BMW Suspension Parts for BMW 4 Series F33 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:
Adjustable Rear Upper/Inner Camber Bushings
Adjustable Rear Upper/Inner Camber Bushings
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Ships on Aug 6, 2026
$ 320.00 USD
Free Shipping
Add to Wish List
$ 320.00 USD
Free Shipping
Add to Wish List
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less
Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X
Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:16474811
Part#: 193926-9G
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 320.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - F22 F30 F32
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - F22...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:389642
Part#: 192616-2N
Special Order: No Guaranteed ETA
$ 695.00 USD
Free Shipping
Add to Wish List
$ 695.00 USD
Free Shipping
Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Upper spring perch: OEM-size, 60mm, and 2.5" included
Bearings: urethane OEM-type center bushing; lubricated radial thrust bearing on spring perch

KMAC camber/caster plates use a patented adjustment method designed for easy and rapid alignment adjustments. The KMAC design has a 'floating' inner camber plate, rather than slotted, to allow camber and caster to be adjusted together. To adjust, simply loosen the top three nuts on the strut tower and position the KMAC mount to match your desired alignment settings. The KMAC design allows more camber and caster adjustment because separate caster hardware is eliminated. While primarily designed to increase negative camber for track use these can also be used to fix alignment issues that cause uneven tire wear or unwanted handling behavior.

KMAC camber kits are the most complete kits on the market, with all of the common spring perch options and strut hardware included. The OEM size spring perch as well as 60mm and 2.5" spring isolators are included which makes it easy to upgrade from stock struts to coil overs without having to buy new camber plates. Or swap springs on your coil overs between 60mm and 2.5" without buying additional upper perches. Also included are the most common strut pin hardware - 14mm lower bearing adapters and 12x1.5, 12x1.75, and 14x1.5 top nuts. This takes the guesswork out of ordering the correct hardware for your strut type. The urethane main bushing is also replaceable and the camber plate parts are made from 7075-grade aluminum for a lifetime of camber plate use.

Fitment Note 1: replaces factory BMW strut mount with 3 mounting bolts (up to 12/2014 prodution). Not for cars with 5-bolt strut mounts.

Fitment Note 2: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-MAC includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. Basic instructions are included but professional installation is required. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
-12/2014  F22 BMW  228i 228i xDrive M235i M235i xDrive
2012-12/2014  F30 BMW  320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013-12/2014  F31 BMW  328i xDrive 328d xDrive - Wagon
-12/2014  F34 BMW  328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013-12/2014  F32 BMW  428i 428i xDrive 435i 435i xDrive - Coupe
2013-12/2014  F33 BMW  428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
-12/2014  F36 BMW  428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
Not for cars with Adaptive M Suspension option code S2VFA
Show More Show Less
Adjustable Front Camber Bushings - F2X & F3X
Adjustable Front Camber Bushings - F2X & F3X
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:404062
Part#: 193616-8H
Special Order: No Guaranteed ETA
$ 320.00 USD
Free Shipping
Add to Wish List
$ 320.00 USD
Free Shipping
Add to Wish List

Upgrade your BMW's suspension system with K-MAC's innovative Camber/Caster Plates and Bushing Kits.

Combat increased tire wear and frequent replacements caused by limited adjustability with these patented solutions. For over forty years, K-MAC has been pioneering fully-adjustable suspension components, allowing for precise camber adjustments and toe angle corrections, resulting in a true "full four-wheel alignment."

  • Patented camber/caster plates and bushing kits for precise alignment
  • Allows easy adjustment for a full four-wheel alignment
  • Bolt-on installation with insertion/extraction tube included
  • Easily adjusted on the car with basic hand tools
  • Unique failsafe locking hardware ensures settings remain secure
  • High-quality elastomer compound resists binding for longevity
  • Hardened & nickel-chrome plated centers for maximum bushing life
  • Spiral grease grooves for improved lubrication
Show More Show Less
Eibach Performance 28mm Front & 16mm Rear Sway Bar Kit - F30 335i, F32/33 435i
Eibach Performance 28mm Front & 16mm Rear Sway Bar Kit - F30 335i, F3...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Eibach - Corporate Logo
T#:558811
Part#: E40-20-031-01-11
Back Ordered
$ 550.00 USD
Add to Wish List
$ 550.00 USD
Add to Wish List

After shocks and springs, sway bars make the biggest change in handling. Larger swaybars will reduce bodyroll and understeer. The car will corner flatter with the tire in better contact with the pavement. New urethane bushings are included.

This is a set of front 28mm and rear 16mm sway bars that are larger than the factory sway bars.

Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping