BMW Engine Parts for BMW F82 M4 S55 3.0L

VAC Harmonic S55 SuperDamper By ATI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:639880

Part#: VAC-HPCD-S55

In Stock

$ 989.99 USD

Add to Wish List

Qty

$ 989.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley. Made in the USA.

Show More Show Less

Bremmen Parts Eccentric Shaft - BMW N55 S55 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:36913364

Part#: 11377589883

Ships on Nov 19, 2026

Sale - Save 20% $ 614.99

This product was last offered at the strikethrough price on
05-03-2026

$ 491.22 USD

Add to Wish List

Qty

Sale - Save 20%

$ 614.99

This product was last offered at the strikethrough price on
05-03-2026

$ 491.22 USD

Add to Wish List

This eccentric shaft is a vital component of your BMW's N55 Valvetronic system, responsible for precise control of valve lift. In the N55 engine, the Valvetronic system uses intermediate levers between the camshaft and lifters to adjust valve lift dynamically. These levers are actuated by this eccentric shaft, which is rotated by an electronically controlled motor under the direction of the engine computer.

Eccentric shaft failure is a common issue in N55 engines, often caused by inadequate lubrication due to extended oil change intervals. The most frequent failure occurs when the eccentric shaft gear wears down, leading to disengagement from the motor's worm drive. Symptoms include multiple fault codes, such as P1014 (Shaft Parity Error), P1017 (Shaft Sensor Plausibility), P1023 (Valvetronic Adjustment Range), and P10E1 (Valvetronic System No Travel Detected).

If your BMW is experiencing Valvetronic-related fault codes, a failing eccentric shaft could be the source of the problem. Opt for this premium direct replacement from Bremmen Parts to restore your Valvetronic system's functionality and ensure a durable, high-quality repair.

Show More Show Less

OEM Pierburg VANOS Solenoid - BMW N55 S55 N63 S63

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27638815

Part#: 11368605123

Back Ordered

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

The VANOS solenoid controls variable camshaft timing by controlling oil flow to the VANOS adjustment unit. These commonly fail at higher milages but are easy to replace. If your VANOS solenoid has failed, you could experience rough running conditions, a loss of power, and a check engine light. Replace your faulty solenoid with this OEM unit from Pierburg to restore smooth engine operation and power. Two are required for models with an N55 or S55 engine Four are required for models with an N63 or S63 engine

Show More Show Less

Walbro Ultra High-Performance Fuel Pump - (Universal E85 Ethanol) - T...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23020149

Part#: F90000295

In Stock at Vendor

$ 203.99 USD

Add to Wish List

Qty

$ 203.99 USD

Add to Wish List

New DCSS 39/50 High-Performance Pump – F90000295

Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
Featuring award-winning DCSS technology
E85 compatible
High-pressure relief setting - supports supercharger and turbo applications
Capable of supporting 900+HP at 60PSI naturally aspirated applications
Complete Pump and kit combination – TCD495

Fuel: GAS & E85

Horsepower: 900+ at 60PSI, naturally aspirated applications

Over All Pump Length: 131mm

Main Housing Diameter: 39mm

Lower Housing Diameter: 50mm

Fuel Inlet Diameter: 11mm OD

Fuel Outlet Diameter: 11mm OD

Flow Rate: 535LPH at 40psi

Test Voltage: 13.5 Volts

Show More Show Less

Genuine BMW Timing Chain Tensioner - F8X N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:181000

Part#: 11417618943

Ships in 1-2 days

6% off MSRP $ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 115.99 USD

Add to Wish List

Qty

6% off MSRP

$ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 115.99 USD

Add to Wish List

Genuine BMW Chain Tensioner

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Genuine BMW Exhaust Valve - F82 F83 F84 M3 M4 S55 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:194184

Part#: 11347847033

In Stock

14% off MSRP $ 77.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Limited Qty Sale

Add to Wish List

Qty

14% off MSRP

$ 77.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Exhaust Valve

Blackline Performance Coolant Expansion Tank Cap Cover - Gray - BMW M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641288

Part#: FXXCET

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.

Show More Show Less

TurboSmart OPR V2 Oil Pressure Regulator

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28504207

Part#: TS-0811-0012

In Stock

10% off MSRP $ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Qty

10% off MSRP

$ 189.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 170.99 USD

Add to Wish List

Introducing Turbosmart’s OPR V2 Turbocharger Oil Pressure Regulator, a cutting-edge solution launched in 2022 that ensures steady oil pressure for your turbocharger. This innovative regulator features a return-less design with an integrated 44 Micron Stainless Steel Mesh Oil Filter, providing robust performance and protection.

The OPR V2 is the first of its kind, utilizing Turbosmart’s proprietary flow control method to maintain optimal oil pressure regardless of engine oil variables like pressure or temperature. It guarantees a smooth oil flow to your turbocharger, safeguarding critical components such as Exhaust Drive, Back & Charge Pressures from excessive oil pressure that could lead to oil consumption and smoke.

Gone are the days of guesswork with restrictors and complex plumbing for oil pressure regulation. The OPR V2 simplifies the process with its return-less, inline installation and the convenience of a built-in 44 Micron Oil Filter. This filter, made of serviceable and replaceable Stainless Steel Mesh, adds an extra layer of defense against engine oil debris that could harm your turbocharger.

Key Features:

Innovative Patent Pending Design Durable Aluminium (6262 T6) Anodised Body & Valve Regulated Oil Pressure Compatible with Most turbochargers Integrated Stainless Steel (304) Mesh Oil Filter -4AN Inlet and Outlet for easy installation 1/8 NPT Sensor/Gauge Port for monitoring Directional Inlet Feed Logic for optimized performance Laminar Flow Output for consistent oil delivery Compatible with all Engine Oils Designed and Manufactured in Australia

Show More Show Less

Genuine BMW Cylinder Head Gasket F80/82/83

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:207674

Part#: 11127849620

In Stock

13% off MSRP $ 303.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 263.99 USD

Add to Wish List

Qty

13% off MSRP

$ 303.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 263.99 USD

Add to Wish List

Genuine BMW Cylinder Head Gasket - 1.20Mm

Powerflex Engine Mount Inserts - F8X M2/M3/M4 Race(Black)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924328

Part#: PFF5-4021BLK

In Stock

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings, while improving performance and allowing for a more engaging driving experience. Powerflex is pleased to introduce their new S55 Engine Mount Inserts, intermediate alternatives to the BMW aluminum inserts and much stiffer full replacement engine mounts available on the aftermarket. Made in Black 70A durometer material, they are designed to fit the OE mounts snuggly to restrict engine movement with a minimal increase in NVH, perfect for those with tuned road cars. Their design and flexibility also mean they can be fitted to the vehicle without removing the engine mounts themselves. Reducing engine/transmission movement by way of upgraded inserts has the following benefits: Sharper throttle response Improved gear shifting More direct power transfer More balanced on/off throttle handling Prolonged life of the OE mounts *Yellow version pictured for installation reference A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine and chassis. The harder the material used, the greater the NVH transmitted.

Show More Show Less

Bremmen Parts Oil Pump Timing Chain Tensioner - N55/S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39059235

Part#: 11417618943

In Stock

Sale - Save 21% $ 69.99

This product was last offered at the strikethrough price on
05-03-2026

$ 55.48 USD

Add to Wish List

Qty

Sale - Save 21%

$ 69.99

This product was last offered at the strikethrough price on
05-03-2026

$ 55.48 USD

Add to Wish List

This item fits the following BMW Chassis: E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including: N55,S55

Schwaben 12 Ft 6 Gauge Booster Cables

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:378531

Part#: 007269SCH01

In Stock

Sale - Save 33% $ 44.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 33%

$ 44.99

This product was last offered at the strikethrough price on
05-02-2026

$ 29.99 USD

Add to Wish List

Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.

BMW S55 Upgrade Turbocharger Set, MSL65-80

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Available for the BMW F8x (M2 Competition, M3 and M4)

T#:12872412

Part#: 10210019

In Stock

2% off MSRP $ 5,098.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,978.00 USD

Add to Wish List

Qty

2% off MSRP

$ 5,098.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,978.00 USD

Add to Wish List

Mosselman BMW S55 Upgrade Turbocharger Set, MSL65-80 (~ 650-800hp)

BMW N55 S55 Dinan Ignition Service Kit

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14585043

Part#: D650-0002KT2

In Stock

$ 319.99 USD

Add to Wish List

Qty

$ 319.99 USD

Add to Wish List

1/2-inch Drive 17mm VANOS Flush-Cut Socket

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:394201

Part#: 012016ECS02A

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 1 Meter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41534

Part#: 13311272750

In Stock

3% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

3% off MSRP

$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 6X11mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36,E38,E46

Genuine BMW Guide Rail - 11417618941

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:180999

Part#: 11417618941

In Stock

7% off MSRP $ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD

Add to Wish List

Qty

7% off MSRP

$ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD

Add to Wish List

Genuine BMW Guide Rail -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Oil Pan Gasket for N52 N55 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641949

Part#: 11137600482

Ships in 6 Business Days

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Ensure a leak-free BMW N52 or N55 3.0L engine with the Oil Pan Gasket. If you've noticed oil stains on your driveway, it could be a sign of a failing gasket. Replace it promptly to prevent further leaks and maintain the optimal performance of your BMW.

Leak Prevention: The Oil Pan Gasket effectively seals the oil pan, preventing oil leaks.
Common Leak Source: Addresses a common source of oil leaks in N52 and N55 3.0L engines.
Optimal Engine Performance: Ensures the engine operates without oil seepage, maintaining efficiency.
Easy Replacement: Ideal for DIY oil pan projects, making replacement hassle-free.

Upgrade your BMW's engine reliability with the N52/N55 3.0L Oil Pan Gasket, designed to keep your driveway oil-free.

Show More Show Less

1/2" Drive 45-Tooth Digital Torque Wrench

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:396471

Part#: 023380SCH01A

In Stock

Sale - Save 10% $ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer.

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

Setting Range: 45-220 ft lbs (60-300 Nm)
Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
Size: 22" (550mm) length for easy leverage
Accuracy: +- 3%
Include blow molded holding case
Requires one 3V CR2030 battery (included)

Show More Show Less

Schwaben 5pc Metric Flare Nut Wrench Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:380810

Part#: 010798SCH01A

In Stock

Sale - Save 15% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD

Add to Wish List

This set is a must have for changing brake, fuel, oil lines of all kinds. Complete size coverage

MMX Performance - 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Ca...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:45039725

Part#: MMR20-1004FK

Ships in 2 Business Days

$ 1,227.99 USD

Add to Wish List

Qty

$ 1,227.99 USD

Add to Wish List

The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.

Show More Show Less

MMR Crank Hub Kit - N55/S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4565824

Part#: MMR20-1003FK

Ships in 2 Business Days

$ 849.99 USD

Add to Wish List

Qty

$ 849.99 USD

Add to Wish List

Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.

Show More Show Less

Radium Engineering Universal Catch Can Petcock Drain Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27905095

Part#: 20-0024

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Universal Valve Spring Compressor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1809130

Part#: W89409

In Stock at Vendor

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

For servicing overhead valve engine with cylinder head removed.

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

OEM Elring Cylinder Head Valve Cover - BMW S55 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:45005552

Part#: B39.880

In Stock at Vendor

$ 480.99 USD

Add to Wish List

Qty

$ 480.99 USD

Add to Wish List

If your valve cover has warped or cracked due to years of heat cycles, this replacement from Elring is just what you need to eliminate leaks and get rid of check engine lights! Replaces BMW p/n 11127846359

Show More Show Less

Genuine BMW Rubber Mounting Left - - 22112284817 - F80,F82,F83, ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:216994

Part#: 22112284817

Ships in 1-2 days

6% off MSRP $ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Qty

6% off MSRP

$ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

The Motor Mount is an essential component that securely attaches the engine to the vehicle’s chassis while reducing vibrations and absorbing engine movement. It enhances driving comfort, minimizes noise, and ensures engine stability for optimal performance. ### **Key Features:** - **Engine Stability:** Maintains proper alignment and securely holds the engine in place. - **Vibration Reduction:** Absorbs engine movement to minimize vibrations and noise. - **High-Quality Materials:** Constructed from durable rubber and metal for long-lasting performance. - **OEM Precision:** Genuine BMW part designed for perfect fitment and reliability. - **Improved Comfort:** Enhances ride smoothness while protecting surrounding engine components. This component is crucial for maintaining a smooth and controlled driving experience while ensuring the longevity of engine-related parts.

Show More Show Less

Genuine BMW Outdoor Temperature Sensor/Probe - Multiple BMWs ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:375994

Part#: 65816936953

Ships in 3 Business Days

6% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD

Add to Wish List

Qty

6% off MSRP

$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD

Add to Wish List

Common fix for incorrect OBC temperature readings

Genuine BMW High Pressure Fuel Pressure Sensor - N55 3.0L, B38 1.5L, ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:42256

Part#: 13537620946

Ships in 1-2 days

9% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

9% off MSRP

$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW Sensor, High-Pressure

Genuine BMW Mechanical Belt Tensioner -

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:574081

Part#: 11288088632

In Stock

6% off MSRP $ 215.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.99 USD

Add to Wish List

Qty

6% off MSRP

$ 215.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.99 USD

Add to Wish List

Genuine BMW Knock Sensor

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14966

Part#: 13627566786

In Stock

9% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD

Add to Wish List

Qty

9% off MSRP

$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD

Add to Wish List

Genuine BMW Ping Sensor
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N54,N54T,N55,S55

Show More Show Less

Accessory Belt Service Kit w/ Kevlar Reinforced Belt - F8X S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22163426

Part#: 11287848605TKT

In Stock

$ 414.99 USD

Add to Wish List

Qty

$ 414.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes ECS Kevlar Reinforced Drive Belts, tensioner assembly, and idler pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

King Performance BMW N54/N55 Rod Bearings - 2 Pairs

For Vehicle Models 2015-2016

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25706102

Part#: CR222GPC026

Ships in 6 Business Days

$ 101.99 USD

Add to Wish List

Qty

$ 101.99 USD

Add to Wish List

King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. Set of 4 Bearing Shells - .026 Oversize

Show More Show Less

GENIUS 6 Volt / 12 Volt 5A Battery Charger - NOCO

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641140

Part#: GENIUS5

Ships in 8 Business Days

22% off MSRP $ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Add to Wish List

Qty

22% off MSRP

$ 89.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 69.99 USD

Add to Wish List

The GENIUS5 is an exceptional addition to our lineup boasting incredible power, top-notch performance, energy efficiency, and a compact design. The GENIUS5 is a versatile 6-volt and 12-volt charger, maintainer, and desulfator with a 5-amp rating. It's engineered for use with lead-acid batteries in automotive, marine, and deep-cycle applications, covering flooded, gel, AGM, maintenance-free variants, and even lithium-ion batteries.

Features:

Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

BMW Secondary Pump Activation Harness - BMW E9X F22/23 F3X F8X ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094337

Part#: 201-0049

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.

Show More Show Less

Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31158805

Part#: 85115

Ships on Sep 3, 2026

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db

The Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db is designed to make sure your presence is known with powerful, attention-grabbing sound. These high-performance sports horns feature:

Impressive Loudness: Delivers a powerful 112 decibels, ensuring you’re heard in any situation.
Dual Frequency: Includes 330Hz and 400Hz horns for a dynamic and distinct sound.
Lightweight & Durable: Constructed for easy installation with weather-resistant covers, built to withstand the elements.
Easy Installation: Quick and straightforward to install, enhancing vehicle safety with minimal effort.

The kit is a must-have for anyone looking to enhance their vehicle’s horn performance and visibility on the road.

Show More Show Less

Small Pick Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3572009

Part#: LCB125SCH

In Stock

Sale - Save 20% $ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.59 USD

Add to Wish List

This versatile set of tools has almost an endless list of uses. Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips.This kit features small picks and hooks. This 8pc set should be part of everyone's tool assortment.

Show More Show Less

BMW Flywheel Holder - N52 N54 N55 S55 M57

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24212285

Part#: 118180

Ships in 5 Business Days

$ 232.99 USD

Add to Wish List

Qty

$ 232.99 USD

Add to Wish List

Replaces BMW tool # 83300493587 (118180) This tool is often used when replacing the vibration damper (harmonic balancer), when replacing the crankshaft or crankshaft seals, and when replacing the timing chain. BMW Flywheel Holder for M47T2, M47TU, M57TU, M67, N45, N45T, N46, N46T, N51, N52, N53, N54, N55 & W17 with Manual trans. Also S55 stick and auto trans.

Show More Show Less

Genuine BMW Rubber Mounting Right - 22112284818 - F80 M3,F82,F83 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:211523

Part#: 22112284818

In Stock

6% off MSRP $ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Qty

6% off MSRP

$ 186.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 174.99 USD

Add to Wish List

Genuine BMW Rubber Mounting Right -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Bremmen Oil Filter Housing Cover - BMW N20 N52 N54 N55 S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640150

Part#: 11427525334

In Stock

Sale - Save 21% $ 30.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.47 USD

Add to Wish List

Qty

Sale - Save 21%

$ 30.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.47 USD

Add to Wish List

If your oil filter housing cap is cracked or stripped, replace it with a fresh one from Bremmen Parts!

Blackline Performance Chargecooler Coolant Tank Cap Cover - Gray - BM...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641290

Part#: FXXCCT

In Stock

$ 52.00 USD

Add to Wish List

Qty

$ 52.00 USD

Add to Wish List

Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Charge Cooler Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Charge Cooler Reservoir Cap Cover will fit most BMW vehicles equipped with the S55 and S63 engines with the charge cooler reservoir tank found in the following vehicles: F87 M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more. Check your coolant cap ensuring that it is the same shape as seen in the product photos. Each kit comes with a Billet Charge Cooler Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.

Show More Show Less

URO Oxygen Sensor - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:38094317

Part#: 11787848482

In Stock

$ 109.25 USD

Add to Wish List

Qty

$ 109.25 USD

Add to Wish List

Located before the catalytic converter on the longer downpipe, also considered the upstream O2 sensor.

Idler Pulley

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:26271781

Part#: 11288673720

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Boost Plus UltraSafe Lithium 1000A Jump Starter - NOCO

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641108

Part#: GB40

In Stock

20% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Qty

20% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

The GB40 is a compact lithium-ion battery jump starter pack capable of delivering 1,000 amps, allowing you to jump-start a dead battery within seconds. Equipped with patented safety technology, it ensures spark-proof connections and reverse polarity protection, making it user-friendly and safe for everyone. Not only does it serve as a powerful battery booster, but it also functions as a portable power source for charging USB devices such as smartphones and tablets. Designed to support vehicles like cars, boats, RVs, trucks, and more, it can handle gas engines up to 6 liters and diesel engines up to 3 liters.

Features:

Compact, yet powerful lithium jump starter rated at 1,000 Amps - up to 20 jump starts on a single charge.
An ultra-safe and mistake-proof design with spark-proof technology and reverse polarity protection, which allow it to safely connect to any battery.
An ultra-bright 100 lumen LED flashlight with 7 light modes, including SOS and emergency strobe.
Recharge your personal devices on the go, like smartphones, tablets, e-watches and more - up to 4 smartphone recharges.
Designed for gas engines up to 6 Liters and diesel engines up to 3 Liters for cars, boats, lawn mowers and more.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Hella Hella Horn - Low Tone

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590880

Part#: 2768082

In Stock

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Disc Type Low-Tone, 12 V, 335 Hz with Bracket

Genuine BMW Sprocket Wheel - N55 3.0L, N54 3.0L, N52 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34005

Part#: 11317502180

In Stock

5% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.21 USD

Add to Wish List

Qty

5% off MSRP

$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.21 USD

Add to Wish List

Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40004858

Part#: 201-0261

In Stock

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

Genuine BMW Socket repair kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:207094

Part#: 61132359996

In Stock

Sale - Save 8% $ 29.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.74 USD

Add to Wish List

Qty

Sale - Save 8%

$ 29.99

This product was last offered at the strikethrough price on
06-15-2026

$ 27.74 USD

Add to Wish List

Genuine BMW Rep. Kit For Socket Housing - 4 Pol.
This item fits the following BMW Chassis:
E46 M3,E46,E85 Z4,E90,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW F82 M4 S55 3.0L

Sub-Categories

New DCSS 39/50 High-Performance Pump – F90000295

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results