BMW F82 M4 S55 3.0L

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Here's what makes this floor jack the best on the market:

• Dual pump pistons to reach maximum height in 5 pumps
• Low profile design keeping lowered cars in mind
• Easy maneuverability 
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Length 50"
• Shipping Weight 50 lbs

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

Features:

•  2" longer than most
• Deluxe transverse support for even more stability
•  Two angle chain hooks for safer and more stable chain support 
•  61" long and fully adjustable to any width
•  Weight rating is a full 1000 lbs.
•  Includes four rubber padded feet to prevent slipping and damage to cars finish 
• This tool features a dual hook design for holding engine or transmission in place
•  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

This professional-grade deluxe fender roller allows you to gently and gradually flatten your inner fender lips in order to increase your fender to tire clearance.

This new deluxe fender roller has been designed to fit most applications.

This is the perfect tool for:

If you want to lower your vehicle
If you want wider-than-stock wheels
If you are going to use wheel spacers or decreased offset
Will work with bolt patterns of 4x100 and 5x100 up to 4x114.3 and 5x130 with 12mm or 14mm lug bolts.

By rolling the fender lip flat, you can lower your car further, and give your car a wider stance, without your tires rubbing on the inside of the fender.

Fully adjustable for use on vehicles of different ride heights, offsets, and wheel bolt patterns.

Use of a heat gun is recommended to soften the fender surface during the rolling process and prevent paint cracking.

 This comprehensive kit is basically a one-stop-shop to pick up all the special torx, triple square, & hex bits you need to keep your car where it should be... on the road!

This Universal European Tool Kit features the following:

• Torx Screwdriver Kit - 6 Pieces (Sizes included: T10, T15, T20, T25, T27, & T30. Perfect for removing door and dashboard panels, interior trim, and smaller underhood components. )
• Swivel Head Triple Square Driver Kit - 4 Pieces (Set of four 3/8 drivers in M6, M8, M10, and M12 sizes. Perfect for working around corners in those hard to reach spots.)
• Specialty Bit Kit - 100 Pieces (100 piece torx & hex bit kit to fit a wide assortment of automotive fasteners. Made of hardened Chrome Vanadium steel, packaged in a handy blow molded case.)
• Go-Through Screwdriver Kit - 6 Pieces (Kit includes durable slotted & phillips head nickel-chromoly screwdrivers with hardened shafts that extend the entire length of the driver.)

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

BMW F8X M3 M4 Rear Suspension Link Kit is designed to enhance the handling and stability of your high-performance BMW. This kit eliminates the vagueness and flex commonly associated with stock rear suspension links, which rely on rubber bushings that can flex under load. By replacing these with Teflon-coated, machined steel rod ends and billet aluminum rods, this kit ensures a more planted and secure feel, especially during hard acceleration, braking, and cornering. The rods feature a hex design for easy adjustments, making it an ideal upgrade for those running larger wheels and tires.

• Improved Stability: Eliminates flex under acceleration, braking, and cornering for a more secure feel.
• High-Quality Materials: Teflon-coated, machined steel rod ends and billet aluminum rods.
• Adjustable Design: Hex machined center rods for easy adjustment.
• Enhanced Handling: Reduces vagueness and provides a more planted driving experience.
• Ideal for Upgrades: Recommended for use with larger wheels and tires.
• Turner Motorsport Quality: Trusted performance parts backed by over 35 years of BMW tuning expertise.

Elevate your BMW's performance with the Dinan Free Flow stainless exhaust, designed to reduce backpressure and increase flow, resulting in up to 5 horsepower gain. Crafted from durable 20-gauge 304 stainless steel, this exhaust system boasts 3.5" polished tips and Dinan's Tuned Resonance Chamber Technology for a pleasant yet aggressive tone, remaining civil under normal driving conditions.

Key Features:

• Max gain of 5 horsepower
• Durable 20-gauge 304 stainless steel muffler
• 3.5" polished tips
• Dinan's Tuned Resonance Chamber Technology for a pleasant tone
• High-flow exhaust valves reduce drone & improve flow
• Weight savings compared to stock system
• Worth 3 points toward your Dinan badge

For over 35 years, Dinan has been a leading BMW tuning company, focusing on balanced performance that preserves the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan ensures quality, carefully developed, and tested products.