BMW Intake Parts for BMW F82 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

F06/F10/F12/F13/F80/F82/F83/F87 - S55/S63 - Dinan High Flow Drop-in R...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:18236095
Part#: D401-0042
In Stock
Sale - Save 10% $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.30 USD
Free Shipping
Sale - Save 10%
$ 95.99

This product was last offered at the strikethrough price on
09-29-2026

$ 86.30 USD
Free Shipping
Reduce your maintenance costs and increase your performance with Dinan's high-flow, washable, drop-in air filter! Using better breathing materials lets your engine make more power while not working as hard, giving you a reliable bump in engine performance! The air filters are a great alternative if a full intake system just is not possible at the moment, but no worries, Dinan has you covered!
Show More Show Less
Genuine BMW - Corporate Logo
T#:14621
Part#: 11617547242
In Stock
22% off MSRP $ 56.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.95 USD
Free Shipping on orders $49 and up
22% off MSRP
$ 56.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.95 USD
Free Shipping on orders $49 and up
This set of 6 gaskets is to seal the intake manifold to the cylinder head. These are absolutely crucial to prevent vacuum and intake air leaks and lean running conditions. These are also usually replaced when adding the 330 manifold to a 325, 328. Price is for a set of 6 - one for each intake runner. On cars with V8 engines 2 sets are required.
Show More Show Less
Genuine BMW - Corporate Logo
T#:30544
Part#: 11110392552
In Stock
2% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up


Genuine BMW Set Of Alu. Screws Crank Case
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Burger Motorsports - Corporate Logo
T#:583821
Part#: 3.5 BAR TMAP
Ships in 5 Business Days
$ 32.99 USD
Free Shipping on orders $49 and up
JB4 3.5 bar plug and play TMAP adapters

Genuine BMW - Corporate Logo
T#:539293
Part#: 13628644432
In Stock
8% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping
8% off MSRP
$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in your N55 engine's electronic control system. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU/DME). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion, efficiency, and ignition timing. Fits BMW Engines including: N20,N26,N55,N63,N63N,S55,S63N
Show More Show Less
Burger Motorsports - Corporate Logo
T#:28504212
Part#: BMS35TMAP-32
Back Ordered
$ 179.00 USD
Free Shipping on orders $49 and up
Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.
Show More Show Less

Genuine BMW - Corporate Logo
T#:22471
Part#: 13727843283
Ships on Oct 12, 2026
28% off MSRP $ 47.75

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.31 USD
Free Shipping on orders $49 and up
28% off MSRP
$ 47.75

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.31 USD
Free Shipping on orders $49 and up
Replacement air filter for stock airbox. Cylinders 5-8. Note this engine uses 2 filters. We sell the left and right filters individually.
Genuine BMW - Corporate Logo
T#:22472
Part#: 13727843284
Ships on Oct 12, 2026
24% off MSRP $ 44.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD
Free Shipping on orders $49 and up
24% off MSRP
$ 44.57

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD
Free Shipping on orders $49 and up
Replacement air filter for stock airbox. Cylinders 1-4. Note this engine uses 2 filters. We sell the left and right filters individually.

Replacement Filter for Carbon Fiber Intake
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:639080
Part#: D401-0022
In Stock
Sale - Save 10% $ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.56 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 63.99

This product was last offered at the strikethrough price on
09-28-2026

$ 57.56 USD
Free Shipping on orders $49 and up
Replacement Filter for High Flow Carbon Fiber Intake (D760-0045, D760-0051 & D760-0057). This is for one filter (D760-0051 or D760-0057), while two filters are required per car for the D760-0045 kit. Installation time for one filter is 0.25 hours (D760-0051, D760-0057) or 0.5 hours for two filters (D760-0045).
Show More Show Less

Genuine BMW - Corporate Logo
T#:198688
Part#: 13907848455
In Stock
4% off MSRP $ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping
4% off MSRP
$ 92.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping


Genuine BMW Sucking Jet Pump With Lines -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Genuine BMW - Corporate Logo
T#:37535
Part#: 11747797129
In Stock
4% off MSRP $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD
Free Shipping on orders $49 and up
Genuine BMW Vacuum Hose Black - 3,5X2,0
Mishimoto - Corporate Logo
T#:637355
Part#: MMINT-F80-15
EO#: D-759-13
Ships in 3 Business Days
$ 1,770.99

This product was last offered at the strikethrough price on
10-01-2026

$ 1,595.99 USD
$ 1,595.99 USD
BMW has a knack for maintaining its stake as the benchmark when it comes to performance luxury vehicles, with the F8X generation being no exception. The S55 that powers the 2015–2020 BMW F8X M3, M4 and M2 Competition is dripping with technology, which includes an air-to-water intercooler as a means of keeping cool. Where BMW’s intercooler design was enough to help bring this generation of mid-sized M’s to their peak, we here at Mishimoto found some weaknesses that we felt obliged to address. We started with the end tanks. The Mishimoto Performance Air-to-Water Intercooler features full, cast aluminum end tanks, TIG-welded to our bar-and-plate core for maximum durability as you increase the boost in your Bimmer. Our end tanks also include internal air diverters on both the inlet and outlet to ensure an even flow of charged air through the core. When it comes to the core, bigger is better, and we were able to expand the size of our core in all dimensions, resulting in a 29% increase in core volume while abstaining from any modifications when it comes to the installation. Our new core also features a unique single-pass internal fin layout for the coolant passage for optimal heat transfer from the charged air to the coolant. With our improvements combined, we saw the Mishimoto 2015–2020 BMW F8X M3 and M4 Performance Intercooler increase flow through the core by 16% and recorded a 12°F drop in intake air temperatures when tested with the Mishimoto Performance Heat Exchanger. We also recorded an average increase of 11 whp and 8 wtq during our testing with peak gains of up to 31 whp and 10 wtq. With the micro-wrinkle black finish and sleek header plate design, the Mishimoto Performance Air-to-Water Intercooler makes the perfect addition to your F8X build and looks right at home in the M’s engine bay. Like all of our products, the Mishimoto 2015–2020 BMW F8X M3, M4, and M2 Competition Performance Air-to-Water Intercooler is backed by the Mishimoto Lifetime Warranty for a lifetime of support for all of your performance needs. Features: Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition 29% increase in core volume 16% increase in flow Average power gains of 11 whp and 8 wtq when combined with Mishimoto Heat Exchanger 12°F drop in intake air temperatures with Mishimoto Heat Exchanger Unique single-pass core design for improved cooling capacity Cast aluminum end tanks with incorporated diverters for maximum flow Bar-and-plate core for maximum cooling efficiency Micro-wrinkle black powder-coated finish for sleek aesthetic in the engine bay Compatible with stock and Mishimoto charge pipes Mishimoto Lifetime Warranty Includes: (1) Performance Intercooler Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less


BMC - Corporate Logo
T#:398705
Part#: FB647/20
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Genuine BMW - Corporate Logo
T#:36571
Part#: 11617588624
In Stock
4% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping on orders $49 and up
Don't let a leaking gasket rob your performance. Replace it with a Genuine BMW gasket and enjoy smooth reliable performance.

Genuine BMW - Corporate Logo
T#:174407
Part#: 13717613157
Ships in 1-2 days
2% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Free Shipping on orders $49 and up


Genuine BMW Intake Duct -
This item fits the following BMW Chassis:
F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW - Corporate Logo
T#:200344
Part#: 17517846235
Ships in 1-2 days
6% off MSRP $ 966.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 907.99 USD
6% off MSRP
$ 966.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 907.99 USD


Genuine BMW Charge-Air Cooler -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Genuine BMW Manifold Absolute Pressure (MAP) Sensor - F8X F9X F85/86 ...
For vehicles with a production date from 07/2018+
Genuine BMW - Corporate Logo
T#:599874
Part#: 13628644433
Ships in 1-2 days
8% off MSRP $ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping
8% off MSRP
$ 162.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD
Free Shipping
The MAP sensor, or manifold absolute pressure sensor, works with the engine computer to set the fuel curve and give readings to the engine computer. If yours is faulty, it may cause improper running, rich or lean fuel curves, or other general performance issues. Replace yours with this unit to keep your engine running at full potential. For N54 applications, you will need adapter harness T#583821- This TMAP sensor is typically used in high-boost applications for the N54
Show More Show Less

Genuine BMW - Corporate Logo
T#:194764
Part#: 13717846272
In Stock
2% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
2% off MSRP
$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping


Genuine BMW Clean Air Pipe, Lower - Zyl. 4-6
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Mishimoto - Corporate Logo
T#:637356
Part#: MMHE-F80-15
EO#: D-759-13
Ships in 3 Business Days
$ 725.99 USD
Free Shipping
$ 725.99 USD
Free Shipping
Improve the cooling capacity for your 2015–2020 BMW M3 or M4 with the Mishimoto Performance Heat Exchanger. Air-to-water intercooling is a means of more efficient heat transfer from the charged air, but it now requires an additional heat exchanger mounted to the front of the vehicle in order to dissipate the transferred heat. The S55 powering the F8X generation of M’s packs quite a punch thanks to the A2W system. While the BMW engineers laid the foundation for dissipating heat from the intercooling system, we still saw some room to improve on their design. We started by eliminating any bits of plastic and promptly replaced the end tanks, including the inlet and outlet ports, with durable aluminum. We kept the dual-pass flow through the core for maximum cooling properties while expanding the core into the available space. Our new design features a 42mm thick core while extending the height by 150 mm, totaling in a 60% increase in core volume and a 180% increase in fin surface area. The end result of our improvements is a 10°F drop in global intercooling temperatures over the stock unit. Size isn’t the only thing that matters with this heat exchanger. Since the heat exchanger sits front and center in the M3 and M4’s cooling stack, it’s susceptible to damage from road debris. To keep your air-to-water system safe, our heat exchanger comes equipped with an optional steel mesh stone guard for an added layer of protection for the fins. We also incorporated a variable fin pitch for the lower 12 rows on the core in order to facilitate cooling to DCT-equipped M's. Finally, our 2015–2020 BMW F8X M3/M4 Performance Heat Exchanger includes the Mishimoto Lifetime Warranty for a worry-free install. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition 10°F drop in global intercooler coolant temperatures over stock 60% increase in core volume 180% increase in external fin surface area Increases intercooler coolant capacity by 0.6 gallons Full aluminum, TIG-welded construction Dual-pass design for maximum cooling Variable fin-pitch design for improved airflow to DCT cooler Includes optional stone guard for maximum protection against road debris Mishimoto Lifetime Warranty Included: (1) Performance Heat Exchanger (1) Stone Guard (1) Magnetic Drain Plug Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov. ​
Show More Show Less

Genuine BMW - Corporate Logo
T#:34987
Part#: 11417516128
In Stock
3% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up


Genuine BMW Sprocket
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55

Show More Show Less

Burger Motorsports Performance Intake - F8X M3/M4 S55
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:556787
Part#: BMS-S55-INT
Ships on Oct 27, 2026
$ 479.00 USD
$ 479.00 USD
In BMW's with the S55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow intake tubes and dual inverted performance cone filters. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Show More Show Less
Mishimoto Performance Charge Pipe Kit - F8X M2 M3 M4 S55
CARB certified for sale in all 50 states
Mishimoto - Corporate Logo
T#:637358
Part#: MMICP-F80-15
EO#: D-759-13
In Stock at Vendor
$ 479.99 USD
Free Shipping
$ 479.99 USD
Free Shipping
Keep the boost flowing through your BMW with the Mishimoto 2015+ BMW F8X M3/M4 Charge Pipe Kit. The air-to-water intercooler keeping IAT’s low is a system, and the stock charge pipes can be a weak link. Once the pressure is on, it’s not uncommon for the factory pipes to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F8X M3/M4 Charge pipes are a durable, full aluminum construction, expertly TIG-welded for a secure channel for the S55’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto 2015+ BMW F8X M3/M4 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation. Features: Direct fit for the 2015–2020 BMW M3, M4, and M2 Competition Full aluminum TIG-welded construction for maximum durability Unique cast midsection for perfect fitment between engine and air intake Includes bung for simple integration of methenol injection Designed for optimal airflow Includes matte black silicone couplers for a secure and stock-style connection to the intercooler Mishimoto Lifetime Warranty Included: (2) Charge Pipes (2) Silicone Couplers (4) Worm Gear Clamps Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:5788180
Part#: BMS-F-S55HE
Ships on Oct 27, 2026
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA
Show More Show Less


Mishimoto - Corporate Logo
T#:7640385
Part#: MMICP-F80-15CYMB
In Stock at Vendor
$ 495.99 USD
Free Shipping on orders $49 and up
Elevate both the performance and aesthetics of your BMW with the Mishimoto 2015+ BMW F8X M3/M4 color-matched charge pipe kit. The air-to-water intercooler is pivotal in maintaining low intake air temperatures (IATs), and the stock charge pipes can be a weak link in the system. When pressure mounts, factory pipes may develop splits at the plastic welds near the turbo or even burst along the seam, resulting in frustrating boost leaks. Crafted with durable, full aluminum construction, the Mishimoto F8X M3/M4 Charge Pipes undergo meticulous TIG-welding to ensure a secure channel for the S55 engine's boost. Engineered with optimal airflow in mind, these charge pipes feature a uniform shape from turbo to intercooler without compromising fitment. With the backing of the Mishimoto Lifetime Warranty, the 2015+ BMW F8X M3/M4 Charge Pipes promise a lifetime of exceptional performance and style enhancement for your vehicle.
Show More Show Less
Dinan Carbon Fiber Intake System - F8X M3/M4
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389284
Part#: D760-0045
Back Ordered
Sale - Save 10% $ 1,699.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,529.96 USD
Free Shipping
Sale - Save 10%
$ 1,699.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,529.96 USD
Free Shipping
Airflow efficiency and maximizing the potential of the stock intake design were the keys to development for the Dinan S55 intake. Dinan improves on the factory air box system by delivering more cool, dense air. The increased amount of air feeds into dual larger volume airboxes complete with larger cone filters that elicit a slightly more audible and sporty tone over its stock counterpart.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:16175682
Part#: BMSS55INT
Ships on Oct 27, 2026
$ 349.00 USD
$ 349.00 USD
Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS
Show More Show Less

Genuine BMW - Corporate Logo
T#:43430
Part#: 13717613156
Ships in 1-2 days
2% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 102.99 USD
Free Shipping on orders $49 and up


Genuine BMW Intake Manifold, Front -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,S55

Show More Show Less

Genuine BMW - Corporate Logo
T#:42664
Part#: 13627602038
Ships in 1-2 days
22% off MSRP $ 497.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.97 USD
Free Shipping
22% off MSRP
$ 497.76

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.97 USD
Free Shipping


Genuine BMW Hot-Film Air Mass Meter -
This item fits the following BMW Chassis:
E89 Z4,F06,F10,F12,F13,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I12 i8

Fits BMW Engines including:
N20,N26,S55,S63N

Show More Show Less
Genuine BMW - Corporate Logo
T#:14929
Part#: 13547597871
Ships in 1-2 days
6% off MSRP $ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD
Free Shipping
6% off MSRP
$ 714.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 670.99 USD
Free Shipping


Genuine BMW Throttle -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Burger Motorsports - Corporate Logo
T#:599637
Part#: TYPEB4BARADAPTER
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less
Genuine BMW - Corporate Logo
T#:36510
Part#: 11617535850
In Stock
14% off MSRP $ 18.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.19 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 18.82

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.19 USD
Free Shipping on orders $49 and up
Genuine BMW SCREW

Mishimoto - Corporate Logo
T#:25241773
Part#: MMCP-3035B
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

Genuine BMW - Corporate Logo
T#:6533
Part#: 07129952104
In Stock
$ 3.99 USD
Free Shipping on orders $49 and up
GENUINE BMW HOSE CLAMP 07129952104
Genuine BMW - Corporate Logo
T#:28904
Part#: 07129905541
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up


Genuine BMW Hex Nut With Plate
This item fits the following BMW Chassis:
E36 M3,E39 M5,E60 M5,E63 M6,E46 M3,E82 1M Coupe,E85 Z4M,E30,E34,E36,E38,E39,E46,E53 X5 X5,E63,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Show More Show Less


Genuine BMW - Corporate Logo
T#:198663
Part#: 11667847203
Ships in 1-2 days
6% off MSRP $ 876.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 823.99 USD
Free Shipping
6% off MSRP
$ 876.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 823.99 USD
Free Shipping


Genuine BMW Vacuum Pump -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Fits BMW Engines including:
S55

Genuine BMW - Corporate Logo
T#:399461
Part#: 13717542860
In Stock
Sale - Save 35% $ 6.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4.51 USD
Free Shipping on orders $49 and up
Sale - Save 35%
$ 6.99

This product was last offered at the strikethrough price on
05-02-2026

$ 4.51 USD
Free Shipping on orders $49 and up

This mounts the air box to the inside of the engine bay, preventing it from shaking and/or bouncing�around.

Genuine BMW Bump Stop
This item fits the following BMW Chassis:
E82 1M Coupe,E85 Z4M,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F02,F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Fits BMW Engines including:
N52,N52N,N54,N54T,N55,S54,S55
�

Show More Show Less
Mishimoto - Corporate Logo
T#:51039962
Part#: MMB-F80-PPCBS
Ships in 3 Business Days
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity and fluid dynamics of the S55’s induction system.

Mishimoto - Corporate Logo
T#:51039989
Part#: MMINT-F80-15CSO
EO#: D-759-13
Ships in 3 Business Days
$ 1,948.00 USD
Free Shipping on orders $49 and up
The Mishimoto Performance Intercooler focuses on streamlining the induction path to reduce turbocharger workload.

Mishimoto - Corporate Logo
T#:51039973
Part#: MMB-F80-PPCMW
Ships in 3 Business Days
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing air and fluid dynamics.
Mishimoto - Corporate Logo
T#:51039977
Part#: MMB-F80-PPCYMB
EO#: D-759-13
Ships in 3 Business Days
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack is designed to strengthen the structural integrity of the S55’s induction path while maximizing airflow and fluid dynamics.

Mishimoto - Corporate Logo
T#:51039970
Part#: MMB-F80-PPCMG
Ships in 3 Business Days
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while maximizing fluid dynamics.
Mishimoto - Corporate Logo
T#:51039983
Part#: MMINT-F80-15CBS
EO#: D-759-13
Ships in 3 Business Days
$ 1,770.99 USD
Free Shipping on orders $49 and up
This intercooler kit is a direct-fit solution that requires no modifications to your BMW.

Mishimoto - Corporate Logo
T#:51039974
Part#: MMB-F80-PPCSO
EO#: D-759-13
Ships in 3 Business Days
$ 2,926.00 USD
$ 2,926.00 USD
Eliminates risk of pipe-bursts by upgrading to mandrel-bent aluminum units.

Mishimoto - Corporate Logo
T#:51039985
Part#: MMINT-F80-15CLRG
EO#: D-759-13
Ships in 3 Business Days
$ 1,770.99 USD
$ 1,770.99 USD
The Mishimoto Performance Intercooler focuses on reducing induction tract restriction while improving the mechanical reliability of the cooling system.
Mishimoto - Corporate Logo
T#:51039961
Part#: MMB-F80-PPCAW
Ships in 3 Business Days
$ 2,926.00 USD
$ 2,926.00 USD
Reinforces the S55's cooling structure, ensuring adequate airflow and maximizing heat transfer efficiency.
Mishimoto - Corporate Logo
T#:51039982
Part#: MMINT-F80-15CAW
EO#: D-759-13
Ships in 2 Business Days
$ 1,770.99 USD
Free Shipping on orders $49 and up
Allows for more aggressive ignition timing and more consistent power delivery, making it an essential upgrade for both stock and stage-1 tuned vehicles.


Mishimoto - Corporate Logo
T#:51039987
Part#: MMINT-F80-15CMW
EO#: D-759-13
Ships in 3 Business Days
$ 1,948.00 USD
$ 1,948.00 USD
This intercooler upgrade focuses on maximizing volumetric efficiency by reducing air-side restriction.
Mishimoto - Corporate Logo
T#:51039969
Part#: MMB-F80-PPCLRG
Ships in 3 Business Days
$ 2,926.00 USD
$ 2,926.00 USD
This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing fluid dynamics.