BMW Suspension Parts for BMW 3 Series F31 (2014+)

Koni suspension has taken their long running FSD (Frequency Selective Dampening) Technology and improved upon it to create their new Special Active suspension package. Improving handling while also improving the comfort of your BMW's ride, Special Active shocks and struts prove they are a top contender in the replacement suspension market.

Koni's Special Active dampers adapt to the continuous imperfect road conditions in order to provide you with a more responsive and smoother ride. Thanks to multiple generations of suspension expertise, these shocks and struts rival expensive ride control systems of newer vehicles but at a cost that is significantly lower and a capability to be retrofitted into existing vehicles.

Designed by Koni for the vehicle's original stock ride height, these are not intended to be used with lowering springs and will perform best when paired with stock springs.

Koni Special Active Features:

• KONI’s latest generation of Frequency Selective Damping Technology
•  Improves safety and road holding
•  Technology proven on over 1.5 million factory equipped vehicles
•  Secure and stable feeling for spirited driving
•  Unrivaled aftermarket solution can be fitted to most new and older cars
•  Driving refinement for cars, trucks, SUVs, etc.
•  Technology that rivals expensive Original Equipment electronic systems
•  Performance for driver and comfort for passengers in one

Activate your Koni Rebate!

Fits the following BMWs:
2011-2018 F30 BMW RWD with M Sport suspension
2011-2018 F32/6 BMW RWD with M Sport suspension
2014-2018 F22 BMW with M Sport suspension

BMW F30 Adjustable Rear Camber Front Upper Arms Performance provide a superior solution for optimizing alignment on lowered vehicles. Unlike factory camber adjustment, which uses eccentric bolts allowing for minimal adjustment, these performance upper arms from Turner Motorsport offer extensive adjustability to achieve ideal alignment settings.

• Enhanced Adjustability: Allows for precise camber adjustments beyond the limitations of factory eccentric bolts, ideal for performance and handling improvements.
• High-Strength Steel Alloys: Constructed from durable yet lightweight materials for increased strength and longevity.
• Track-Tested Performance: Rigorously tested in road racing, autocross, and drifting to ensure reliability and effectiveness.
• Perfect for Lowered Vehicles: Addresses alignment issues commonly found in lowered cars, providing better handling and tire wear.

Upgrade your BMW F30 with Turner Motorsport's Adjustable Rear Camber Front Upper Arms for enhanced performance and alignment precision.

Modern BMW's are beginning to leave the performance derived handling and power delivery in the past as the demand for more comfort and features rises. The stiff suspension components designed around having the best driving experience from a luxury car has been left for the M models and replaced with soft rubber bushings and mounts. Unfortunately, this is a good move by BMW to support the masses.

The obvious approach was to offer products so the modern BMW can be upgraded into the car the enthusiast desires, superb handling, control, and a direct delivery of power to the rear wheels. When you upgrade to our Delrin subframe mounts you reconnect that power with almost zero negative feedback.

The added appeal to someone looking to take one of these machines on the race track is Delrin can be used when solid mounts are needed and aluminum is not an option with strict regulations found in??Grand-Am, BMW CCA, and other racing series.

Product features:

• Precision machined Delrin(TM) 150 bushings.
• Precision machined 6061-T6 aluminum inserts.?
• Class legal for any racing class that does not allow a solid subframe bushing.?

Performance Benefits:

• Eliminates subframe movement for more direct throttle and suspension? response.?
• Minimizes wheel hop due to subframe deflection and movement.?

?

***Installation Instructions***

These GAC differential bushings/mounts fit the following BMWs:?
2014+?F22 BMW?228i 228iX M235i M235iX?
2012+?F30 BMW?320i 320iX 328i 328iX 335i 335iX - Sedan?
2014+?F34 BMW?328i 328iX 335iX - Gran Turismo?
2014+?F32 BMW?428i 428iX 435i 435iX - Coupe?
2014+?F33 BMW?428i 428iX 435i 435iX - Convertible

2014+?F36?BMW?428iX -Gran Coupe?

Positioned between the strut mount and spring pad, the bump stop provides crucial support for your vehicle's shock absorber. Its primary role is to prevent the strut from over-compressing when encountering significant bumps or rough terrain, which could otherwise lead to damage to the strut and other suspension components.

Constructed from a soft rubber material, bump stops are designed for maximum impact absorption. However, they are susceptible to dry-rotting and general wear over time. ECS recommends replacing bump stops whenever the spring strut is disassembled for maintenance or replacement.

When replacing your control arms, it's essential to pair them with fresh hardware to ensure a secure and reliable fit. This kit provides all the necessary hardware for the lower control arms on your vehicle, offering peace of mind and optimal performance.

Kit Contents:

(2) Combination Nuts – Part #33306787062 (2) Hex Screws with Collar – Part #31106797237 (2) Self-Locking Nuts – Part #33326760668

Collar Nut | Self-Locking is a vital component used in various suspension locations on BMW and MINI vehicles. This 8mm hex nut provides reliable performance and secure fastening for suspension systems.

• Self-Locking Feature: Ensures that the nut remains securely fastened under vibration and stress.
• Durable Construction: Designed to withstand the demands of automotive suspension systems.
• Versatile Use: Suitable for various locations in the suspension system of BMW and MINI vehicles.
• Precision Fit: 8mm hex size for accurate and easy installation.

Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.