BMW Engine Parts for BMW 4 Series F33 (2014+)

Vargas Extended M7 Port Head Studs - Pair - BMW B58/N54/N55/S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672701

Part#: VTT-EXTENDED-STU

Ships in 10 Business Days

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

2X Entries Into Our F80 M3 Sweepstakes

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships in 10 Business Days

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Engine Oil Cooler Gasket

T#:57580054

Part#: 11428637821G

Ships in 3 Business Days

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Keep your engine bay clean and prevent oil loss with an aftermarket oil filter housing gasket from Meistersatz.

Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT,...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094592

Part#: VTT-FAB-063

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.

VTT B58 Cylinder Head Port Check Valve Kit - B58 Gen1/2/3 (B58/B58TU/...

2X Entries Into Our F80 M3 Sweepstakes

T#:49822558

Part#: VTTB58CHECK

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.

Show More Show Less

Kelford Camshaft Set - Gen 1.5 B58

T#:25938633

Part#: KEL-B58-GEN1.5

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen1.5 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 1.5 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen1.5 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 1.5 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen1.5 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 1.5 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

Hitachi Ignition Coil - BMW N20 N26 N55 (up to 05/2013)

For models with a production date up to 05/2013

T#:48815460

Part#: 12137594596

Ships in 6 Business Days

$ 56.99 USD

Add to Wish List

Qty

$ 56.99 USD

Add to Wish List

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil, the spark plug is not burning the air/fuel mixture properly, and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code, but not always a check engine light. A misfire code may be related to an ignition coil, but could be from other things as well. Sometimes, a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

Show More Show Less

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

For vehicles with Electronic Waste Gate

2X Entries Into Our F80 M3 Sweepstakes

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

Hitachi Crankshaft Sensor - BMW B46 B48 B58

T#:48850081

Part#: 13627806782

Ships in 6 Business Days

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Tells the computer whether the timing is correct in the engine.

Vargas Plug & Play Pre And Post Throttle MAP Sensor Kit - 6B 4W - BMW...

2X Entries Into Our F80 M3 Sweepstakes

T#:52129729

Part#: VTT56BSENSKIT64

Ships in 10 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The VTT 6-Bar MAP sensor kit provides the necessary overhead to monitor boost levels with a linear voltage scale that makes software calibration straightforward.

Ferrea High Performance Valve Kit - B58

T#:29035337

Part#: FER-HPVK-B58-T29

Ships in 3 Business Days

$ 929.00 USD

Add to Wish List

Qty

$ 929.00 USD

Add to Wish List

The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.

Show More Show Less

Crankshaft Seal

T#:57580045

Part#: 11118618864

Ships in 3 Business Days

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

This high-quality component from Meistersatz is built to match strict factory tolerances, giving enthusiast drivers a reliable solution for precision repair.

Vargas "Spine Lock" Crank Hub - BMW N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:51918887

Part#: VTT-NS55CHO

Ships in 10 Business Days

$ 819.99 USD

Add to Wish List

Qty

$ 819.99 USD

Add to Wish List

The Vargas Spline Lock Crank Hub is the solution for BMW owners seeking to push their N55 or S55 engines to the limit without the fear of catastrophic timing failure.

Coolant Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:57616350

Part#: 11537643177

Ships in 3 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Maintain maximum thermal efficiency on the track or the street with this precision-engineered turbocharger coolant line by Rein.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

2X Entries Into Our F80 M3 Sweepstakes

T#:52129710

Part#: VTT-FAB-081

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.

JE Pistons BMW N55B30 84mm Bore 9.5:1 Compression Ratio -14.7 Dish FS...

T#:590161

Part#: 338096

In Stock at Vendor

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" CARR Bolts...

T#:50521388

Part#: SCR13034-6

In Stock at Vendor

$ 2,189.99 USD

Add to Wish List

Qty

$ 2,189.99 USD

Add to Wish List

CP Carrillo's PRO-H connecting rods offer exceptional strength and durability for use in high-performance racing engines, capable of withstanding extreme, abusive forces. These rods are made from a proprietary alloy called Carrilloy and utilize an H-beam design for lower weight without compromising strength. This connecting rod set also includes CARR bolts, a multi-phase bolt rated to 285 KSI, which are good for unlimited torque cycles if not overstretched or overheated.

Show More Show Less

Dorch Engineering EWG N55 38% Lift Kit – HPFP Upgrade - with $400 c...

T#:55569519

Part#: DE-LK-1038-EWGKT

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Dorch Engineering Lift Kit HPFP Upgrade is engineered to completely eradicate direct-injection fueling limitations, providing up to 38% more flow volume on top of your existing Dorch fuel pump setup.

Show More Show Less

Vargas Ignition Coil Kit (Blue) - B58/B48/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5309599

Part#: VTT-COIL-B58-BLU

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Oil Drain Plug Repair Add On kit

T#:5175729

Part#: AGA-ODP-14-16-K

Ships in 7 Business Days

$ 446.99 USD

Add to Wish List

Qty

$ 446.99 USD

Add to Wish List

Don't let a cross threaded drainplug ruin your day!

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

5150 AutoSport & Cat Cams Camshaft Set - 278* / 272* - 11.20mm / 10.3...

T#:39126861

Part#: N55CCCAM-278-272

Ships in 3 Business Days

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in the most popular enthusiast upgrade specs to ensure there is an option for whatever your power goal is. This N55 camshaft set is designed to bring your engine to the next level! Whether it's for street or track purposes, this camshaft set offers the power gains and throttle response needed to push your N55 to its limits. These camshafts are a direct fit for seamless installation and with some simple tuning can produces great power while retaining factory-like idle and driveability. Valvetronic and Dual VANOS functionality can be fully retained, or with an aftermarket throttle body, the valvetronic system can be locked open, providing even more control.

Show More Show Less

Flex Fuel ECA - Plug And Play - OG Dorch HPFP - F22, F23, F30, F34, F...

T#:55713499

Part#: DE-581-ECA-14OG

Ships in 4 Business Days

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58

Denso Starter Motor - BMW N55 S55 3.0L

For vehicles with an Automatic Transmission

T#:40004863

Part#: 12417631559

Ships in 2 Business Days

$ 461.99

This product was last offered at the strikethrough price on
05-04-2026

$ 390.99 USD

Add to Wish List

Qty

$ 390.99 USD

Add to Wish List

If your car won't turn over, there is a good chance your starter is shot. Denso's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span.

Vargas Coolant Level Extension Harness - BMW B48/B58/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51813310

Part#: VTT-FAB-HC

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Simplify your next fabrication project with the VTT-FAB series Coolant Extension Harness.

Kelford Camshaft Set - Gen 1 B58

T#:25938620

Part#: KEL-CSS-B58-GEN1

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen1 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 1 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen1 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 1 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen1 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 1 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

Hitachi Fuel Supply Module - BMW N20 N55 N26

T#:48850079

Part#: 16117243975

Ships in 6 Business Days

$ 344.99 USD

Add to Wish List

Qty

$ 344.99 USD

Add to Wish List

Delivers fuel from the tank to the engine.

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW B58 3.0L

T#:47610654

Part#: 401-4701

Ships on Oct 1, 2026

20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series ...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

2X Entries Into Our F80 M3 Sweepstakes

T#:52129707

Part#: VTT-FAB-064

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The VTT-FAB-064 by Vargas is a precision-engineered solution for enthusiasts and fabricators building high-performance Garrett-based turbo systems.

Engine Mount - Right

T#:593117

Part#: 22116861406

Ships in 2 Business Days

$ 167.78 USD

Add to Wish List

Qty

$ 167.78 USD

Add to Wish List

Ferrea High Performance Valve Kit - B58

T#:29035336

Part#: FER-HPVK-B58-T28

Ships in 3 Business Days

$ 1,059.99 USD

Add to Wish List

Qty

$ 1,059.99 USD

Add to Wish List

The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.

Show More Show Less

Revshift Polyurethane Motor Mounts F2X/F3X RWD 95A (Green)

T#:13957877

Part#: PMM-F3X4C-95A2

Ships in 7 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.

Show More Show Less

Dorch Engineering PWG N55 38% Lift Kit – HPFP Upgrade - with $400 c...

T#:55569526

Part#: DE-LK-1038-PWGKT

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The factory N55 fueling system leaves a lot to be desired once you turn up the boost. Enter the Dorch Engineering HPFP Lift Kit. This kit is a calculated, high performance solution designed specifically for PWG N55 engines to extract maximum flow from your fueling setup by altering the mechanical lift profile of the pump drive

Show More Show Less

BMW - Toyota ULTRA SERIES B58

T#:33612885

Part#: 389616

Back Ordered

$ 1,722.99 USD

Add to Wish List

Qty

$ 1,722.99 USD

Add to Wish List

The JE Pistons for the B58 engine are high-performance forged pistons designed for BMW's 3.0L inline-six turbocharged engine. These pistons are built with aerospace-grade materials, offering superior strength and durability under extreme conditions. They feature precision-machined surfaces, optimized for high boost applications, reduced friction, and enhanced thermal management. JE Pistons are known for their lightweight design, which improves engine response, while maintaining reliability for both street and track use. Customizable options for compression ratios and coatings are often available to suit specific performance goals.

Show More Show Less

Manley H-Beam Connecting Rod Set - BMW Toyota B58 Gen1 & Gen2 ...

T#:55066626

Part#: MAN-CRS-B58

Ships in 3 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

Designed for the demands of high-performance builds, the Manley H-Beam Connecting Rod Set is the perfect upgrade for BMW/Toyota B58 engines. Manufactured from premium 4340 steel forgings, these rods offer a lightweight construction without compromising strength. Engineered to replace BMW part numbers #11248623419 and #11247589671, the 148mm-long rods are ideal for high-horsepower and forced-induction applications. Whether you're tuning for street, track, or drag racing, these rods can handle up to 8500 RPM and support engines producing up to 1200 horsepower. Each set includes ARP 2000 rod bolts, providing additional clamping force and reliability under extreme conditions.

Show More Show Less

Vargas Crank/Vibration Damper Bolts - M10 x 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51778130

Part#: VTT-BMW-DAMPER-B

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.

Oil Sensor O-Ring

T#:57580025

Part#: 12617604790

Ships in 3 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Built by Ajusa to stringent quality standards, this oil level sensor O-ring provides a precise, reliable seal for your engine oil pan assembly.

Genuine BMW Fuel Injector Kit

T#:5175711

Part#: 13538625396KT

Ships in 2 Business Days

$ 2,398.99

This product was last offered at the strikethrough price on
08-07-2026

$ 2,389.99 USD

Add to Wish List

Qty

$ 2,389.99 USD

Add to Wish List

Pure Turbos NEW B48 Gen1 Pure400 Turbo Upgrade - BMW F22/23 F3X G01/0...

T#:53326236

Part#: G1B48P400

In Stock

$ 1,136.99 USD

Add to Wish List

Qty

$ 1,136.99 USD

Add to Wish List

The Pure Turbos Pure400 for the BMW B48 is a precision-engineered performance upgrade designed for the first generation of BMW’s modular 2.0L inline-4 engine. This unit is built into a brand-new aftermarket housing that utilizes an OEM-style design, ensuring a seamless plug-and-play installation without the requirement of a core exchange or refundable deposit. The turbocharger features an upgraded Pure Turbos billet compressor wheel and a higher-flowing turbine wheel, which together significantly improve exhaust efficiency and airflow capacity. To maintain long-term reliability under the increased thermal and mechanical stresses of high-boost applications, the Pure400 is equipped with a heavy-duty upgraded bearing housing and undergoes meticulous VSR high-speed balancing. Engineered to support over 350 wheel horsepower, depending on fueling and supporting modifications, this upgrade provides a substantial power increase while maintaining the responsive, low-end torque characteristics of the original B48 engine. It is a direct-fit solution for a wide range of 2014–2019 F-series and G-series models, including the 230i, 330i, and X3 xDrive30i, prior to the Technical Update (TU) changes. While the hardware integrates perfectly with factory connections, custom tuning is mandatory to fully optimize the engine’s performance and ensure safe operation. This kit offers a robust and reliable path for 4-cylinder enthusiasts looking to achieve elite-level performance with a clean, factory-appearing finish.

Show More Show Less

Genuine BMW Ignition Service Kit - B58 Gen1

T#:27138530

Part#: 12138643360KT11

Ships in 2 Business Days

$ 676.99 USD

Add to Wish List

Qty

$ 676.99 USD

Add to Wish List

Sluggish acceleration, misfires, and rusty terminals are symptoms of a worn coil. Located on the top of your engine, these coils should be inspected and replaced as needed or every 60,000 miles.

If you are replacing any aspect of your ignition system, it's best to replace all serviceable components. This kit includes ignition coils and spark plugs for a comprehensive service that is guaranteed to last.

Kit Includes:

6 Genuine BMW Ignition Coils - 12138643360 6 Genuine BMW Spark Plugs - 12120040551

Genuine BMW Spark Plug Service Indicator Label - 01399791390

Show More Show Less

Genuine BMW B+ Terminal Clamping Ring - F3X F8X

T#:526762

Part#: 61139257506

Ships in 1 day

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

This clamping support ring is located between the under-hood positive battery terminal and the electrical distributor it mounts to.

Genuine BMW Oxygen Sensor - Upstream - N20 2.0L

T#:22382

Part#: 11787589121

Ships in 1 day

13% off MSRP $ 406.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 352.99 USD

Add to Wish List

Qty

13% off MSRP

$ 406.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 352.99 USD

Add to Wish List

Genuine BMW Oxygen Sensor -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW Impulse Sending Wheel for Timing Chain Sprocket - Intake/...

T#:178126

Part#: 11367598215

Ships in 1 day

6% off MSRP $ 46.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD

Add to Wish List

Qty

6% off MSRP

$ 46.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.99 USD

Add to Wish List

Genuine BMW Impulse Sending Wheel -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW Closure Ring - Multiple BMWs

T#:44344

Part#: 16117188565

Ships in 1 day

6% off MSRP $ 24.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.41 USD

Add to Wish List

Qty

6% off MSRP

$ 24.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.41 USD

Add to Wish List

Fuel tank closure ring.

Genuine BMW Base - 07147273549

T#:29859

Part#: 07147273549

Ships in 1 day

7% off MSRP $ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.99 USD

Add to Wish List

Qty

7% off MSRP

$ 14.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13.99 USD

Add to Wish List

Genuine BMW Base -
This item fits the following BMW Chassis:
F01,F02,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Genuine BMW Piston

T#:186517

Part#: 11258619196

Special Order: No Guaranteed ETA

4% off MSRP $ 403.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 385.99 USD

Add to Wish List

Qty

4% off MSRP

$ 403.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 385.99 USD

Add to Wish List

Genuine BMW Piston - (0)
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less