BMW Engine Parts for BMW 3 Series F31 (2014+)

Fuel Pump Lock Ring Tool

T#:641918

Part#: 161190

Ships in 5 Business Days

$ 127.68 USD

Add to Wish List

Qty

$ 127.68 USD

Add to Wish List

Don't damage your lock ring, do it correctly with this tool

N20/N26 Mishimoto Baffled Oil Catch Can

T#:389788

Part#: MMBCCN20N2612CB

In Stock at Vendor

$ 278.95 USD

Add to Wish List

Qty

$ 278.95 USD

Add to Wish List

il venting and circulation continues to be a problem on BMW engines and the N20 engine is not immune from this. The existing stock system does a poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. Performance issues are caused by oil sneaking by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N20 or N26 turbo engine: 2014-2016 F2X 228i 228i xDrive 2012-2016 F3X 320i 320i xDrive 328i 328i xDrive 428i 428i xDrive WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

OEM Garrett New Turbocharger - BMW F30/31 328d, F25 X3 28d N47 2.0L ...

T#:2423527

Part#: 11658514665

Back Ordered

$ 1,185.99 USD

Add to Wish List

Qty

$ 1,185.99 USD

Add to Wish List

Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace your failing turbocharger with this high-quality OEM turbo from Garrett. **Note: This is a brand new unit, not a remanufactured one. No core charge!**

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Ignition Coils - Set Of Six

T#:588060

Part#: 12138643360BOKT

In Stock

$ 434.99

This product was last offered at the strikethrough price on
04-10-2026

$ 389.99 USD

Add to Wish List

Qty

$ 389.99 USD

Add to Wish List

Cylinder Leak Tester

T#:5498460

Part#: 75500

Ships in 1 Business Day

$ 48.26 USD

Add to Wish List

Qty

$ 48.26 USD

Add to Wish List

Quickly pinpoint or check for combustion leaks.

Valve Cover Gasket Set

2X Entries Into Our F80 M3 Sweepstakes

T#:638478

Part#: 11127588418

Ships in 1 Business Day

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

OEM Elring Cylinder Head Gasket (+0.3mm) - N20/26 2.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:2691314

Part#: 11128676514

Ships in 1 Business Day

$ 149.99

This product was last offered at the strikethrough price on
05-07-2026

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Symptoms of a necessary head gasket replacement may include: oil and coolant mixture found in your engine (also referred to as "milkshake"), misfires from a cylinder losing compression, or just if the cylinder head is removed from the vehicle. This multi-layer steel head gasket has raised printed seals, for improved sealing of fluid passages. Purchase head bolts and related attachment hardware and gaskets separately.

Show More Show Less

N20 Stage 1 Turbocharger upgrade - New

2X Entries Into Our F80 M3 Sweepstakes

T#:28770031

Part#: VTT-N20-STG1-NEW

Ships in 10 Business Days

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. Replace that old worn out N20 turbocharger with the latest and greatest technology from Vargas Turbo Technologies!

Show More Show Less

URO Fuel Tank Breather Valve - BMW E84 F22/23 F3X N20 2.0L

For models with a manual transmission only

2X Entries Into Our F80 M3 Sweepstakes

T#:39768336

Part#: 13907636141

Ships in 1 Business Day

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Allows fuel tank vapors to be vented, preventing excess pressure build-up.

Engine Main Bearing Kit - 0.50mm Oversized

+0.50mm

T#:26504931

Part#: MB5784SI0.5

In Stock at Vendor

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

3 Arm Engine Cylinder Hone - 8"

T#:641408

Part#: 2833D

Ships in 6 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Hone and remove glaze from engine cylinders from 3/4" to 4" and 19mm to 101mm in diameter

CTA Fuel Injector Tool Kit - N20, N54, N55

T#:584132

Part#: CTA7644

Ships in 5 Business Days

$ 294.23 USD

Add to Wish List

Qty

$ 294.23 USD

Add to Wish List

The CTA Fuel Injector Tool kit is designed to remove and install your fuel injectors. 130 180, 130 270, 130 320, 2249 115

Designed to service the following BMW platforms:

N20, N47, N54, N55, N57 and N63

Show More Show Less

Revshift Polyurethane Motor Mounts F2X/F3X RWD 80A (Black)

T#:13957875

Part#: PMM-F3X4C-80A

Ships in 10 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.

Show More Show Less

BMW F30 N47 2.0L Crankshaft Pulley (Vibration Damper)

T#:594954

Part#: 11238512072

Ships in 2 Business Days

$ 310.23 USD

Add to Wish List

Qty

$ 310.23 USD

Add to Wish List

BMW F30 N47 2.0L Crankshaft Pulley (Vibration Damper) is a high-quality replacement component from Corteco, designed to ensure smooth engine operation and minimize vibration. Turner Motorsport offers this vibration damper as a perfect fit for various BMW chassis, including the F25 X3, F30, and F31 models. This crankshaft pulley helps maintain engine balance and reduces wear on other engine components by absorbing vibrations. Ideal for maintaining performance and reliability, this part is a crucial upgrade or replacement for your BMW.

Reduces engine vibration: Effectively dampens vibrations to protect engine components.
High-quality construction: Manufactured by Corteco for reliability and durability.
Improves engine performance: Ensures smooth operation and reduced wear.
Exact fit: Compatible with BMW F25 X3, F30, and F31 chassis.
Easy installation: Designed for straightforward replacement with no modifications required.

Show More Show Less

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

T#:587528

Part#: BM-ICP019-T3

Ships on Sep 16, 2026

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.

Show More Show Less

Rein Oil Pan Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:17738376

Part#: 11137618512

Ships in 3 Business Days

$ 181.99 USD

Add to Wish List

Qty

$ 181.99 USD

Add to Wish List

This OE quality kit includes the engine oil pan and gasket.

Motiv ReFlex+

T#:29101668

Part#: 910.1001

Ships in 4 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

Hella Air Horn Kit

T#:592708

Part#: 3001651

Ships in 1 Business Day

$ 143.99

This product was last offered at the strikethrough price on
05-07-2026

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

Get noticed with this air horn kit from Hella!

Engine Mount - Right

2X Entries Into Our F80 M3 Sweepstakes

T#:637571

Part#: 22116855456

Ships in 1 Business Day

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

OEM Elring Valve Stem Seal Kit - Intake - N20/26 B48/46 2.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:2691342

Part#: 11340038719

Ships in 1 Business Day

$ 34.99

This product was last offered at the strikethrough price on
05-07-2026

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Includes enough valve seals to do all the intake valves

CTS Turbo Front Mount Race Intercooler Kit - F2X/F3X N20/N55 ...

T#:5802147

Part#: CTS-F20-F30-RACE

Ships in 7 Business Days

Sale - Save 25% $ 599.99

This product was last offered at the strikethrough price on
08-26-2026

$ 449.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 599.99

This product was last offered at the strikethrough price on
08-26-2026

$ 449.99 USD

Add to Wish List

CTS Turbo is proud to announce their performance intercooler for N20 and N55 powered BMWs. This unique stepped-core design allows for maximum surface area, which optimizes cooling efficiency. Featuring a high-density core and cast aluminum end tanks, this intercooler is just what you need to keep your engine happy and add more power. If you’re interested in maintaining the sleeper look, rest assured this kit is a snap to install and no bumper trimming is required at all. Core size: 21.5' long x 3'/6' thick x 11'/6' tall, HP rating up to 800hp+

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Bosch Diesel Fuel Injector - F30, F31

T#:1196203

Part#: 13538506548

In Stock at Vendor

$ 876.99

This product was last offered at the strikethrough price on
05-07-2026

$ 640.99 USD

Add to Wish List

Qty

$ 640.99 USD

Add to Wish List

Quality aftermarket fuel injector!

POR15 Absolute Coatings Fuel Tank Sealer

T#:1575841

Part#: POR49216

Ships in 6 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Pure Turbos N20 Pure400 Turbo Upgrade - BMW N20 2.0L (w/ EWG) ...

T#:56038081

Part#: N20P400EWG

Ships in 4 Business Days

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

Stop letting your N20's factory turbo strangle your lap times and choke out your top-end speed. The Pure Turbos Pure400 EWG upgrade is the track-proven weapon your four-cylinder BMW has been begging for. This isn't a simple rebuilt unit, it is a brand-new aftermarket housing packed with performance internals designed to take a beating and keep delivering. Featuring a custom billet compressor wheel, a high-flow turbine wheel for rapid exhaust scavenging, and an upgraded CHRA that is VSR-balanced to perfection, the Pure400 is built for those who push their cars to the limit. It drops right into place, replacing your stock turbocharger, and provides a reliable 300+ wheel horsepower, with supporting modifications.

Show More Show Less

Corteco Engine Mount - Left - F30, F31

T#:556361

Part#: 22116787657

In Stock

$ 91.39

This product was last offered at the strikethrough price on
08-04-2026

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Reduce driveline vibrations with a new motor mount

BOSCH High-Pressure Fuel Pump - N20 N26 2.0L

T#:639092

Part#: 13517584461

In Stock

$ 459.99

This product was last offered at the strikethrough price on
05-07-2026

$ 406.99 USD

Add to Wish List

Qty

$ 406.99 USD

Add to Wish List

This is the high-pressure fuel pump for BMW's with the N20 turbo engine. Bosch High-Pressure Pump - This item fits the following BMW Chassis: E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26

Show More Show Less

Bosch Alternator - 210 amp - Remanufactured - $125 refundable core ch...

T#:580223

Part#: AL9449X

Ships in 1 Business Day

$ 575.99 USD

Add to Wish List

Qty

$ 575.99 USD

Add to Wish List

Elring Head gasket

2X Entries Into Our F80 M3 Sweepstakes

T#:596421

Part#: 11128676519

Ships in 2 Business Days

$ 141.99

This product was last offered at the strikethrough price on
05-04-2026

$ 123.99 USD

Add to Wish List

Qty

$ 123.99 USD

Add to Wish List

.70mm

BMW Rod Bolt Stretch Gauge with Billet Body & Thumb Hold

T#:4309

Part#: 100-9942

In Stock at Vendor

$ 216.99

This product was last offered at the strikethrough price on
03-05-2026

$ 202.99 USD

Add to Wish List

Qty

$ 202.99 USD

Add to Wish List

We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.

Rein Automotive Turbocharger Coolant Pipes CHT0903

2X Entries Into Our F80 M3 Sweepstakes

T#:34147743

Part#: 11537643094

Ships in 1 Business Day

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Turbocharger Coolant Pipes CHT0903 are high-performance components designed to efficiently manage coolant flow in turbocharged engines. Available from Turner Motorsport, these coolant pipes are specifically engineered for BMW vehicles, ensuring optimal cooling of the turbocharger system. By maintaining the right temperature, these pipes help extend the lifespan of your turbocharger while improving engine performance and efficiency.

These Turbocharger Coolant Pipes offer a perfect OEM fit for easy installation, making them ideal for both professionals and BMW enthusiasts. Crafted from durable, heat-resistant materials, they ensure long-lasting reliability and resistance to wear and tear, providing a robust solution for maintaining the performance of your vehicle’s turbocharged engine.

Key Features:

Specifically designed for turbocharged BMW engines
Perfect OEM fit for seamless installation
Efficiently manages coolant flow to the turbocharger
Enhances turbocharger performance and engine efficiency
Made from durable, heat-resistant materials
Available from Turner Motorsport, a trusted provider of high-quality BMW parts

For anyone looking to maintain or upgrade their BMW’s turbocharged engine, these Turbocharger Coolant Pipes are a crucial component that ensures optimal cooling and long-term reliability.

Show More Show Less

Rein Timing Chain Rebuild Kit - CKP0250 SELECT PLUS

2X Entries Into Our F80 M3 Sweepstakes

T#:34214779

Part#: 11318648732KT5

Ships in 3 Business Days

$ 1,205.99

This product was last offered at the strikethrough price on
04-28-2026

$ 1,156.99 USD

Add to Wish List

Qty

$ 1,156.99 USD

Add to Wish List

Rein Timing Chain Rebuild Kit - CKP0250 is a top-quality solution for BMW owners looking to maintain or restore the performance of their engine. Specifically designed for BMW models, this rebuild kit addresses common timing chain issues such as stretching and wear, which can lead to serious engine damage if not attended to. Available from Turner Motorsport, this kit provides all the necessary components for a complete timing chain replacement, ensuring your BMW continues to run smoothly and reliably.

The Rein Timing Chain Rebuild Kit - CKP0250 includes high-quality, durable parts that meet or exceed OEM standards. Whether you're a professional mechanic or a DIY enthusiast, this kit offers a comprehensive solution to ensure your engine’s long-term health and performance.

Specifically designed for BMW engines prone to timing chain issues
Complete rebuild kit includes timing chain, tensioner, and guides
Prevents costly engine damage due to worn or stretched timing chains
Made from high-quality materials for long-lasting durability
Meets or exceeds OEM specifications for reliable fitment and performance
Ideal for BMW maintenance, repairs, or engine rebuild projects

For BMW owners looking for a reliable, all-in-one solution, the Rein Timing Chain Rebuild Kit - CKP0250 from Turner Motorsport ensures your engine stays in optimal condition.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Conti Tech Rubber High-Pressure Hose

We Price Match - Give Us A Call or Chat!

T#:378830

Part#: N0202811

Ships in 3 Business Days

$ 34.22 USD

Add to Wish List

Qty

$ 34.22 USD

Add to Wish List

7mm O.D X 2.5mm I.D.

IP High Performance Ignition Coil Set - N20

T#:1637692

Part#: IP-A122409

Ships in 5 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

Piston Ring Comp 2-1/8" to 5"

T#:2242222

Part#: W80572

Ships in 1 Business Day

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

IP High Performance Ignition Coil Set - B48

T#:1637693

Part#: IP-A122413

Ships in 5 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

Snow Performance Boost Tap - N20, N55

T#:589559

Part#: SNO-40200

Ships in 1 Business Day

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Installs easily for an accurate boost reading every time.

Pure Turbos N20 Stage 2 Turbo Upgrade - BMW N20 2.0L w/ EWG

For vehicles with electronic waste gate (EWG)

T#:578233

Part#: PURE-N20-0002KT

Ships in 4 Business Days

$ 2,590.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,495.00 USD

Add to Wish List

Qty

$ 2,495.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight-six produced, but Pure Turbos have been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. With Pure Turbos' Stage 2 upgrade, the BMW N20 two-liter is capable of 400whp or more with just a few additional supporting modifications!

Show More Show Less

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Rein Timing Chain Rebuild Kit - CKP0249 SELECT PLUS for N20 Engine ...

2X Entries Into Our F80 M3 Sweepstakes

T#:34214776

Part#: 11318648732KT4

Ships in 3 Business Days

$ 1,367.99 USD

Add to Wish List

Qty

$ 1,367.99 USD

Add to Wish List

Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS is a top-tier solution for BMW owners looking to enhance the performance and longevity of their engine. Available from Turner Motorsport, this premium rebuild kit is specifically engineered to address common issues such as timing chain stretch and wear, which can lead to serious engine damage if left unattended. Designed for BMW N20 engines, this comprehensive kit ensures that all critical timing components are replaced with high-quality, durable parts that meet or exceed OEM standards.

The Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS includes everything needed to restore your engine’s optimal performance, from the timing chain itself to tensioners and guides. Whether you're a BMW enthusiast or a professional mechanic, this kit provides a reliable and efficient solution for ensuring long-term engine health.

Specifically designed for BMW N20 engines prone to timing chain issues
Complete rebuild kit includes timing chain, tensioner, guides, and other essential components
Helps prevent costly engine damage due to worn or stretched timing chains
Made from high-quality materials for lasting performance and durability
Meets or exceeds OEM specifications for precise fitment and reliability
Ideal for BMW engine maintenance or rebuild projects

For BMW owners seeking a trusted, all-inclusive solution for maintaining engine performance, the Timing Chain Rebuild Kit N20 Engine - CKP0249 SELECT PLUS from Turner Motorsport is the perfect choice.

Show More Show Less

Bremi Crankshaft Sensor - 13627806782

T#:27871806

Part#: 13627806782

Ships in 2 Business Days

$ 71.99

This product was last offered at the strikethrough price on
05-07-2026

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

The crankshaft position sensor tells the computer whether the timing is correct in the engine. Symptoms such as no start or extended cranking times can be a telltale sign that you need to replace your crankshaft positioning sensor that is either faulty or damaged.

Show More Show Less

BMW Head Gasket Set

2X Entries Into Our F80 M3 Sweepstakes

T#:15081522

Part#: 11128654272

Ships in 1 Business Day

$ 129.99

This product was last offered at the strikethrough price on
05-07-2026

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

This top engine kit includes most of the major seals and gaskets associated with cylinder head removal and replacement. Replacing worn gaskets and seals any time the components are removed is important to engine longevity. Leaks from using old seals can cause major engine damage. Don't take a chance, pick up this kit and keep your engine leak free.

Show More Show Less