Please ensure your correct model is selected
The Akrapovic Evolution exhaust systems for the BMW F30 335i & F32 435 are the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, these systems feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes.
This Akrapovic Evolution exhaust improves upon the stock exhaust system of the BMW 335i in numerous areas. The first visible improvement is the additional power of 7.1 HP (at 5.850 rpm) and 10.7 Nm (at 3500 rpm). The range between 2.000 rpm and 3.000 rpm and at 3.500 rpm was particularly improved. A noticeable improvement can also be observed at high RPM where the Evolution gives more power. This sporty elegance makes this Bavarian machine stand out from the rest and offers the taste of a more powerful version, accentuated with the additional power gains and weight losses of the Evolution system. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock-level sound at normal cruising, and a joyful deep sporty note when driving the 335i more dynamically. The Evolution systems replace the stock exhaust from the catalytic converters back.
Because of size and dimensions of this exhaust, it can not be shipped via conventional carriers such as UPS or FedEx, and must be shipped via Truck Frieght shipping. Not for sale outside the US or Canada.
This Akrapovic Exhaust fits the following BMWs:
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F36 BMW 435i Gran Coupe
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Arguably THE BEST modification for your B46/B48. This muffler delete sounds too good to be a 4 cylinder! The combination of B48 and muffler delete surpasses all sound expectations from a 4-cylinder! Impressive direct-fit solution. With this new muffler delete you can transform the sound and driving experience of your 330 or 430. A simple installation that can be completed with hand tools gives you the ability to take your car to the next level at home in your garage!
The ECS B48 muffler delete removes the heavy and restrictive factory exhaust muffler and replaces it with a high-flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost-effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 21.0 lbs., weighing in at only 7.0lbs compared to the OEM muffler at 28.0lbs!
Features and benefits:
Enhanced exhaust tone
Simple installation (with instructions!)
21lb weight savings! (Factory muffler 28 lbs, muffler delete 7 lbs!)
Tip adjustment capability
Slide farther on for left and right adjustment
Rotate for verticle adjustment
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Dual staggered tip exhaust tips (integrated)
Installation and Support:
Installation is as easy as cutting, placing into position, and clamping!
Tools you might want for the job:
Exhaust hanger removal pliers - T379176
Exhaust pipe cutter - T385451
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
05-07-2026
A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary.
This is the OEM Bosch oxygen sensor for BMW's with the N20 and N26 motors. This sensor is mounted in the catalytic converter in the rear most position. OEM replacement for BMW # 11787589122.
Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Fits the following BMWs:
All models with the N20 or N26 motor
This product was last offered at the strikethrough price on
05-07-2026
BMW F Chassis Oxygen Sensor - Upstream Catalytic Converter is a critical component for monitoring exhaust emissions and optimizing engine performance. Positioned at the front of the exhaust manifold, this sensor, also known as a Lambda probe, provides essential data to your vehicle's computer, ensuring efficient operation and reduced emissions.
Ensure your BMW F chassis operates at peak performance with the Upstream Catalytic Converter Oxygen Sensor, designed for precise emissions control and engine efficiency.
This product was last offered at the strikethrough price on
05-07-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about.
The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.
Features Include
NO CEL when using this downpipe
GESI EPA registered high flow and fully OBD2 compliant
Casted upper stainless steel V-Band for precise fitment
3 inch diameter piping allows for maximum power output
Quicker turbo spool
Rated for 500 to 850 hp applications
Withstands up to 1500° F
Can reach operational efficiency within 9 seconds of startup
Easily bolts-on – no cutting or welding required
Durable construction from TIG welded 304 stainless steel
Ultra high flow 400 cell per square inch catalyst
EPA certified for use on OBD2 vehicles (1996 and newer) except in California
304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability
GESi® proprietary precious metal loading technology ensures greatly reduced emissions
Both passengers and drivers are safe from harmful emissions and noise
Precise fitment
Made in Miami, Florida
Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)
FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G
Transform the sound profile and driving dynamics of your BMW without replacing the entire exhaust system! Engineered specifically for the N20-equipped F3X platform, this direct-fit muffler delete delivers an aggressive, sporty tone you wouldn't expect from a 4-cylinder engine.
By eliminating the restrictive factory muffler and replacing it with a high-flow, straight-through exhaust pipe, this kit unlocks an incredible surge in volume and a sporty tone. Beyond the dramatic sound upgrade, this setup drastically improves performance efficiency through massive weight savings. The high-flow straight pipe removes 21 lbs from the rear of the vehicle, dropping the total axle-back exhaust weight down to just 7 lbs. Designed for quick at-home installation, it installs using basic garage hand tools and integrates perfectly with your OEM rear valance for a clean, OEM+ aesthetic.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
