There are many benefits to installing harnesses in your BMW -

• maintain a proper driving position
• keep you planted in the seat and not bracing with your left leg or shoulder
• lower lap times thanks to improved driver confidence
• advanced technology is safer than standard 3-point belts

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Rallye harnesses are Schroth's universal fit, bolt-in harness design that still meets DOT and TUV specs. The Rallye 4 harness fits most BMWs better than a Rallye 3 type thanks to its four mounting points that bolt to four existing anchor points in the BMW chassis: outboard lap belt anchor on B-pillar, inboard lap belt anchor on seat, and both rear seat belt anchors. The Rallye harnesses are a fixed, semi-permanent install but a quick-connect buckle is included in the rear seat harness so that the front and rear sections can be separated and tucked away when not in use. This also allows you to use the stock 3-point seatbelts in the front and rear seats without obstruction. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Rallye belts are not side-specific; they fit either the Left or Right side of the vehicle.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

E36 Fitment Note: a special bolt is required for installation on the stock E36 seat. Make sure you order this bolt for any E36 installations. Click here for the link to the bolt.

Rallye 4 Harness Summary:

• Suggested Use:  autocross, daily driver
• Shoulder Belt:  2" pull down
• Lap Belt:  2" pull down
• Buckle:  Rallye push button
• Installation:  permanent bolt-in
• Seat Compatability:  approved only for stock seats with headrest separated from backrest
• HANS compatible?  No.

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

Transform Your BMW's Exhaust with ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Matte Finish - Pair

• Enhances the appearance of the exhaust system
• Made from high-quality titanium for durability
• Matte finish adds a sleek and modern touch
• Universal fit for various BMW models

Upgrade your BMW's exhaust system with ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Matte Finish - Pair. Crafted from high-quality titanium, these exhaust tips not only enhance the appearance of your vehicle's exhaust system but also ensure durability for long-lasting performance. The matte finish adds a sleek and modern touch to your BMW's aesthetic. Designed with a universal fit, these exhaust tips are compatible with various BMW models, offering versatility and ease of installation.

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Set of Four are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips feature a stunning matte titanium finish and a slant-cut, single-wall outlet for a sleek appearance. Engineered for durability, they include chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Elegant matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a refined look
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

Correct toe settings contribute to both stable steering and even tire wear. The SPC Performance wheel toe bar tool is designed to prevent vehicle drifting and ensure uniform tire wear. It includes a steel bar equipped with sliding adjusters and pointers to accurately assess the vehicle's toe alignment.

For wider wheel bases use T#386442!

Engineered for ease of installation and compatibility with our Floor Mount Adapter sets or Race Seat Installation kits, this seat belt receptacle adapter kit offers a straightforward solution to maintain both legality and safety on the road and track.

Key Features:

Enables continued use of factory 3-point belts post race seat installation Flexible installation options allow for customization based on driver preferences Ensures adherence to legal requirements for street driving Effortless setup process for a hassle-free experience Upholds safety standards without compromising on performance

The Brey-Krause "Quick Release" Fire Extinguisher Mount is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware. 

Mount holds any 3" fire extinguisher

BMW enthusiasts looking to fabricate a custom exhaust project will find quality and price-friendly options in the ECS Tuning Universal Exhaust catalog. These select items feature the same premium benefits as our In-House Engineered Exhaust Systems, ensuring confidence in their quality and longevity.

Part Design:

• Made from T304 Stainless Steel for corrosion resistance with an attractive brushed finish
• 3.0" outside diameter (OD)
• 1.5mm (.060") wall thickness tubing for durability
• U-Bend Centerline Radius - 5.0" @ 180° angle
• Leg Length "A" - 7.0"
• Leg Length "B" - 14.0"
• Leg Length "C" - 27.0"

Product Development:

• Developed top-tier exhaust components through our In-House Engineered Exhaust Systems
• Direct-fit components for specific European applications now available for custom exhaust projects

Installation and Support:

• Universal parts with no direct fitment to any particular vehicle
• Custom welding and fabrication required
• Special prep/clean procedures must be followed for proper welding due to brushed finish

Elevate your BMW with ECS Tuning Universal Exhaust components, designed for quality and durability in custom exhaust projects.