BMW Engine Parts for BMW 4 Series F36 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Precision Raceworks - Corporate Logo
T#:19858319
Part#: 601-0199
Ships in 10 Business Days
$ 1,399.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH-PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4.5 (6 literes per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support OVER 1,000whp! (Rated for 1000+whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, Slide the bucketless bracket onto side of bucket and close the top hat you are ready to go! Included in the box Genuine OEM fuel pump bucket assembly Pre-assembled with OEM Brushless and mounted Walboro 450 Includes fuel sending unit (fuel level sensor) Upgraded AN-6 fuel feed lines with fuel pressure regulator and return lines<> New In-Line Fuel Filter Plug and play boost reference harness (zero cutting, stripping, crimping) 13psi boost reference switch (hobbs switch) This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Stage 4.5 Pump flow 72psi (5bar): 6 LPM Horsepower Supported Pump Gas: 1,000+ Horsepower Supported 100% E85: 1,000+ Aftermarket EKP Required: No
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161697
Part#: 622-0290-BLK
Ships in 10 Business Days
$ 269.99 USD
Free Shipping on orders $49 and up

BMW B58 / S58 Black Billet Engine Fluid Cap Set is a premium upgrade designed to enhance both the performance and aesthetics of your BMW’s engine bay. Crafted from high-quality billet aluminum, this cap set provides superior durability while replacing the factory plastic caps for a sleek, high-end look.

Engineered to maintain full OEM functionality, these caps integrate the original pressure relief valves, ensuring proper system operation. The deep black anodized finish adds a bold and aggressive appearance while offering excellent resistance to heat and corrosion.

  • Precision-machined billet aluminum – Stronger and more durable than factory plastic caps
  • OEM pressure relief compatibility – Ensures safe and reliable system performance
  • Sleek black anodized finish – Adds a high-performance look to your engine bay
  • Heat and corrosion-resistant – Built to withstand extreme conditions for long-lasting reliability
  • Direct replacement design – Fully replaces factory caps for a seamless fit
  • Simple installation – Requires swapping OEM pressure relief valves for full functionality

Upgrade your BMW’s engine bay with the BMW B58 / S58 Black Billet Engine Fluid Cap Set, combining premium style with high-performance reliability.

Show More Show Less
Supertech - Corporate Logo
T#:21604309
Part#: SPRKFE20N54BE2
Ships in 6 Business Days
$ 965.99 USD
Free Shipping on orders $49 and up
Supertech has the high performance valvetrain components you need to take your build to the next level. ​​Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 88 @ 36.5 Open Pressure: 160 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 7.25 Kit spring: SPR-FE20BE-2 Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:390263
Part#: VTTN20-350
Ships on Aug 18, 2026
Starting at $ 1,977.00 USD
Free Shipping
Starting at $ 1,977.00 USD
Free Shipping

Vargas Stage 1 N20 turbo upgrade is good up to 350whp with proper tuning and high grade fuel. Vargas N20 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N20.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 350. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less

CTA Tools - Corporate Logo
T#:640452
Part#: CTA3884
Ships on Aug 19, 2026
$ 60.75 USD
Free Shipping on orders $49 and up
Removes and installs the serpentine belt on B36, B38, B46 & B48 engines
CTA Tools - Corporate Logo
T#:1241318
Part#: CTA2030
Ships on Aug 19, 2026
$ 81.95 USD
Free Shipping
$ 81.95 USD
Free Shipping
Get the complete set and be ready.

CP Carrillo - Corporate Logo
T#:13332229
Part#: CAR-CRS-N20-WMC
Ships on Aug 19, 2026
$ 1,333.99

This product was last offered at the strikethrough price on
03-06-2026

$ 1,199.99 USD
Free Shipping on orders $49 and up
$ 1,199.99 USD
Free Shipping on orders $49 and up
New TTE400 N20 Turbocharger Upgrade
Only works with aftermarket inlets
The Turbo Engineers - Corporate Logo
T#:13200606
Part#: N20TTE400
Ships on Aug 18, 2026
Starting at $ 2,164.99 USD
Free Shipping
Starting at $ 2,164.99 USD
Free Shipping
To construct a TTE400 N20, the folks at TTE change the original compressor and employ a far larger and more efficient billet 6+6 wheel and mill the compressor cover to the optimum gap to match the new compressor profile. Notice how they CNC mill the cover to have a smooth transition to the intake inlet, no big step to hinder airflow as you see on the competition's offerings. They replace the original exhaust turbine and CNC mill the turbine housing to install a larger 9 blade turbine for greater gas flow and lower backpressure.
Show More Show Less

TurboSmart - Corporate Logo
T#:4921469
Part#: TS-0551-1012
Ships on Aug 19, 2026
10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
10% off MSRP
$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.
Show More Show Less

CTA Tools - Corporate Logo
T#:584133
Part#: CTA2241
Ships on Aug 19, 2026
$ 172.47 USD
Free Shipping
$ 172.47 USD
Free Shipping
CTA Tools' front crankshaft seal removal tool is designed specifically for the BMW N20 & N26 engine
CTA Tools - Corporate Logo
T#:587215
Part#: CTA7675
Ships on Aug 19, 2026
$ 362.78 USD
Free Shipping
$ 362.78 USD
Free Shipping
Lock your camshafts easily with this tool kit from CTA tools.
MHD Tuning - Corporate Logo
T#:54852023
Part#: MHD-UNLOCKER
Ships on Aug 19, 2026
New Item
$ 373.99 USD
$ 373.99 USD
MHD Unlocker with a plug and play harness/connections - Simple and easy unlock at home in a few minutes!


Precision Raceworks - Corporate Logo
T#:38161737
Part#: 201-0406
Ships on Aug 21, 2026
$ 24.99 USD
Free Shipping on orders $49 and up
This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor
Vargas Turbo Technologies - Corporate Logo
T#:5122282
Part#: TRIPLECAPBLUE1
In Stock
$ 251.99 USD
Free Shipping
$ 251.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
Genuine BMW - Corporate Logo
T#:5135658
Part#: 11258637991
Special Order: No Guaranteed ETA
4% off MSRP $ 133.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD
Free Shipping
4% off MSRP
$ 133.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD
Free Shipping
Includes upper, lower, and oil control ring - 6 sets needed per vehicle

Elring - Corporate Logo
T#:44767267
Part#: 773.910
Special Order: No Guaranteed ETA
$ 67.99 USD
Free Shipping on orders $49 and up
If your valve cover is leaking oil or you are experiencing vacuum leaks, there is a good chance your valve cover gasket needs to be replaced. This kit from Elring includes the three main valve cover gaskets that need to be replaced, including the inner and outer gaskets, as well as the high-pressure fuel pump gasket located on top of the valve cover. Replaces BMW p/n 11128621951, 11128638124, & 11128633750
Show More Show Less

Elring Cylinder Head Gasket - BMW Gen1 B46/B48 2.0L
For vehicles with production from 07/2015 with the B46/B48 Gen1 engine
Elring - Corporate Logo
T#:44767276
Part#: 597.170
Ships in 9 Business Days
$ 134.99 USD
Free Shipping on orders $49 and up
$ 134.99 USD
Free Shipping on orders $49 and up
Head gasket failure is common in higher mileage vehicles or engines that have overheated. The signs of a failed head gasket include milky oil, loss of performance, and a sweet-smelling white smoke from the exhaust. It is essential to replace yours immediately to prevent further damage to your engine. Replaces BMW # 11128654273
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2929002
Part#: 197883929T
Special Order: No Guaranteed ETA
$ 1,435.99 USD
Free Shipping
$ 1,435.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your B58 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Spool Performance - Corporate Logo
T#:640951
Part#: SP-BMFXXN-FP
Special Order: No Guaranteed ETA
$ 749.00 USD
Free Shipping
$ 749.00 USD
Free Shipping
Stage 3 LPFP upgrade kit for your N55 engine
Spool Performance - Corporate Logo
T#:640940
Part#: SP-BMB58-FP-DY
Special Order: No Guaranteed ETA
$ 499.00 USD
Free Shipping
$ 499.00 USD
Free Shipping
LPFP upgrade kit for your B58 engine - Save by assembling on your own!

Spool Performance - Corporate Logo
T#:31291063
Part#: SP-B58-FX350-NEY
Special Order: No Guaranteed ETA
$ 2,348.00 USD
Free Shipping on orders $49 and up
The FX-350 is truly Plug and Play for all platforms we are offering and comes with all the lines and hardware needed for a clean easy install.

ACL - Corporate Logo
T#:637190
Part#: 6B1584H-.025
Special Order: No Guaranteed ETA
$ 261.99 USD
Free Shipping
$ 261.99 USD
Free Shipping
Upgraded Bearing Shells for you N55/N54/S55B30!
Bremmen Parts - Corporate Logo
T#:4921499
Part#: 13538643665
In Stock
Sale - Save 3% $ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.09 USD
Free Shipping
Sale - Save 3%
$ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.09 USD
Free Shipping
FTP Motorsport - Corporate Logo
T#:586831
Part#: SG80039-3
Special Order: No Guaranteed ETA
$ 200.00 USD
Free Shipping
$ 200.00 USD
Free Shipping
Modern engines are designed to consume no oil. Even with advanced technology, sometimes an old fashion solution is the best kind. Oil consumption is a leading cause of poor fuel economy, failed emissions, and exhaust smoke. This catch can kit comes complete and ready to separate air and oil so your engine can breathe properly again. Features: Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Large Intake / Exhaust No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Lightweight Aluminum
Show More Show Less


FTP Motorsport - Corporate Logo
T#:582217
Part#: SG80036
Special Order: No Guaranteed ETA
$ 40.00 USD
Free Shipping on orders $49 and up
If you are planning on running additional boost, keeping tabs on the level is going to be an important factor. For doing this you have many options...Apps, scanners, coding. But what about a good old mechanical gauge? Now you can add one the easy way with this sandwich plate adapter from FTP. Simply remove the factory boost sensor install the plate, re-bolt the boost sensor and you're done.
Show More Show Less
Bremmen Parts - Corporate Logo
T#:8677178
Part#: 11428596283
In Stock
Sale - Save 15% $ 159.99

This product was last offered at the strikethrough price on
07-26-2026

$ 135.99 USD
Free Shipping
Sale - Save 15%
$ 159.99

This product was last offered at the strikethrough price on
07-26-2026

$ 135.99 USD
Free Shipping
Includes heat exchanger and gaskets. ?OE Cross References: 11428585624 11428596283
MMX Performance - Corporate Logo
T#:4552049
Part#: MMR03-0502-KP
Special Order: No Guaranteed ETA
$ 21.99 USD
Free Shipping on orders $49 and up
The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.
Show More Show Less

MMX Performance - Corporate Logo
T#:5269482
Part#: MMR03-0502BL
Special Order: No Guaranteed ETA
$ 136.99 USD
Free Shipping
$ 136.99 USD
Free Shipping
This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less

MMX Performance - Corporate Logo
T#:29035359
Part#: MMR17-1502
Special Order: No Guaranteed ETA
$ 81.99 USD
Free Shipping on orders $49 and up
Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.
Show More Show Less
Bremmen Parts - Corporate Logo
T#:38924612
Part#: 11217580483
Special Order: No Guaranteed ETA
Sale - Save 3% $ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 1,608.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,560.27 USD
Free Shipping on orders $49 and up
Direct replacement N55 crankshaft for a fraction of the cost of Genuine

Schwaben - Corporate Logo
T#:2631900
Part#: 029054SCH01A
Special Order: No Guaranteed ETA
Sale - Save 5% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.09 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.09 USD
Free Shipping on orders $49 and up
Embark on a new level of circuit testing with the Schwaben Digital Circuit Tester With Test Probes. Whether you're a seasoned professional or a dedicated enthusiast, this tool equips you with the confidence and precision needed for intricate diagnostics. And with our LIFETIME REPLACEMENT program, you can rest assured that you've found the ultimate circuit tester. Features: Versatile Voltage Compatibility: Seamlessly navigate 6, 12, and 24V systems, offering comprehensive diagnostics for various setups. Trusted CE Approval: Prioritize safety and accuracy with CE Approval, allowing you to confidently undertake complex circuit assessments. Extended Reach: Effortlessly maneuver through testing scenarios, even in challenging areas, with the coil cord's 12-foot extension. Pinpoint Accuracy: Eliminate guesswork with the real-time, precise voltage readings displayed on the digital screen, facilitating well-informed decisions. Intuitive Power and Ground Indication: Streamline your testing process using vibrant red (power) and green (ground) LCD indicators for swift and accurate connections. Universal Compatibility: Seamlessly integrate with a wide range of circuit testing equipment thanks to the standard 4mm banana jacks on the probes, offering hassle-free use alongside your existing tools. Includes: Digital circuit tester Piercing probe Long probe Small probe WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.
Show More Show Less
Fuel Pump Assembly
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:639286
Part#: 16117243975
Ships in 2 Business Days
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
This fuel pump is located inside the fuel tank on the right side. When the pump fails, your engine could suffer fuel starvation. URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Packaged by Turner - Corporate Logo
T#:640375
Part#: 113175840841KT1
In Stock at Vendor
$ 693.79 USD
$ 693.79 USD
The N55 in your BMW is an interference engine, meaning that if the timing chain were to fail your engine would suffer catastrophic damage due to valvetrain components colliding with each other. Over time the timing chain will start to wear and stretch, potentially causing it to skip timing or just completely fail. Also, the timing tensioners themselves could fail! Early symptoms of timing chain wear include front end noise not associated with VANOS, or slapping noises coming from the timing cover. Turner Motorsport has assembled a complete kit that includes everything necessary, as well as small hardware, to completely service the timing on your N55. Tools needed to do the job can be found on our site as well.
Show More Show Less

Ina - Corporate Logo
T#:42301983
Part#: ZC0219
In Stock
$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.
Vargas Turbo Technologies - Corporate Logo
T#:52129732
Part#: VTT-TI-BOLTS-2-B
Back Ordered
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.
Denso - Corporate Logo
T#:384619
Part#: 12317616119
Back Ordered
$ 442.99 USD
Free Shipping
$ 442.99 USD
Free Shipping

Denso Brand 

When power starts to fade in your BMW, chances are your alternator is losing power. The warning light should illuminate, warning you of such a failure. Replace with a new unit today. Do not get stuck on the side of the road.

Show More Show Less


Genuine BMW - Corporate Logo
T#:528044
Part#: 11417643046
Ships in 1-2 days
8% off MSRP $ 1,103.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,010.99 USD
Free Shipping
8% off MSRP
$ 1,103.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,010.99 USD
Free Shipping
The oil pump is responsible for making sure your engine is getting the proper oil flow.
CP Carrillo - Corporate Logo
T#:25042509
Part#: SCR9101-4
Back Ordered
$ 1,230.99 USD
Free Shipping
$ 1,230.99 USD
Free Shipping
Carrillo rods are your number one option for performance connecting rods! If you are looking to upgrade your N20 engine to handle greater power, we highly recommend these Pro-H connecting rods. Upgrading connecting rods in your engine can bring several benefits, particularly if you're looking to enhance performance, reliability, and overall durability. Here are some reasons why you might consider investing in upgraded connecting rods: Increased Strength: Upgraded connecting rods are often made from stronger materials, such as forged steel or titanium, compared to stock rods. This increased strength helps withstand higher levels of stress and load, making them suitable for high-performance applications. Improved Durability: Enhanced materials and manufacturing processes contribute to improved durability, reducing the risk of connecting rod failure, especially in high-stress situations. This is crucial for engines that undergo frequent high-speed or high-stress conditions, such as in racing or heavy-duty applications. Higher RPM Capability: Upgraded connecting rods are designed to handle higher engine RPM (revolutions per minute) without succumbing to fatigue or deformation. This is beneficial for those seeking increased horsepower and torque at higher engine speeds. Reduced Weight: Some upgraded connecting rods are engineered to be lighter while maintaining strength, contributing to a lower overall rotating mass in the engine. This can result in quicker revving, improved throttle response, and better overall performance. Enhanced Precision: Upgraded rods often undergo more precise machining processes, ensuring tight tolerances and improved balance. This precision can lead to better engine stability and reduced vibration, ultimately extending the life of engine components. Compatibility with High-Performance Builds: If you're planning on modifying your engine for increased horsepower through methods like turbocharging or supercharging, upgraded connecting rods become essential. They provide the necessary strength and reliability to handle the increased stresses associated with forced induction. Prevention of Catastrophic Failures: Upgrading connecting rods can act as a preventive measure against catastrophic engine failures. The improved strength and durability reduce the risk of a connecting rod breaking, which could lead to severe engine damage. Specifications: CC(in): 5.683 CC(mm): 144.35 Style: PRO-H Bolt Size: 3/8 Bolt Type: WMC Pin Width(in): 0.822 Pin Width(mm): 20.88 Big Width(in): 0.822 Bid Width(mm): 20.88 Big Bore(in): 2.1112 Big Bore(mm): 53.62 Pin Size: 22mm QTY: Set of 4 Founded by Fred Carrillo in 1963, Carrillo Connecting Rods was established with an unwavering commitment to uncompromising standards in manufacturing. Fred recognized that the relentless pursuit of speed demanded an equally fervent dedication to the quality of components. This foundational philosophy remains as strong today as it was at the inception of Carrillo in 1963. At CP-Carrillo, quality and pride are inseparable. The process of crafting a CP-Carrillo rod transcends mere forging, production targets, and shipping deadlines. The evolution of connecting rod design has become a collaborative effort involving skilled specialists. Each connecting rod is a precision symphony, with material specialists, forging experts, production craftsmen, design engineers, and engine specialists contributing their expertise and artistry. Customer feedback plays a pivotal role in our continuous product improvement. The close interaction between customers, engineering, and manufacturing fosters the most effective rod designs, enhancing accuracy and service—a value that becomes apparent during your engine build. CP-Carrillo's dimensional integrity stands unparalleled, setting a standard of excellence in the industry.
Show More Show Less
Corteco - Corporate Logo
T#:556323
Part#: 22116862549
Back Ordered
$ 94.99 USD
Free Shipping
$ 94.99 USD
Free Shipping
Reduce driveline vibrations with a new motor mount

Nissens - Corporate Logo
T#:380463
Part#: 11427525333
Ships in 7 Business Days
$ 118.99 USD
Free Shipping on orders $49 and up
Heat Exchanger - This item fits the following BMW Chassis: E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26,N51,N51,N52,N52N,N54,N55
Show More Show Less

Hitachi - Corporate Logo
T#:589968
Part#: 11327601233
Back Ordered
$ 55.00 USD
Free Shipping on orders $49 and up
$ 55.00 USD
Free Shipping on orders $49 and up
A faulty camshaft follower can damage the engine and cause incorrect valve timing.
Pneumatic Boost Solenoid - N20 N55 N63 S63 Engines
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:6166479
Part#: 11747626351
Ships in 2 Business Days
$ 99.99

This product was last offered at the strikethrough price on
06-30-2026

$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping

Optimize the performance of your BMW's N20, N55, N63, or S63 engine with the Pneumatic Boost Solenoid. This essential actuator plays a crucial role in regulating vacuum, influencing the overall performance of your vehicle. Ensure your BMW operates at its best by addressing faulty boost solenoids promptly.

  • Engine Performance Optimization: The boost solenoid enhances the overall performance of N20, N55, N63, and S63 engines.
  • Vacuum Regulation: Precisely regulates vacuum levels, contributing to efficient engine operation.
  • Compatibility: Designed for BMW vehicles with N20, N55, N63, and S63 engines for a perfect fit.
  • Fault Resolution: Promptly addressing faulty boost solenoids ensures consistent and reliable vehicle performance.

Upgrade your BMW's engine performance with the Pneumatic Boost Solenoid, designed to deliver optimal functionality for N20, N55, N63, and S63 engines.

Show More Show Less

Cometic - Corporate Logo
T#:31522946
Part#: C15476-052
Back Ordered
$ 194.99 USD
Free Shipping on orders $49 and up
Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!
Show More Show Less
Genuine BMW - Corporate Logo
T#:222835
Part#: 11127645173
Back Ordered
3% off MSRP $ 693.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 671.99 USD
3% off MSRP
$ 693.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 671.99 USD
Genuine BMW replacement cylinder head valve cover with built in PCV valve. Replacement restores smooth idle when the PCV valve has failed. Includes inner and outer gaskets between the valve cover and the engine.
Show More Show Less

URO Rubber Engine Mount - Left
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:2423589
Part#: 22116787659
Back Ordered
$ 60.99 USD
Free Shipping on orders $49 and up


URO Rubber Mounting Left -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F36


OEM Rein Turbocharger Oil Supply Line - BMW B46/B48 2.0L
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:32748261
Part#: 11428487371
In Stock at Vendor
$ 57.99 USD
Free Shipping on orders $49 and up
This metal supply line supplies oil to the turbocharger, keeping it lubricated and regulating temperatures. If yours has developed a leak, replace it as soon as possible to prevent oil loss and damage to the turbocharger.
Show More Show Less
Beru - Corporate Logo
T#:14982199
Part#: 121200405516KT
Back Ordered
$ 95.99 USD
Free Shipping on orders $49 and up
$ 95.99 USD
Free Shipping on orders $49 and up
Nostrum - Corporate Logo
T#:26771703
Part#: H750-1605
Back Ordered
$ 2,199.00 USD
Free Shipping on orders $49 and up
WHP potential on Gasoline: 1000 WHP* (Calculated assuming 24 MPa fuel pressure and 328 g/(kW/hr) WHP potential on E85: 730 WHP* (Calculated assuming 24 MPa fuel pressure and 328 g/(kW/hr) Flow Rate: 20.2 g/s @ 100 bar Flow rate increase over Stock:85% Max Operating Pressure: 250bar / 25MPa / 3625psi Tune required?: Yes Recommended Tuning Suite: Ecutek & Bootmod3
Show More Show Less


Pure Turbos - Corporate Logo
T#:8076767
Part#: PUR-TUR-B58-012
In Stock
$ 3,107.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,107.00 USD
$ 3,107.00 USD
Looking to upgrade your turbo? Pure Turbos now offers their PURE800 B58 Turbo Upgrade kit! Pure Turbo's PURE800 turbo kit is designed to support 700+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW both on the street and on the track, without having to spend the high prices needed to break the quadruple-digit power threshold.
Show More Show Less
Dinan - Corporate Logo
T#:403061
Part#: D-310-0110A
Back Ordered
Sale - Save 10% $ 1,899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,709.96 USD
Free Shipping
Sale - Save 10%
$ 1,899.99

This product was last offered at the strikethrough price on
07-31-2026

$ 1,709.96 USD
Free Shipping

For the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your EWG N55 engine. The compressor wheel inside the turbocharger is increased in size allowing ~30% greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency.These are fully cast turbos that are manufactured to Dinan specifications along with an upgraded thrust system over the stock turbo to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with DINANTRONICS Stage 4, as well as Dinan’s intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended. 

Benefits of the Dinan Big Turbo for the EWG N55 Engine:

  • Fully cast turbo that is manufactured to Dinan specifications with an upgraded thrust system thereby avoiding lengthy turnaround times caused by a core exchange program. 
  •  Larger billet compressor/impeller wheel that allows ~30% greater flow over stock which then enables additional boost to be realized while retaining efficiency.
  • Turbo assembly is compatible with electric wastegate vehicles only.
  • Peak power: 445 HP @ 6000 RPM and 455 ft-lbs @ 3000 RPM and a max gain of 128 HP @ 6000 RPM and 113 ft-lbs @ 6000 RPM when coupled with other Dinan Performance upgrades. (Data from F22 M235i.) 448 HP @ 6500 RPM and 417 ft-lbs @ 3000 RPM and a max gain of 152 HP @ 6500 RPM and 123 ft-lbs @ 6500 RPM when coupled with other Dinan Performance upgrades. (Data from F32 435i. Other variants may differ.) 
  •  Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). 
  • Includes o-rings and gaskets needed for complete installation on a RWD vehicle only. If installing on an xDrive vehicle Dinan P/N D313-0117 is required for additional installation hardware.
  •  Factory matching new car warranty (4yr/50k) when run in Dinan specification.
  • 50 State Emissions legal; CARB EO # D-176-49.
Show More Show Less