BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6

T#:398705

Part#: FB647/20

In Stock at Vendor

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

BMW F8X DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Stock Turbos ...

T#:13924836

Part#: DO88KIT205SOEM

Ships in 4 Business Days

$ 472.99 USD

Add to Wish List

Qty

$ 472.99 USD

Add to Wish List

BMW F8X DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Stock Turbos is engineered to enhance your vehicle's performance by providing a 33% larger flow area compared to the stock inlet pipe. This design allows the engine to breathe more efficiently, reducing backpressure and enabling the turbo to intake more air. The result is increased power and improved overall performance.

Increased Flow: 33% larger flow area for superior air intake.
Enhanced Performance: Reduces backpressure, allowing the turbo to operate more efficiently.
Improved Power: More air intake translates to better engine power and responsiveness.
Precision Engineering: Designed specifically for BMW F8X M2C/M3/M4 models with stock turbos.
Easy Installation: Direct fitment for a hassle-free upgrade.

Upgrade to the DO88 Turbo Inlet Pipe for significant performance gains and a more responsive driving experience.

Show More Show Less

FTP Inlet Pipe Kit - BMW S55

T#:598513

Part#: SG71448

Ships in 6 Business Days

$ 330.00 USD

Add to Wish List

Qty

$ 330.00 USD

Add to Wish List

Enhance the performance of your BMW with the S55 Turbo Intake Pipe. Designed to address the limitations of the original pipe, this upgrade is essential for boosting the turbocharger or increasing boost value. By improving airflow into the turbo, this intake pipe enhances turbo response, increases airflow, and reduces turbo lag. Enjoy increased flow and a direct OEM replacement with this 3-ply silicon coupler intake pipe.

Benefits:

Improves turbo response
Increases airflow
Reduces turbo lag
Direct OEM replacement for easy installation

Show More Show Less

CSF Performance Top Mount Aluminum Charge-Air-Cooler - Raw Finish - B...

2X Entries Into Our F80 M3 Sweepstakes

T#:401241

Part#: 8082R

In Stock

$ 1,695.00 USD

Add to Wish List

Qty

$ 1,695.00 USD

Add to Wish List

CSF have released their first-to-market cast endtank designed top-mount intercooler for the S55 3.0L engine.This liquid to air cored cooler from the ground up, utilizing multiple air dividers cast into the hot/cold side endtanks for optimized air flow. After development, extensive testing and analysis was performed to make sure they could get the highest performance possible from their design.

Show More Show Less

Forge Motorsport Valve Service Kit

T#:28271173

Part#: FMDV004S

Back Ordered

Sale - Save 12% $ 23.99

This product was last offered at the strikethrough price on
09-18-2026

$ 21.18 USD

Add to Wish List

Qty

Sale - Save 12%

$ 23.99

This product was last offered at the strikethrough price on
09-18-2026

$ 21.18 USD

Add to Wish List

BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm)

10X Entries Into Our F80 M3 Sweepstakes

T#:376708

Part#: 003402ECS01A-03

In Stock

Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 23.24 USD

Add to Wish List

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

Provides a secure and leak-free connection
Engineered for durability and flexibility
Straight design for easy installation
Perfect fit for BMW and MINI vehicles

Show More Show Less

Silicone Coupler - Straight 3 5/8" (92mm)

10X Entries Into Our F80 M3 Sweepstakes

T#:377483

Part#: 003402ECS01A-07

In Stock

Sale - Save 40% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 40%

$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 23.99 USD

Add to Wish List

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

Enhances vehicle performance
Durable construction for long-lasting reliability
Specifically designed for BMW vehicles

Show More Show Less

Mishimoto Performance Intercooler Heat Exchanger - F8X M2 M3 M4 S55 ...

CARB certified for sale in all 50 states

T#:637356

Part#: MMHE-F80-15

EO#: D-759-13

Ships in 3 Business Days

$ 725.99 USD

Add to Wish List

Qty

$ 725.99 USD

Add to Wish List

Improve the cooling capacity for your 2015–2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is a means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of M’s packs quite a punch thanks to the A2W system. While the BMW engineers laid the foundation for dissipating heat from the intercooling system, we still saw some room to improve on their design. We started by eliminating any bits of plastic and promptly replaced the end tanks, including the inlet and outlet ports, with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150 mm, totaling in a 60% increase in core volume and a 180% increase in fin surface area. The end result of our improvements is a 10°F drop in global intercooling temperatures over the stock unit. Size isn’t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4’s cooling stack, it’s susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with an optional steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT-equipped M's. Finally, our 2015–2020 BMW F8X M3/M4 Performance Heat Exchanger includes the Mishimoto Lifetime Warranty for a worry-free install. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition 10°F drop in global intercooler coolant temperatures over stock 60% increase in core volume 180% increase in external fin surface area Increases intercooler coolant capacity by 0.6 gallons Full aluminum, TIG-welded construction Dual-pass design for maximum cooling Variable fin-pitch design for improved airflow to DCT cooler Includes optional stone guard for maximum protection against road debris Mishimoto Lifetime Warranty Included: (1) Performance Heat Exchanger (1) Stone Guard (1) Magnetic Drain Plug Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Injen Evolution Intake F80, F82, F83, F87 - S55

T#:5802148

Part#: EVO1102

In Stock at Vendor

$ 875.99 USD

Add to Wish List

Qty

$ 875.99 USD

Add to Wish List

Injen is proud to be introducing the all new Evolution sealed cold air intake system for the 2015-2018 BMW M3/M4! This intake has been designed using the some of the most up-to-date engineering tools and techniques to produce a top notch kit. This intake system is on a whole new level with one-piece sealed housings that utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the Injen SuperNano-Web Dry air filters in place. This cold air intake also has our distinctive sight window that not only allows easy inspection of the air filters, but it really pops under your hood too. This kit ships complete with premium hardware to provide you the absolute best intake kit available for your BMW M3 and M4. Features: Dyno Proven gains of up to 22 hp and 27 lb-ft. of torque Designed to work with the stock calibration Aggressive intake growl under acceleration Durable Roto-Molded Polyethylene tubes and housings Twist-Lock Technology* to securely integrate the air filter to the housing Reinforced automotive grade silicone couplers Fully serviceable Injen SuperNano-Web dry air filter Replacement air filter # X-1097-BB Stainless steel band clamps with inner protective liner Aggressive under hood appearance while maintaining an OE fit Injen clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances. Made in Pomona California, USA Injen Technology Limited Lifetime Warranty

Show More Show Less

Color Matched Charge Pipe Kit - Yas Marina Blue

T#:7640385

Part#: MMICP-F80-15CYMB

In Stock at Vendor

$ 495.99 USD

Add to Wish List

Qty

$ 495.99 USD

Add to Wish List

Elevate both the performance and aesthetics of your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color-matched charge pipe kit. The air-to-water intercooler is pivotal in maintaining low intake air temperatures (IATs), and the stock charge pipes can be a weak link in the system. When pressure mounts, factory pipes may develop splits at the plastic welds near the turbo or even burst along the seam, resulting in frustrating boost leaks. Crafted with durable, full aluminum construction, the Mishimoto F8X M3/M4 Charge Pipes undergo meticulous TIG-welding to ensure a secure channel for the S55 engine's boost. Engineered with optimal airflow in mind, these charge pipes feature a uniform shape from turbo to intercooler without compromising fitment. With the backing of the Mishimoto Lifetime Warranty, the 2015+ BMW F8X M3/M4 Charge Pipes promise a lifetime of exceptional performance and style enhancement for your vehicle.

Show More Show Less

Black Series Momentum Carbon Fiber Cold Air Intake System w/ PRO 5R -...

T#:557737

Part#: 54-76305-CF

Ships in 3 Business Days

$ 1,532.00 USD

Add to Wish List

Qty

$ 1,532.00 USD

Add to Wish List

This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone inverted top filter has a large 3-1/2" round flange and is 6-1/2" tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.

Show More Show Less

BMS Performance Intake - Red Filters - F8X M2/M3/M4 S55

T#:16175682

Part#: BMSS55INT

Ships on Oct 20, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS

Show More Show Less

BMW F8X S55 CTS Turbo Chargepipe

T#:584988

Part#: CTS-IT-288

Ships in 7 Business Days

Sale - Save 15% $ 329.99

This product was last offered at the strikethrough price on
09-29-2026

$ 280.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 329.99

This product was last offered at the strikethrough price on
09-29-2026

$ 280.49 USD

Add to Wish List

The factory S55 chargepipe is prone to failure especially as the mileage starts to add up. This replacement chargepipe from CTS Turbo installs easily and holds stock and increased boost levels with ease.

Show More Show Less

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

T#:5788180

Part#: BMS-F-S55HE

Ships on Oct 20, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA

Show More Show Less

Dinan Carbon Fiber Intake System - F8X M3/M4

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389284

Part#: D760-0045

Back Ordered

Sale - Save 10% $ 1,699.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,529.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,699.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,529.96 USD

Add to Wish List

Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan S55 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds into dual larger volume airboxes complete with larger cone filters that elicit a slightly more audible and sporty tone over its stock counterpart.

Show More Show Less

Vargas Turbo Silicone Charge pipes - Blue - S55

2X Entries Into Our F80 M3 Sweepstakes

T#:390441

Part#: VPP-S55-SIL-1B

Ships in 10 Business Days

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

Looking to get the most efficient turbocharger operation out of your S55 powered BMW? The best way to do this is to remove all restriction from the inlet, and charge tract. The factory charge pipes are poorly designed due to being completely flattened coming out of the turbos, before the intercooler. These VTT S55 silicone charge pipes get rid of those restrictions and provide a full 2″ ID from the turbochargers into the intercooler, as well as not allowing any heat soak to occur like other aluminum pipes on the market. The VTT charge pipes are a full 7 ply wire reinforced silicone, with an extra layer of silicone on the interior, tested to over 150psi. They are available in 3 colors. Black with a Blue interior layer, Blue with a Red interior layer, and Red with a Black interior layer. These charge pipes fit all S55 powered BMW M3/M4’s.

Show More Show Less

MMX Performance Panel Air Filter Blue - S55/S63 (F-Chassis M cars) ...

Does not fit X5, X6, M8, or F90 M5

T#:4538188

Part#: MMR01-1002

Ships in 2 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Replacement performance panel air filter for your S55 or S63 engine. Upgrade your engines breathing capabilities with a simple to install air filter! MMX's performance air filter is constructed of cotton gauze and easily drops into the OE airbox. The result is excellent filtration properties, instant performance increase, and extra induction noise. Features Increased engine performance Improved induction noise Fits OE air filter housing Easy installation and completely washable

Show More Show Less

AWE S-FLO Carbon Intake - BMW F80 M3, F82/83 M4 S55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:589739

Part#: 2660-13038

Ships in 5 Business Days

$ 1,485.00 USD

Add to Wish List

Qty

$ 1,485.00 USD

Add to Wish List

A Fully Enclosed Carbon Intake. The S-FLO Carbon Intake from AWE is a fully sealed and enclosed design constructed from a 2x2 twill carbon, made with High-Grade UV to protect from yellowing. The engineers at AWE have increased airflow and unlocked performance from the S55 engine, for max gains of 12hp and 10ft-lbs of torque at the crank

Show More Show Less

Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55

CARB certified for sale in all 50 states

T#:637358

Part#: MMICP-F80-15

EO#: D-759-13

In Stock at Vendor

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition Full aluminum TIG-welded construction for maximum durability Unique cast midsection for perfect fitment between engine and air intake Includes bung for simple integration of methenol injection Designed for optimal airflow Includes matte black silicone couplers for a secure and stock-style connection to the intercooler Mishimoto Lifetime Warranty Included: (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Burger Motorsports Performance Intake - F8X M3/M4 S55

Not for sale or use in the state of California.

T#:556787

Part#: BMS-S55-INT

Ships on Oct 20, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

In BMW's with the S55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow intake tubes and dual inverted performance cone filters. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Show More Show Less

MMX Charge Pipe Kit - S55 F8x M2 Comp/M3/M4

T#:4552007

Part#: MMR02-1001

Ships in 2 Business Days

$ 715.99 USD

Add to Wish List

Qty

$ 715.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your S55 Powered F8x M2 Comp/M3/M4. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Three high-flow aluminum charge pipes with CNC leak-free connections Three silicone coupler hoses c-clips Jubilee clips

Show More Show Less

BMW S55 3.0L Silicone Charge pipes - Red

2X Entries Into Our F80 M3 Sweepstakes

T#:390442

Part#: VPP-S55-SIL-1R

Ships in 10 Business Days

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Enhance turbocharger operation efficiency with VTT S55 Silicone Charge Pipes for your BMW. These pipes remove restrictions in the inlet and charge air tract, ensuring a full 2" ID from the turbochargers to the intercooler. Unlike factory pipes, which restrict airflow due to flattening, VTT charge pipes optimize airflow. Constructed of 7-ply wire reinforced silicone, they withstand over 150psi and feature an additional silicone layer for reduced heat soak. Choose from three color options: Black with Blue interior, Blue with Red interior, or Red with Black interior. This kit includes 2 silicone charge pipes, 2 billet turbocharger outlet adapters, and stainless steel clamps for easy installation on all S55 powered BMW M3/M4's.

Benefits:

Eliminates restrictions for efficient turbocharger operation
Provides a full 2" ID from turbochargers to intercooler
Reduces potential heat soak with silicone construction
Durable design tested to over 150psi
Available in 3 color options: Black/Blue, Blue/Red, Red/Black

Show More Show Less

aFe Magnum FLOW Pro 5R OE Replacement Filter Set - BMW F80/82/83 M3/M...

T#:341319

Part#: 30-10238

Ships in 3 Business Days

20% off MSRP $ 255.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.00 USD

Add to Wish List

Qty

20% off MSRP

$ 255.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.00 USD

Add to Wish List

The PRO5R uses aFe's highest flowing filter media, which uses a light oil gauze to filter out dirt and particulates while allowing more air to flow to the intake. This is the best flowing filter, with the best performance gain. We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Show More Show Less

Carbon Fiber Intercooler Cover With Engraved Design - S55

T#:5567058

Part#: S55COVERWLOGO

Ships in 3 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

This version features S55 3.0L Bi-Turbo engraved into the cover. This carbon fiber intercooler cover is made from premium prepreg carbon fiber, cured using vacuum bag and autoclave

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

MAD BMW F80 F82 M3 M4 S55 Front Mount Intake

T#:56291052

Part#: MAD-119-RED

Ships in 6 Business Days

$ 369.00 USD

Add to Wish List

Qty

$ 369.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoop Set (Yellow) - F8X M3/M4

T#:5886933

Part#: 19.12.11XYEL

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4

T#:5886935

Part#: 19.12.11XBLK

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Blue) - F8X M3/M4

T#:5886934

Part#: 19.12.11XBLU

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4

T#:4662381

Part#: 19.12.11X

Ships in 8 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.

Show More Show Less

BMW F8X S55 3.0l Intercooler Pipes DO88

T#:13891829

Part#: TR240SS

Ships on Oct 22, 2026

$ 446.99 USD

Add to Wish List

Qty

$ 446.99 USD

Add to Wish List

BMW F8X S55 3.0L Intercooler Pipes DO88 are engineered to deliver exceptional performance and reliability for your S55 engine. Designed and tested rigorously by DO88, these intercooler pipes ensure optimal airflow and durability, enhancing your vehicle's breathing efficiency.

Enhanced Airflow: Provides 4% increased airflow compared to stock pipes, improving engine performance.
OE Engine Cover Compatibility: Allows for seamless installation with the OE engine cover.
High-Temperature Resistance: Built to withstand high temperatures and pressures, ensuring long-lasting reliability.
Top-Quality Construction: Manufactured by DO88, known for premium aftermarket components.

Upgrade your BMW F8X S55 with the DO88 intercooler pipes for superior performance and peace of mind.

Show More Show Less

DO88 Intake System - F8X M2C/M3/M4

T#:13891859

Part#: LF150SS

In Stock at Vendor

$ 1,246.99 USD

Add to Wish List

Qty

$ 1,246.99 USD

Add to Wish List

DO88's F8X intake is designed to pull cold air straight out from the front of the vehicle. This is because when the air filter is open in the engine, it allows the engine to pull warm air from the engine straight into the intake, causing a loss in power compared to cold air. The enclosed design with rubber gaskets allows you to make sure there are no leaks and that only the freshest of air is reaching your engine. With this upgrade, you could see up to +10 peak hp gain and 20+hp in mid-range rpm!

Show More Show Less

DO88 Turbo Inlet Pipe - F8X M2C/M3/M4 - Hybrid Turbo 54mm

T#:13924840

Part#: DO88KIT205SID54

Ships on Oct 22, 2026

$ 472.99 USD

Add to Wish List

Qty

$ 472.99 USD

Add to Wish List

Boasting a 33% larger flow area, this inlet pipe will let your engine breathe better than ever before! Designed to reduce backpressure, this lets the turbo take in more air giving you more power and better performance!

Show More Show Less

MST Performance Air Intake System - F8X S55

T#:585588

Part#: BW-M3401

Special Order: No Guaranteed ETA

$ 743.99 USD

Add to Wish List

Qty

$ 743.99 USD

Add to Wish List

Upgrade your stock S55 intake to the MST Performance intake system. By replacing the factory air intake systems, airflow is increased and overall temperatures are reduced. This intake features a unique design to allow for improved throttle response as well as an improved engine note. This intake system utilizes a heat shield that will help block the hot engine air, allowing the intake to deliver cooler, denser air. It includes all of the necessary hardware for install, making it a smooth and swift process. Also included is a 3" intake pipe. Maximizes airflow to engine Heat shield helps block hot engine air More aggressive and sporty induction sound Washable and reusable lifetime air filter Provides gains of 10-13 horsepower

Show More Show Less

FTP M-Power High Flow Air Filter - S55 F8x/S63 F1x

T#:5788173

Part#: GS55S63

Special Order: No Guaranteed ETA

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow

Show More Show Less

FTP Motorsport Charge Pipe Kit - V2 - F8X M3/M4/M2 Competition ...

T#:578679

Part#: SG71350

Ships in 1 Business Day

$ 470.00 USD

Add to Wish List

Qty

$ 470.00 USD

Add to Wish List

This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

VRSF High Flow Upgraded Air Intake Kit - S55

We Price Match - Give Us A Call or Chat!

T#:585202

Part#: 10801010

Back Ordered

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

This high flow upgraded air intake kit from VRSF replaces the restrictive OEM intake with a high flowing design. This design retains the OEM cold air ducting, and eliminates the upper portion of the OEM intake. This portion is very restrictive, especially in high RPM ranges. The high flow filter is cleanable and creates a more aggressive intake sound. The kit includes all of the hardware for installation, including couplers, clamps, and filters.

Show More Show Less

Garrett Powermax Performance Top Mount Intercooler - Black Powdercoat...

T#:2423534

Part#: 17517846235B

Back Ordered

$ 2,395.99 USD

Add to Wish List

Qty

$ 2,395.99 USD

Add to Wish List

Garrett Powermax™ direct fit performance charge air cooler for BMW's F8X M2C, M3, and M4 boasts a 47% larger core with dual pass coolant flow to help reduce intake manifold temperatures by an average of 10 degrees Fahrenheit. CFD optimized end tanks improve airflow through the core. An average increase of 12.4 horsepower and 4.9 lb-ft of torque were measured during back-to-back dyno pulls. This direct-fit performance intercooler installs in just over an hour and reuses the stock bolts, hoses, and clamps Features: Supports up to 980hp 47% larger core than stock Installs in stock location Cast aluminum end tanks Air-to-liquid design Bar-and-plate construction Weight: 14.10 lbs Size Specs: 7.2' x 9.8' x 3.6' | 183mm x 249mm x 92mm

Show More Show Less

VRSF Front Facing Air Intakes - S55

We Price Match - Give Us A Call or Chat!

T#:585034

Part#: 10801020

Back Ordered

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

Replace your restrictive OEM air intake with this high flow designed intake from VRSF. This intake kit places the filters directly behind the front grill, increasing induction sound and preventing heat soak from the radiant engine bay heat. The VRSF intake is constructed from mandrel bent 3" aluminum tubing and includes CNC billet aluminum MAF and vacuum flanges.

Show More Show Less

Carbon Fiber Intercooler Cover - S55

T#:5567057

Part#: S55COVERSMOOTH

Back Ordered

$ 115.00 USD

Add to Wish List

Qty

$ 115.00 USD

Add to Wish List

Add some carbon fiber flair to your S55 Engine Bay! This carbon fiber intercooler cover is made from premium prepreg carbon fiber, cured using vacuum bag and autoclave.

Garrett Powermax Performance Top Mount Intercooler - Silver Raw Finis...

T#:2423535

Part#: 17517846235S

Back Ordered

$ 2,265.99 USD

Add to Wish List

Qty

$ 2,265.99 USD

Add to Wish List

Garrett Powermax™ direct fit performance charge air cooler for BMW's F8X M2C, M3, and M4 boasts a 47% larger core with dual pass coolant flow to help reduce intake manifold temperatures by an average of 10 degrees Fahrenheit. CFD optimized end tanks improve airflow through the core. An average increase of 12.4 horsepower and 4.9 lb-ft of torque were measured during back-to-back dyno pulls. This direct-fit performance intercooler installs in just over an hour and reuses the stock bolts, hoses, and clamps Features: Supports up to 980hp 47% larger core than stock Installs in stock location Cast aluminum end tanks Air-to-liquid design Bar-and-plate construction Weight: 14.10 lbs Size Specs: 7.2' x 9.8' x 3.6' | 183mm x 249mm x 92mm

Show More Show Less

Genuine BMW Air Box Bump Stop Mount - 13717542860

T#:399461

Part#: 13717542860

In Stock

Sale - Save 35% $ 6.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4.51 USD

Add to Wish List

Qty

Sale - Save 35%

$ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 4.51 USD

Add to Wish List

This mounts the air box to the inside of the engine bay, preventing it from shaking and/or bouncing�around.

Genuine BMW Bump Stop
This item fits the following BMW Chassis:
E82 1M Coupe,E85 Z4M,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F02,F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Fits BMW Engines including:
N52,N52N,N54,N54T,N55,S54,S55
�

Show More Show Less

Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...

T#:25241773

Part#: MMCP-3035B

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

Precision Raceworks OE-Spec Intake Manifold O-Rings - 6 Pack - BMW N5...

T#:38229122

Part#: 501-0001

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

The Black Market Parts OE-Spec Intake Manifold O-Rings kit is made with Viton capable of withstanding all fuels (including e85) as well as oils. These o-rings are made to OE specifications and are a direct replacement for the seals found in your factory intake manifold. These o-rings are also used in other BMP products such as our N54/N55 Port Injection Kit, S55 Port Injection kit, N54 Performance Intake Manifold, and N55 Performance Intake Manifold.

Show More Show Less

K&N Air Filter Squeezable Recharge Kit

T#:4099

Part#: 99-5050

In Stock

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Cleaning and re-oiling your K&N filter will prolong its life and maintain K&N's performance advantage. You should clean your filter every year with water and K&N's cleaning solution and re-oil the filter every two years. K&N air fitlers come pre-oiled.

Show More Show Less

Dorch Engineering S55 Lift Kit - HPFP Upgrade - BMW F80 F82/83 F87 S5...

T#:55821716

Part#: DE-LK-2000AKT

In Stock

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

Dorch Engineering offers an upgraded vacuum pump, featuring their own upgraded cam within the pump assembly. This upgraded cam allows for a 38% increase in fuel flow out of the factory High Pressure Fuel Pump (HPFP).

Show More Show Less

4MM Silicone Vacuum Hose - Red - 9 Feet

T#:370918

Part#: VC04R

In Stock

Sale - Save 10% $ 15.99

This product was last offered at the strikethrough price on
09-18-2026

$ 14.36 USD

Add to Wish List

Qty

Sale - Save 10%

$ 15.99

This product was last offered at the strikethrough price on
09-18-2026

$ 14.36 USD

Add to Wish List

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

Nozzle Mounting adapter for hose

T#:31522909

Part#: 40110

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

VRSF S55 Turbo to Charge Pipe O-Ring Pair - F8X M3 M4, F87 M2 Competi...

We Price Match - Give Us A Call or Chat!

T#:585044

Part#: OR300

In Stock

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

This is a pair (2) of replacement turbo to charge pipe o-rings for your S55 BMW. If your BMW has an S55, this will replace the existing/worn turbo outlet o-rings that sit inside the charge pipe.

Magnum FORCE Stage-2 Carbon Fiber Trim Piece

T#:584566

Part#: 54-13032CC

In Stock

$ 88.00 USD

Add to Wish List

Qty

$ 88.00 USD

Add to Wish List

Magnum FORCE Stage-2 Carbon Fiber Trim Piece BMW M3/M4 (F80/82/83) 15-19 I6-3.0L S55

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW F80 M3 S55 3.0L

Sub-Categories

Benefits:

ECS Silicone Coupler

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Benefits:

Enhance Engine Performance with Silicone Vacuum Line

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results