BMW 4 Series F36 (2015+)

Enhance the interior of your BMW with the M Performance Carpeted Floor Mats for the rear. These thin, sleek, and athletic non-porous textile mats not only add a performance aesthetic to your vehicle but also provide effective carpet protection.

• Tailored for the rear area of your BMW
• Non-porous textile for a sleek and athletic look
• Adds a distinctive M Performance style to the interior
• Protects the carpet from wear and stains
• Easy to clean and maintain for long-lasting use

Upgrade the interior aesthetics and protection of your BMW with these M Performance Carpeted Floor Mats for the rear, combining style and functionality seamlessly.

APEX ARC-8 18" Staggered Wheel Set -- 18x8.5" / 18x9.5"

This set of 8.5" and 9.5" ARC-8 wheels is an easy staggered fitment for the E46 M3 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use an 8.5" ET38 on the front and a 9.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance.

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

The M Performance steering wheel is fully covered Alcantara to enhance grip in extreme driving situations and has a flat bottom to enhance the sporty cockpit appearance. A red stripe is located at the 12 oclock position to provide a quick visual indicator of the steering wheel position.

This item fits the following BMWs:
2014+ F22 BMW 228i M235i
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo

Vehicle must be equipped with the M sport brakes in order for rear rotors to fit. 
Brembo high-performance 4-piston aluminum fixed caliper on the front axle and 2-piston aluminum fixed caliper on the rear axle. Improved thermal resistance thanks to larger, internally-ventilated, lightweight-construction sports brake discs. Dimpled and grooved brake discs also reduce water film build-up between the brake lining and the disc surface. Available in M Performance Red, Yellow or Orange – all with an M logo on the outside of the caliper. Dimpled and grooved, internally-ventilated lightweight brake disks with riveted aluminum hat measuring 370x30mm on the front axle and 345x24mm on the rear axle. 
Kit includes:

• Front Calipers 
• Front Dimpled & Slotted Brake Discs 
• Front BMW M Peformance Brake Pads 
• Front Painted Brake Backing Plates 
• Front Brake Wear Sensors
• Rear Painted Brake Calipers 
• Rear BMW M Performance Brake Pads 
• Rear Brake Pad Wear Sensors.
• (rear brake discs must be ordered separately).
  The BMW M Performance sports brake system is only approved in combination with  18" or larger wheels.
  
  This item fits the following BMWs:
  2012+ F30 BMW  320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
  2013+ F31 BMW  328i xDrive 328d xDrive - Wagon
  2013+ F32 BMW  428i 428i xDrive 435i 435i xDrive - Coupe
  2014+ F34 BMW  328i xDrive GT, 335i xDrive GT - Gran Tourismo

   

   

This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Apex ARC8 18x10" Square Wheel Set

If you're tracking your BMW you should absolutely have stickier rubber on wider wheels. Most BMWs have a staggered wheel set with a narrow front wheel that results in understeer. Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. Square wheel sets of the same size and offset also allow you to rotate tires around to get the most life out of pricey track tires. We have put this wheel set together using four APEX 10.0" wheels in a ET25 offset. A 10" wheel allows for 275-285 performance or R-comp tires. This is a very aggressive offset and custom alignment settings will be required. Trimming of plastic fender liners or fender rolling may also be required depending on tire size/type and ride height.

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.