.
Exact fit: Compatible with BMW F25 X3, F30, and F31 chassis.
Easy installation: Designed for straightforward replacement with no modifications required.

Show More Show Less

Oil Filter Housing And Heat Exchanger - B46, B48

2X Entries Into Our F80 M3 Sweepstakes

T#:2438649

Part#: 11428596283

In Stock

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

OE Cross References: 11428585624 11428596283

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series F30 (2012+)

Sub-Categories

Key Features:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results