BMW Suspension Parts for BMW F82 M4 S55 3.0L

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

For vehicles with 5-Bolt Mounts and EDC

T#:555818

Part#: I-68-BR

Ships in 5 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:555827

Part#: I-49-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

BC Racing BR Series Extreme Low Coilover Suspension Kit - 5-Bolt Top ...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

For vehicles with 5-Bolt Mounts and EDC

T#:568069

Part#: I-68E-BR

Ships on Sep 10, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:598295

Part#: I-49-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:598299

Part#: I-68-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing BR Series Extreme Low Coilover Kit - 3-Bolt Top Mount - BMW...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:568076

Part#: I-49E-BR

Ships on Sep 10, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months.

Show More Show Less

BR Series Coilover Suspension Kit With Swift Springs Upgrade ...

For vehicles with 5-Bolt Mounts and EDC*

T#:585960

Part#: I-68-BR-SW

Ships on Sep 10, 2026

$ 1,715.00 USD

Add to Wish List

Qty

$ 1,715.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. For vehicles with 5-Bolt mounts and EDC* (*Requires EDC Elimination kit. See T#405066) Specs and Features: 7k Front & 14k Rear Spring Rate Linear front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Rear Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening 2 inch minimum and 3+ Inches of total potential drop Great for Track, Street, and any other conditions

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:4347105

Part#: I-68-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:4347104

Part#: I-49-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:47439437

Part#: I-49-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:47439395

Part#: I-68-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:47439396

Part#: I-68-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:47439436

Part#: I-49-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

Powerflex Rear Diff Rear Mounting Bushing - F8X M2,M3,M4

T#:554716

Part#: PFR5-4026

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Powerflex Dual Mount Diff Bracket - BMW F8X M2/M3/M4

T#:14023858

Part#: PFR5-4030

In Stock

$ 309.99 USD

Add to Wish List

Qty

$ 309.99 USD

Add to Wish List

NOTE: We suggest replacing 3 of BMW # 31126760203 during installation Kit comes supplied with M14 mounting bolt, thread locker, and a Powerflex keyring. With the newer F8x M2/M3/M4's making big power and having superb chassis straight from the showroom, it's no wonder they're often found at the most serious of track-days or at tuning shops around the globe. Unfortunately, the power that makes these cars so fun to drive eventually has an impact on the vehicles' suspension components- most notably the rear differential bushings. Despite having alloted for two mounting bushings on the factory tubular subframe, BMW opts to use only a single offset bushing in the rear to mount the diff bracket to the subframe. This essentially creates a pivot point for the diff under torque loading, especially if the 4x front diff bushes are worn out and softer than they once were. With hard launches and sudden and frequent on-off throttle changes, the single rear OE rubber bushing is subject to extreme torsional and directional forces, resulting in rapid degradation with failure often seen at around the 30,000-40,000 mile mark, and an unsettled and potentially clunky rear-end. The PFR5-4030 Dual Mount Diff Bracket is made from our in-house CNC machined 6082 High-Tensile Aluminum, and is designed to utilize the secondary mounting position on the OE subframe. With the addition of a second bushing, this prevents the diff from twisting under load, providing benefits such as: Reduced drivetrain movement Improved throttle response A more controlled and consistent chassis response to acceleration/deceleration Improved tire-to-road power transfer due to reduced wheel hop Reduced strain on bushings The corrosion-resistant, satin black, anodized aluminum bracket is optimized for high stress and deflection while withstanding high torque loads, but serves the same purpose in road-use and track-use cars with either a single OE bushing or dual aftermarket bushings. Although the bracket can be fitted without the need to remove the subframe from the vehicle completely, we would strongly recommend combining Powerflex products by using our already hugely popular 80A durometer PFR5-4026 Rear Diff Rear Mounting Bushings for both rear mounting positions alongside our PFR5-4025 Rear Diff Front Mounting Bushings in the front for the ultimate in differential control and a lasting street or track solution.

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

T#:554720

Part#: PFR5-4025X4

In Stock

$ 346.99 USD

Add to Wish List

Qty

$ 346.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

BMW F8X & G8X M2 / M3 / M4 Powerflex Rear Diff Rear Mounting Bushing ...

T#:554715

Part#: PFR5-4026B

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Swift Springs - F8X M4 1.1"F 0.9"R

T#:1762240

Part#: 4X908R

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

Swift Springs understands that not all springs are created equal. While many springs may share similar dimensions and spring rates, the manufacturing process and materials used are pivotal to their performance. Drawing upon years of experience and extensive research, Swift Springs has refined the spring manufacturing process to perfection. In their relentless pursuit of excellence, Swift Springs developed a proprietary steel alloy known as "HS5.TW." This material accomplishes the primary objectives Swift had in mind:

Maintaining the most consistent spring rate throughout the stroke
Providing the largest amount of stroke
Ensuring the highest durability against spring height loss
Offering the lightest weight

Since its establishment in 1997, Swift Springs has taken on a diverse array of tasks and applications, ranging from oval track and dirt racing to enthusiastic street driving. They have accumulated invaluable experience working with world-class race teams and drivers from around the globe. Given the varied demands they've encountered over the years, you can have full confidence in Swift Springs to deliver the perfect spring solution for any requirement.

Show More Show Less

Rear Sway Bar Bushing - 25mm - Street

T#:22163393

Part#: PFR5-4013-25

Ships in 2 Business Days

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

When using PowerFlex Street Series Rear 25 mm Sway Bar Bushings for your BMW F80/F82F83, you will experience the benefits of a product that is made from the best material - polyurethane. You will feel: Enhanced Handling and Performance: Upgrading to Powerflex 25 mm rear sway bar bushings is like giving your car a secret performance boost. These bushings are designed to provide better control and stability during sharp turns and quick maneuvers. When you hit those curves, you'll feel your car hugging the road more confidently. Reduced Body Roll: One of the immediate benefits you'll notice is a reduction in body roll. Say goodbye to that sensation of leaning heavily when taking corners. The 14mm rear sway bar bushings work hard to keep your car's body level, resulting in a smoother and more comfortable ride. Improved Grip A better grip on the road is a game-changer, especially if you enjoy spirited driving or track days. With these beefier bushings, your rear tires will stay planted, offering improved traction. Whether you're accelerating out of a turn or holding a steady line, the enhanced grip is your new best friend. Sharper Steering Response: Tired of sluggish steering? These upgraded bushings can sharpen your car's steering response. You'll feel more in control of your vehicle, with quicker reactions to your steering inputs. It's like having a direct line of communication between you and the road. All Powerflex bushings come with a lifetime warranty Fits these BMW models: F80 M3 F82 M4 F83 M4

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

T#:554719

Part#: PFR5-4025BX4

In Stock

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Show More Show Less

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

T#:21637213

Part#: PFF5-4001G

Ships in 2 Business Days

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

When you opt to enhance your BMW F80, F82, F83, or F87 with Radius Arm to Chassis Bushings, you unlock a multitude of advantages. These include: Enhanced Handling: Radius Arm to Chassis Bushings elevate your BMW's handling to a higher level, granting exceptional control, especially during demanding maneuvers and sharp corners. This translates to an improved sense of stability on the road. Reduced Vibration and Noise: These bushings excel at reducing vibrations and dampening noise, leading to a quieter and smoother driving experience. Your ride quality becomes more refined, enhancing overall comfort. Improved Steering Response: Bid farewell to unresponsive steering. Radius Arm to Chassis Bushings enhance your BMW's steering response, delivering precise and immediate control, akin to forging a direct connection with the road. Extended Component Lifespan: Opting for high-quality bushings extends the lifespan of various suspension components. They exhibit superior durability compared to stock bushings, which translates to fewer replacements and increased longevity. Enhanced Traction: Whether you're passionate about spirited driving or partake in track activities, these bushings provide superior traction. Your BMW maintains consistent contact with the road surface, allowing you to confidently explore your vehicle's performance limits. OE / OEM Cross Reference Numbers: 31122284531/ 31122284532 / 31122283579 Fits these BMW models: F80 - M3 F82 - M4 F87 - M2

Show More Show Less

BMW F80 M3 / F82 & F83 M4 Front Radius Arm To Chassis Bushings ...

T#:7828849

Part#: PFF5-4001

Ships in 2 Business Days

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

Replace your inner control arm bushings with performance Powerflex bushings to tighten up your control and improve stability. *Door Buster Special - New Product* This is a replacement part that uses the Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. If the control arm bushings on your vehicle are beginning to fail, it will become quickly apparent. Suspension noise will be drastically increased, there will be steering wheel shake when hitting road hazards, and the entire car will have an all around loose feel. This can also lead to premature tire failure as alignment is negatively affected. Replace your control arm bushings to give your entire suspension a tighter feel. Rattling over bumps, a loose feeling when driving, and play in the front wheels is the main indicator that your bushings may be failing. The stock rubber tends to get dry rotted, wear out, and cause play in the attachment point for the control arm. Replace yours when they wear out, or when replacing a control arm that didn't include these pieces.

Show More Show Less

Powerflex Silicone Grease

T#:362715

Part#: PCG1

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

The Powerflex silicone grease is the only lubricant we suggest for long, squeak free operation. The lubricant contains silicone that resists heat and water and keeps a more constant viscosity to allow it to stay in the bushing as temperatures increase. The lubricant also does not lose it's lubrication properties over time like an anti-seize type lubricant. Each pack will lube 2 large bushings or 4 small.

Show More Show Less

BMW F8X - Powerflex Rear Sway Bar Bushing - 22.9mm - Street - PFR5-40...

T#:21637215

Part#: PFR5-4013-22.9

Ships in 2 Business Days

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

ASP Series Height Adjustable Spring & Camber Plate Kit - BMW F80 M3, ...

For vehicles with 5-Bolt front strut mounts

T#:52621850

Part#: 131BW001C1

Ships in 6 Business Days

$ 1,115.00 USD

Add to Wish List

Qty

$ 1,115.00 USD

Add to Wish List

BC Racing’s new adjustable spring perch (ASP) is an excellent solution for customers seeking a lowered stance, but still require the OEM electronic damping system to remain functional. Compared with conventional lowering springs, the BC Racing ASP offers ride height adjustability that seamlessly allows users more flexibility to tailor their chassis to the needs of modern suspension, performance, and style.

Show More Show Less

ASP Series Height Adjustable Spring & Camber Plate Kit - BMW F80 M3, ...

For vehicles with 3-Bolt front strut mounts

T#:52621845

Part#: 131BW001C2

Ships in 6 Business Days

$ 1,115.00 USD

Add to Wish List

Qty

$ 1,115.00 USD

Add to Wish List

BC Racing’s new adjustable spring perch (ASP) is an excellent solution for customers seeking a lowered stance, but still require the OEM electronic damping system to remain functional. Compared with conventional lowering springs, the BC Racing ASP offers ride height adjustability that seamlessly allows users more flexibility to tailor their chassis to the needs of modern suspension, performance, and style.

Show More Show Less

ASP Series Height Adjustable Spring Kit - BMW F80 M3, F82 M4 (RWD) ...

T#:52621851

Part#: 131BW001N1

Ships in 6 Business Days

$ 815.00 USD

Add to Wish List

Qty

$ 815.00 USD

Add to Wish List

BC Racing’s new adjustable spring perch (ASP) is an excellent solution for customers seeking a lowered stance, but still require the OEM electronic damping system to remain functional. Compared with conventional lowering springs, the BC Racing ASP offers ride height adjustability that seamlessly allows users more flexibility to tailor their chassis to the needs of modern suspension, performance, and style.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F82 M4 S55 3.0L

Sub-Categories

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing BR Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BC Racing BR Series Extreme Low Coilover Suspension Kit - 5-Bolt Top ...

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BC Racing DS Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing BR Series Extreme Low Coilover Kit - 3-Bolt Top Mount - BMW...

BR Series Coilover Suspension Kit With Swift Springs Upgrade ...

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

Powerflex Rear Diff Rear Mounting Bushing - F8X M2,M3,M4

Powerflex Dual Mount Diff Bracket - BMW F8X M2/M3/M4

BC Racing Rear Damping Adjustment Extenders - BR Type

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

BMW F8X & G8X M2 / M3 / M4 Powerflex Rear Diff Rear Mounting Bushing ...

Swift Springs - F8X M4 1.1"F 0.9"R

Rear Sway Bar Bushing - 25mm - Street

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

BMW F80 M3 / F82 & F83 M4 Front Radius Arm To Chassis Bushings ...

Powerflex Silicone Grease

BMW F8X - Powerflex Rear Sway Bar Bushing - 22.9mm - Street - PFR5-40...

ASP Series Height Adjustable Spring & Camber Plate Kit - BMW F80 M3, ...

ASP Series Height Adjustable Spring & Camber Plate Kit - BMW F80 M3, ...

ASP Series Height Adjustable Spring Kit - BMW F80 M3, F82 M4 (RWD) ...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results