Stud Conversion Kits for BMW F82 M4 S55 3.0L

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340355

Part#: MSI-M14X125

Ships on Jun 29, 2026

Starting at $ 25.98 USD

Add to Wish List

Starting at $ 25.98 USD

Add to Wish List

70MM, 80MM, OR 90MM OVERALL LENGTH
OUR HIGHEST-GRADE PREMIUM WHEEL STUD
DRY LUBE WITH BLACK M-PHOSPHATE COATING
STUD FOR RACE/TRACK USE
CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
USE WITH 14x1.5 NUT
For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
Heat-treated aircraft quality alloy steel
Developed from over 20 years of top level NASCAR use
These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

Sold per stud.
Wheel nuts sold separately.

Show More Show Less

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209837

Part#: BMS-ETLN20

Ships in 6 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts

Show More Show Less

Turbo-Lock Blue Medium Threadlocker (10ml Bottle)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:215383

Part#: 11-010BC

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Threadlocker is essential when doing any work to your car, especially prepping it for the track. Loose bolts should never happen! If you are a do-it-youselfer, or do much wrench turning, then you know about threadlocker (generically known as "locktite" or by the brand name Loctite). You also know a little goes a long way. This small bottle of Palm Labs Turbo-Lock blue threadlock is perfect for that small job -- or a few small jobs! This tube has 10 mL (0.34 fluid ounces) of moderate temp, medium-strength threadlocker. This bottle comes with two ways to apply: with a squeeze or with the included brush. There are just too many different uses for this, and no mechanic or DIYer, should be without some in his or her toolbox.

Red or Blue threadlocker? Red is the highest strength so use it when the fastener will not be removed regularly or ever again. The Red will need a great amount of force to break free and maybe even heat. Blue is the medium strength and will break free with hand tools. Use it for fasteners that need extra locking protection but will be removed / disassmebled on a semi-regular basis.

Palm Labs Turbo-Lock Blue Features:

color: blue

Anaerobic Thread-locking Compound

permanent

medium strength

moderate temperature resistant

oil resistant

primerless

acceptable up to 20mm (3/4") bolts
Equivalent or superior to Loctite 242.

MSDS Data Sheet
Technical Data Sheet

Show More Show Less

M14x1.5, 19mm Lug Nut - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641222

Part#: 40.0001BLK

In Stock

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Replacement M14x1.5 19mm Lug nut

17mm 14x1.5 Turner Black Zinc-Coated Wheel Nut

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:363993

Part#: 001467ECSX5

In Stock

Sale - Save 20% $ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 3.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 3.99 USD

Add to Wish List

17mm black lug nut to fit 14x1.5 thread wheel studs (common for most 2012+ BMWs). This is a super tough wheel stud nut in a standard 17mm size. The black finish is durable, corrosion-resistant, and stealthy so it blends in with dark-colored wheels. BMW designed their wheels to use a black bolt so more of the silver design 'pops' or is more eye-catching. These black wheel nuts preserve that effect. 17mm is the standard BMW bolt head size so you won't have to buy extra sockets. The seat is a standard diameter but may not fit all brands of wheels. If you have a small diameter bolt bore on your wheels, try our compact 19mm wheel nuts.

Priced per nut.

Show More Show Less

Turbo-Lock Red High-Strength Threadlocker (10ml Bottle)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:215382

Part#: 12-010BC

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Threadlocker is essential when doing any work to your car, especially prepping it for the track. Loose bolts should never happen! If you are a do-it-youselfer, or do much wrench turning, then you know about threadlocker (generically known as "locktite" or by the brand name Loctite). You also know a little goes a long way. This small bottle of Palm Labs Turbo-Lock red threadlock is perfect for that small job -- or a few small jobs! This tube has 10 mL (0.34 fluid ounces) of high-temp, high-strength threadlocker. This bottle comes with two ways to apply: with a squeeze or with the included brush. There are just too many different uses for this, and no mechanic or DIYer, should be without some in his or her toolbox.

Red or Blue threadlocker? Red is the highest strength so use it when the fastener will not be removed regularly or ever again. The Red will need a great amount of force to break free and maybe even heat. Blue is the medium strength and will break free with hand tools. Use it for fasteners that need extra locking protection but will be removed / disassmebled on a semi-regular basis.

Palm Labs Turbo-Lock Series 13-OR Features:

color: red/orange

Anaerobic Thread-locking Compound

permanent

high strength

high temperature resistant

oil resistant

primerless

acceptable up to 20mm (3/4") bolts
Equivalent or superior to Loctite 262.

MSDS Data Sheet
Technical Data Sheet

Show More Show Less

Project Cars

SELECT YOUR BMW

Stud Conversion Kits for BMW F82 M4 S55 3.0L

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

Turbo-Lock Blue Medium Threadlocker (10ml Bottle)

M14x1.5, 19mm Lug Nut - Black

17mm 14x1.5 Turner Black Zinc-Coated Wheel Nut

Turbo-Lock Red High-Strength Threadlocker (10ml Bottle)

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results