Search | Turner Motorsport

Acexxon Horizontal Slat Rear Reflectors, Gloss Black - F80 F82 M3 M4 ...

T#:558340

Part#: R15-1-1000-01-G

Ships in 3 Business Days

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Acexxon's horizontal slat rear reflectors allow you to ditch the unattractive stock rear reflectors on your M3 or M4, giving your vehicle a more sporty look. Goes great with black grilles!

Air Lift Performance 3H Digital Air Management

T#:384243

Part#: 27695

In Stock at Vendor

$ 2,578.99 USD

Add to Wish List

Qty

$ 2,578.99 USD

Add to Wish List

Introducing the revolutionary Air Lift Performance 3H Height + Pressure Air Suspension Control System for BMW enthusiasts from Turner Motorsport. After three years of meticulous development and testing, Air Lift has created their most advanced product yet.

Combines pressure-based control with ride-height sensing technology for enhanced performance
Features a brilliant TFT color display for intuitive control and monitoring
Mobile app compatibility allows for easy adjustment of ride height and system settings via Bluetooth
State-of-the-art manifold with a 32-bit processor for precise control over all four corners of your BMW
Improved height sensor arm design for increased durability and longevity
Show mode feature enables height management while the vehicle is off

Kit Features:

Height + Pressure 3/8" Manifold
Air Lift Black Anodized Aluminum Display
Fully Integrated Wiring Harness That Also Incorporates Compressor Power
Necessary Fittings, Hardware, and Connectors For a Complete Install
Air Lift Automatically Draining Water Trap
60ft of 3/8" Air Line
3H Includes Rotational Height Sensors, Wiring, and Linkages
FREE Smart Phone App Which Works on Both iPhone and Android Integrated Into the Manifold, No Extra Module to Buy! Both Iphone and Android app are currently available

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

The Original California Mini Dash Duster - Wooden Handle

T#:584591

Part#: 62447

Ships in 10 Business Days

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Half size, but packing the same detailing capabilities of its bigger brother. Ideal for dashboards and vents.

Vorsteiner V-FF 103 Flow Forged Wheel Set for F8X M3/M4, F87 M2 ...

T#:338879

Part#: TMS207602

Ships on Dec 28, 2026

Starting at $ 2,200.00 USD

Add to Wish List

Starting at $ 2,200.00 USD

Add to Wish List

M3/M4 V-FF 103 19" Wheel Set
Vorsteiner V FF 103 wheels have been meticulously designed for and tailored to current BMW styling. Some of the factory wheels are a nice complement to BMW's styling but fail to really emphasize and amplify the F30's sharp edged lines. The V-FF 103 wheels very closely resemble the Vorsteiner VSE-003 and VTM-352 forged wheels. Vorsteiner is on the cutting edge of BMW styling enhancements and their new award-winning Flow Forged wheels are in a class of their own. Vorsteiner aero upgrades and wheels have been featured on many of our latest project and show cars. The V FF wheels strike all the right chords for style, fitment, technology, and quality.

On our F30 and F80 project cars we experimented with several wheel designs and sizes. Both chassis are begging for a large wheel that makes a dominating presence. The 20" V-FF 103 is our favorite sizing thanks to its powerful visual punch but 19" is also available and offers more tire choices. Ride quality is improved with some 19" tires compared to 20". Both sizes come in staggered widths of 9.5" front and 10.5" rear with aggressive offsets that negate the need for spacers. The wheels sit right to the fender lip. The face of each wheel has been tailored to emphasize the muscular stance of the M3/M4. The front wheels have a moderate concave dish and the rear wheels have a deep concave inset. Sculpting of the wheel spokes ensures compatibility with iron and composite brakes. These have been meticulously designed and engineered to give a strong, muscular stance without going over the edge.

Three gloss metallic colors are available to tie into your car's palette - Mercury Silver, Carbon Graphite, and Mystic Black. Each color can complement the rest of the trim on your car. Use the Mystic Black to tie in together with your satin black grilles and trim. Or the Mercury Silver can really pop when used on a black or grey body color and matte black trim.

The V-FF 103 is part of Vorsteiner's new Flow Forged wheel series. Until recently, their high quality wheel line was made up exclusively of forged alloy options whose fitment, quality and beauty set the bar for high end wheels. The Flow Forged wheels use a manufacturing process similar to casting but with the strength of a fully forged wheel. The final product is light weight but very strong and the V-FF wheels are fully tested and certified to rigorous safety standards. The manufacturing process is the latest in advanced wheel production but still less expensive than a fully forged wheel so you get all of the attributes of a forged monoblock wheel at a third of the price!

Example Vorsteiner V-FF 103 Wheel and Tire Set:

F: 19x9.5" with 275-285 tire

R: 19x10.5" with 275-305 tire
These Vorsteiner Wheels fit the following BMWs:
2015+ F80 M3 - Sedan
2015+ F82 M4 - Coupe
2015+ F83 M4 - Convertible

Show More Show Less

18" SM-10 APEX Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19329479

Part#: SM10188535SQ

Back Ordered

Starting at $ 1,696.00 USD

Add to Wish List

Starting at $ 1,696.00 USD

Add to Wish List

Apex SM-10 18x8.5" ET35 Wheel Set Apex 8.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

EVO Series Digital Volt Gauge - 8-18v

T#:389625

Part#: 216EVOWGVO

Ships in 1 Business Day

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Volt Gauge (8-18v)
Instructions
Mounting hardware
Decals
Dual color display (Green or White)

Show More Show Less

Universal Oil Drain Splash Shield

Only models using circular under body access

T#:19197292

Part#: 83305A7B9D3

Ships in 7 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Prevents oil spills during oil drain plug removal

Snow Performance 1/8NPT-1/4 Quick Connect Fitting

T#:2317850

Part#: SNO-82082R

In Stock at Vendor

23% off MSRP $ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD

Add to Wish List

Qty

23% off MSRP

$ 12.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 9.99 USD

Add to Wish List

Brembo Calipers Lotus, A, C, F - Race Brake Pad Set - Hawk DTC-60 ...

T#:16488

Part#: TMS16488

Ships on Nov 9, 2026

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

The Hawk DTC (Dynamic Torque Control) compound offers the highest friction coefficient of any Hawk pad. The DTC pads offer extremely high torque with aggressive controllable initial bite, superior release and torque control characteristics. These DTC-60 pads have less torque than the similar DTC-70 pads.

Show More Show Less

Brembo Red Color-Coated Steering Wheel Trim - F80 M3 F82 M4 F10 M5 LC...

T#:396163

Part#: BM-0183-BR

Ships in 7 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

It is difficult to improve upon perfection - we love BMW interiors as much as you do, but we've found a way to make them more personal. Our steering wheel trims are OEM spec zinc cast and powdercoated to perfection. We recommend professional installation.

This product fits the following BMWs:
2016+ F87 M2
2015+ F80 M3
2010-2016 F10 M5 LCI
2012+ F06 / F12 / F13 M6

Show More Show Less

AWE SwitchPath Catback Exhaust - Chrome Silver (F8X M3/M4)

2X Entries Into Our F80 M3 Sweepstakes

T#:4799673

Part#: 3025-42070

Ships on Nov 11, 2026

$ 2,775.00 USD

Add to Wish List

Qty

$ 2,775.00 USD

Add to Wish List

AWE has one vision: To unlock performance. AWE has a unique facility where every step, from design to production, is completed within their facilities. This results in state-of-the-art exhausts with unparalleled quality control and top tier performance. The SwitchPath Catback Exhaust for the F8x M3/M4 from AWE offers a perfectly balanced and tuned exhaust that will deliver power when needed without droning at cruising speeds. By replacing the factory muffler, you will uncover the pure sound of the S55 engine. This exhaust is perfect for those who want a more aggressive response when getting on the throttle, but don't want to wake up the neighbors. The SwitchPath™ Technology utilizes factory valving and M-Sport button to adjust tone on the fly. Other Features Include: Max gains of 20 hp and 31 ft-lbs of torque at the crank Clean, non-raspy S55 tone Handcrafted from 3” CNC mandrel-bent, U.S.-made .065” wall T304L stainless steel Precision-engineered integrated X-pipe Chrome Silver Finish Direct bolt on, no cutting Perfect fitment guaranteed AWE No CEL guarantee Lifetime warranty Proudly engineered, designed, and manufactured in-house at AWE

Show More Show Less

Nostrum Stage 2 DI Injectors - S55/N55

T#:9609825

Part#: H703-1257

Special Order: No Guaranteed ETA

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.

Show More Show Less

POR15 Absolute Coatings Fuel Tank Sealer

T#:1575841

Part#: POR49216

Ships in 6 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.

Show More Show Less

Wagner Tuning High Flow 200 Cell Catted Downpipe - F8X S55

T#:587590

Part#: 500001023

Ships in 1 Business Day

$ 2,290.00 USD

Add to Wish List

Qty

$ 2,290.00 USD

Add to Wish List

A higher flowing catalytic substrate for dramatically improved throttle response and torque.

Water Methanol Controller (Boost) - VC-30

T#:21308475

Part#: SNO-60400

In Stock at Vendor

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.

Show More Show Less

Autotecknic Dry Carbon Canard Set - F80 M3 / F82/ F83 M4

T#:21472879

Part#: ATK-BM-0087

Ships in 7 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Canards look great and increase downforce at high speeds. The added downforce from the canards stabilizes your car during hard cornering by increasing traction - making your days on the track more fun. This product fits the following BMWs: 2015+ F80 M3 2015+ F82 F83 M4 M4 GTS

Show More Show Less

EVO Aero Carbon Fiber Decklid Spoiler - M3

T#:396607

Part#: 4103BMV

Special Order: No Guaranteed ETA

$ 995.00 USD

Add to Wish List

Qty

$ 995.00 USD

Add to Wish List

Show off the racing heritage of your BMW with this Vorsteiner carbon fiber rear spoiler! This deck spoiler mounts to deck of your factory trunk to provide a cleaner and more aggressive look.

StopTech Calipers ST22 - Street Brake Pad Set - Hawk Ceramic ...

T#:16527

Part#: TMS16527

Ships on Nov 9, 2026

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

The Ceramic pads are perfect for drivers who don't want the standard replacement pad but want a longer life from them.

VTT Wireless Plug & Play Line Lock Kit - BMW F22/23 F3X F8X G2X G8X, ...

2X Entries Into Our F80 M3 Sweepstakes

T#:41965005

Part#: VTT-WIRELESS-LL

Ships in 10 Business Days

$ 629.99 USD

Add to Wish List

Qty

$ 629.99 USD

Add to Wish List

VTT now offers a truly plug-and-play line lock kit for select BMW vehicles that does NOT require running wiring inside the car, mounted switches, holes in the dash, etc. VTT's newly designed and released line lock kits utilize a 40amp wireless remote control switch with four different modes, allowing you to tailor your line lock setup exactly as you prefer.

Show More Show Less

CTEK PRO25SE

T#:6476041

Part#: 40-327

In Stock at Vendor

$ 604.99 USD

Add to Wish List

Qty

$ 604.99 USD

Add to Wish List

The PRO25SE is an innovative, versatile, and highly efficient 25A battery charger and power supply.

1-1/4" Round Telescopic Magnifying Mirror With Pocket Clip

T#:641409

Part#: 2840D

Ships in 2 Business Days

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Perfect for inspecting hidden areas

Hella Auxillary/Universal Lamp Kit

T#:367295

Part#: UN6207110

Ships in 1 Business Day

$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

HELLA, a family-owned independent company, innovates and advances automotive lighting by making everything bigger and brighter. These driving lamps are sure to keep the road ahead lit, while giving your BMW the iconic look of HELLA lighting.

Show More Show Less

345x28 Brembo Brake Kit Slotted Rotors (Pair - Left and Right) ...

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:16463

Part#: BREMBO-345-28-SL

In Stock

$ 1,130.00 USD

Add to Wish List

Qty

$ 1,130.00 USD

Add to Wish List

Brembo replacement friction rings (no hat), only for a Brembo Brake Kit.

TL/SLX Frame Extensions - Pair

T#:1965125

Part#: 5620291

Ships in 4 Business Days

$ 410.00 USD

Add to Wish List

Qty

$ 410.00 USD

Add to Wish List

Increases the lift point spread of the 5000TL, 7000TL, BL-5000SLX and BL-7000SLX by 6 inches

Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit...

T#:21308451

Part#: 40069-2

In Stock

$ 742.99 USD

Add to Wish List

Qty

$ 742.99 USD

Add to Wish List

Direct port injection plate with 1.5GPH nozzles for clean WMI installs Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. Hardlines plumbed to distribution rail 6 1.5GPH Nozzles installed in plate *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning

Show More Show Less

Permatex Liquid Electrical Tape

T#:2958746

Part#: 85120

Ships in 1 Business Day

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Weatherproof protectant for wiring and electrical connections.

Prosport EVO Series Digital Wideband Air Fuel Gauge Kit - 10.0:1 To 2...

T#:389623

Part#: 216EVOWGAFRWB4.9

Ships in 1 Business Day

$ 241.99 USD

Add to Wish List

Qty

$ 241.99 USD

Add to Wish List

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

AFR digital Gauge
Bosch 4.9 5 wire heated O2 sensor
Weld in Bung
Instructions
Wiring harness(Gauge to O2 sensor) 10 feet long
Plug and play wiring harness
Decals
0-5 volt output signal for data logging

Show More Show Less

MTX-A: 30 PSI Vacuum / Boost Gauge

T#:31589384

Part#: INN3908

In Stock at Vendor

17% off MSRP $ 287.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.00 USD

Add to Wish List

Qty

17% off MSRP

$ 287.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 239.00 USD

Add to Wish List

Dust Caps For Quick-Coupler Fittings Male & Female - Set of 8 ...

T#:403151

Part#: 5325768

Ships in 4 Business Days

$ 36.00 USD

Add to Wish List

Qty

$ 36.00 USD

Add to Wish List

Hydraulic dust caps are included with every purchase of the QuickJack portable car lift system, and additional sets can be purchased here.

H&R 3mm Wheel Spacers (Pair) - F30, F10 M5, F06/F13 M6, F32

We Price Match - Give Us A Call or Chat!

T#:174122

Part#: 0675726

Ships in 3 Business Days

10% off MSRP $ 89.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.96 USD

Add to Wish List

Qty

10% off MSRP

$ 89.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.96 USD

Add to Wish List

3mm = .12"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are recommended.
Hubcentric = Yes*, the original hub lip still protrudes through the spacer

H&R's 3mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
* - To avoid vibration, 3mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result.

Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2011+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe

Show More Show Less

APEX EC-7 18" Staggered Wheel Set - Satin Black

2X Entries Into Our F80 M3 Sweepstakes

T#:387444

Part#: EC71810251144BKT

Back Ordered

$ 1,716.00 USD

Add to Wish List

Qty

$ 1,716.00 USD

Add to Wish List

Specifications: Color - Satin Black Size Front - 18x10" ET25 Size Rear - 18x11" ET44

Front Brembo GT 6 Piston Big Brake Kit (405x34mm)

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:380948

Part#: 1N1.9531A2

Ships in 3 Business Days

$ 5,295.00 USD

Add to Wish List

Qty

$ 5,295.00 USD

Add to Wish List

The Brembo GT Big Brake Kit utilizes some the most high tech materials available on the market today. Using their 50+ years of knowledge, Brembo's products have been engineered to perform both on and off the track. Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Kit features: 6 piston billet aluminum calipers in red 2 piece vented rotors (405x34mm), drilled High performance pads with application specific friction materials Homologated metal braided lines with adapters Quality anti noise hardware The GT big brake kit is designed for optimal performance on and off the track Brembo is so sure you'll be satisfied they've included a two year warranty from any manufacturing defects which may have been made in the process of production. All claims due to manufacturer error must be made by original purchaser within 60 days of its discovery, and must be made no later than 2 years from the purchase date. Offering everything from OEM pads and rotors, performance replacements, big brake kits, or even the fluids and tools to get the job done right, ECS Tuning is your one-stop-shop for all things BMW braking.

Show More Show Less

40 Pc MM Tap & Die Set

T#:1855962

Part#: W4002DB

Ships in 1 Business Day

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

NC, NF and NPT sizes.

KW 2-Way Coilover Kit - Clubsport - F80 M3, F82 M4 - 3 Bolt Mount ...

For Vehicles produced before 01/15 production date with EDC

T#:206127

Part#: 352208AN

In Stock

$ 5,294.00 USD

Add to Wish List

Qty

$ 5,294.00 USD

Add to Wish List

Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs KW Clubsport coilovers was developed for F80 M3 & F82 M4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track. KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times. Performance setup for the racetrack Height adjustable coilovers - Front - 15-40mm, Rear - 20-45mm Dampers in compression & rebound forces independently adjustable Use of high performance linear race springs: Front 575 lbs/inch, Rear 800 lbs/inch. Stainless steel technology "inox-line" Includes front camber plate mounts Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. EDC must be disabled using the KW EDC Cancellation Kit or a similar unit. This is a direct install for cars without the factory EDC. Choose 2-way (Rebound/Compression) adjustable shocks or 3-way(Rebound/Low-Speed Compression/High-Speed Compression) from options below. KW Clubsport Development and Testing This item fits the following BMWs: 2015-1/2015 F80 BMW M3 2015-1/2015 F82 BMW M4

Show More Show Less

Permatex The Right Stuff Gasket Maker – BLACK

T#:2958751

Part#: 25223

Ships in 1 Business Day

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Make leak-proof gaskets and return equipment to service immediately! Permatex premier instant gasket maker was designed as a replacement for conventional gaskets.

Loctite Anti-Seize Stick - 20 Grams

T#:376161

Part#: 37616

In Stock at Vendor

$ 9.17 USD

Add to Wish List

Qty

$ 9.17 USD

Add to Wish List

Copper based compound

POR-15 Top Coat Chassis Black 14 Oz Spray

T#:1575835

Part#: POR45918

Ships in 6 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Quick and easy dress your chassis up with POR-15

Mahle Air Filter - F06, F10, F12, F13, F80, F82, F83

T#:381087

Part#: 13727843284

Ships in 1 Business Day

$ 33.38 USD

Add to Wish List

Qty

$ 33.38 USD

Add to Wish List

For cylinder bank 1

Maad Maxx Rear Exhaust Section 3 Can Valve - With Black Tips ...

T#:6258362

Part#: 11-073B

Ships in 3 Business Days

$ 2,440.99 USD

Add to Wish List

Qty

$ 2,440.99 USD

Add to Wish List

The Active Autowerke F8X rear exhaust was carefully engineered to eliminate the unflattering sound of the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance.

Seal Puller

T#:1809137

Part#: W1219

In Stock at Vendor

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Leverage works for you.

APEX ARC-8 18x9.5" ET35 Square Track Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:387010

Part#: ARC8189535X4

Ships in 5 Business Days

Starting at $ 1,596.00 USD

Add to Wish List

Starting at $ 1,596.00 USD

Add to Wish List

Apex ARC8 18x9.5" ET35 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

GTS Designe Carbon Fiber Front Lip - F8x

T#:21834335

Part#: F8XGTSCFLIP

Ships in 5 Business Days

$ 700.00

This product was last offered at the strikethrough price on
08-18-2026

$ 560.00 USD

Add to Wish List

Qty

$ 560.00 USD

Add to Wish List

Looking to change the character of your BMW? This carbon fiber front lip is a great way of getting it done. Carbon fiber means no need to paint, this lip will add a beautiful and sporty appearance without being overstated. Constructed of high-quality carbon fiber, this front lip is sure to impress in every way. Add some unique styling and a touch of carbon fiber to your car

Show More Show Less

380x34 Brembo Brake Kit Slotted Rotors (Pair - Left and Right) ...

2X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes!

T#:6476050

Part#: 906538KT

Ships in 3 Business Days

$ 1,380.00 USD

Add to Wish List

Qty

$ 1,380.00 USD

Add to Wish List

Brembo replacement friction rings (no hat), only for a Brembo Brake Kit.

3D Design Carbon Fiber Front Lip Spoiler - F8X M3/M4

T#:390472

Part#: 3101-28211

Ships in 3 Business Days

$ 2,195.00 USD

Add to Wish List

Qty

$ 2,195.00 USD

Add to Wish List

This 3D Design front lip spoiler was designed to provide an aggressive, individual stylistic touch to your BMW without being overbearing. Constructed from high-quality carbon fiber, this part attaches easily and accentuates your BMW's natural body lines, creating a high-class performance look. Professional installation is recommended.

Show More Show Less

Eventuri Kevlar Engine Cover (Red) - F8X M3/M4

T#:399961

Part#: F8XM-KV-ENG-R

Ships in 5 Business Days

$ 895.00 USD

Add to Wish List

Qty

$ 895.00 USD

Add to Wish List

When it comes to styling a vehicle the proper look is one that compliments the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. Instead of simply offering black carbon and yellow kevlar that has become the norm, Eventuri has stepped things up by offering their carbon/kevlar accessories in multiple colors. Now you can choose between Blue, Red, Orange and Yellow weave to further set your ride apart from the pack.

Show More Show Less

Riv Nut Installation Tool

T#:638963

Part#: T05

Ships in 6 Business Days

$ 12.00 USD

Add to Wish List

Qty

$ 12.00 USD

Add to Wish List

Having trouble installing riv nuts? Go ahead and grab yourself this riv nut installation tool to make your project a whole lot easier!

H&R 5mm Wheel Spacers (Pair) - F30, F10 M5, F06/F13 M6, F32

We Price Match - Give Us A Call or Chat!

T#:174123

Part#: 1075726

Ships in 3 Business Days

10% off MSRP $ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD

Add to Wish List

Qty

10% off MSRP

$ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD

Add to Wish List

5mm = .20"
5/120 bolt pattern; 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes*, the original hub lip still protrudes through the spacer

H&R's 5mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels.

This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
* - To avoid vibration, 5mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result.

Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2012+ F10 BMW M5
2012+ F12 BMW M6
2013+ F06 BMW M6 Gran Coupe

Show More Show Less

EVO Series Digital Water Temperature Gauge - 80-280°F

T#:389626

Part#: 216EVOWGWT.F

Ships in 2 Business Days

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Water Temperature Guage (80-280 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Green or White)

Show More Show Less

Project Cars

SELECT YOUR BMW

Showing 8365 results for ""

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results