BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 4 Series F33 (2014+)

Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Reduction in back pressure for increased throttle response, TQ and HP
Dual exit with fitted exhaust tips
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe)
Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings.
Valved Rear muffler
Clamps and Hardware for an OEM+ install
Optional Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet
Product Development:

Our F Chassis B58 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Increase flow, turn up the volume, and shed some weight for the track. This is your chance to build your very own customized exhaust for your 335. We are excited to offer you the opportunity to spec out your exhaust just the way you want it. These exhaust components are strikingly good looking with beautiful welded pie cut construction and offer weight savings of over 55%. You can drop more than half the weight of your factory exhaust and give your car the aggressive sound it should have came optioned with from the factory.

We set out to amplify the F30/F32 with a proper exhaust system. To accomplish this goal, our engineers increased flow, give you the options to reduce weight by 27lbs, and deliver an exhaust system that captures the full unrestricted sound of the turbo inline-6 N55 engine. The increase in flow is gained from single free flowing 3.0" titanium exhaust pipes that feed into the best designed muffler on the market. Our Turner muffler is specifically designed with flow in mind to ensure that even with the exhaust valves closed, the muffler flows and sounds better than the stock muffler. Weight reduction is achieved by replacing the factory piping with lightweight Ti22 titanium and a full titanium muffler for the most weight advantage possible. The best part of the full titanium exhaust is the capability to control just how aggressive you want to your exhaust to sound, far beyond the point that the factory exhaust is able to perform. All of this plus the direct fitment and straight forward installation leads to our Turner Titanium exhaust being the clear answer in your mission to find the best exhaust for your N55 powered F30.

Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Ultra-lightweight, Gr2 Titanium Alloy Material in a natural finish - 1mm wall thickness, back purged and TIG-welded throughout
3.0"OD tubing full system featuring pie-cut bend sections
Weight savings over the OEM exhaust system:
OEM Downpipe-back (without tips): 48 lbs
Turner Titanium Downpipe-back (without tips): 21 lbs
27 lb weight reduction!
Titanium 10mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Lightweight Gr2 Titanium Valved Muffler Optimized for superior flow over OEM

Muffler deleted N55-powered BMWs are known to spark the interest of enthusiasts everywhere; the F3x chassis is no different. Turner Motorsport's line of muffler deletes offers quality fit and finish that will outlast the aluminized piping from your local exhaust shop. Turner CAD designed the F3x N55 muffler delete in-house, ensuring that each unit has integrated hangers and is mandrel bent to precisely fit in the factory exhaust location. Not a fan of the turndown? There's a cut line to add optional aftermarket tips Coupled with our Schwaben Exhaust Pipe Cutter, this muffler delete can easily be installed in your garage.

Turner Muffler Delete Kit removes the heavy and restrictive factory exhaust muffler and replaces it with a high flow, straight-through exhaust pipe. This adds a louder exhaust note in a simple, cost effective way without replacing the entire exhaust system and is fully compatible with the OEM rear valance. The muffler delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds. As an added bonus, our muffler delete shaves off 17.0 lbs. , weighing in at only 8.0 lbs compared to OEM muffler at 25.0 lbs!

PART DESIGN

TIG Welded, brushed finish, 304 stainless steel 70mm x 1.25 wall thickness tubing for straight-through exhaust gas routing
Mandrel bent to fit the OE exhaust location
Integrated hanger for a direct fit
Includes stainless steel exhaust clamp for the inlet location for a secure fit
​Flared inlet slips over the OEM exhaust tubing for a simple installation
Slightly larger cross sectional area for increased flow capability
​

Free ground shipping! 

This front section is a direct replacement for the stock 235i/335/435/M2 exhaust with one key difference - the Supersprint uses full 80mm piping for improved flow out of the turbo. One of the best and easiest ways of getting more power from a stock turbo is by helping it push exhaust gas and larger and smoother exhaust piping will help with that. Where the stock system is bent and crimped, the Supersprint is a full 80mm along its entire length. This section 1 will fit to the stock or Supersprint turbo downpipe and a stock or Supersprint section 2 exhaust.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

This item fits the following BMWs:
2014+ F22 BMW M235i
2012+ F30 BMW 335i - Sedan
2013+ F32 BMW 435i - Coupe
2013+ F33 BMW 435i Convertible
2014+ F36 BMW 435i Gran Coupe
2016+ F87 BMW M2

Free ground shipping!

This oversized front (section 1) pipe is a direct replacement for the stock exhaust section. It's been optimized for flow with 80mm tubing and mandrel bends. It does have compressed sections like on the stock piece. Although this is very similar to the factory exhaust pipe the larger size from the Supersprint provides better flow and less restriction (key for making power in turbocharged engines).

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

section:section 1

connects to:stock or Supersprint downpipe; stock or Supersprint section 2

material:T304 stainless steel

This item fits the following BMWs:
2012+ F30 BMW 335i xDrive 335xi - Sedan
2014+ F32 BMW 435i xDrive 435xi - Sedan

For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. 

The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.

Features Include

NO CEL when using this downpipe

GESI EPA registered high flow and fully OBD2 compliant

Casted upper stainless steel V-Band for precise fitment

3 inch diameter piping allows for maximum power output

Quicker turbo spool

Rated for 500 to 850 hp applications

Withstands up to 1500° F

Can reach operational efficiency within 9 seconds of startup

Easily bolts-on – no cutting or welding required

Durable construction from TIG welded 304 stainless steel

Ultra high flow 400 cell per square inch catalyst

EPA certified for use on OBD2 vehicles (1996 and newer) except in California

304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability

GESi® proprietary precious metal loading technology ensures greatly reduced emissions

Both passengers and drivers are safe from harmful emissions and noise

Precise fitment

Made in Miami, Florida

Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)

FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G

Free ground shipping! 

Supersprint performance exhaust adds more sound and substance to the ultra-quiet factory exhaust. Supersprint's exhaust philosophy is to make power without undue noise. They alter the size of the muffler, internal packaging, and piping sizes to extract more power while also delivering a refined and exotic sound. On the 335i that means a tuned and throaty exhaust note that is not intrusive or obnoxious. This muffler is a direct bolt-on to the factory system or combine with other Supersprint components to fine-tune the sound. This F30 Supersprint muffler has 4 80mm tips for a more muscular and imposing appearance (slight modification required on the bumper).

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

section:rear muffler

connects to:OEM or Supersprint section 2

tip style:4 x 80mm round polished stainless

material:T304 stainless steel

This item fits the following BMWs:
2012+ F30 BMW 335i 335i xDrive 335xi - Sedan
2014+ F32 BMW 435i 435i xDrive 435xi - Sedan