BMW Intake Parts for BMW F82 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.
Sort By:

CSF High Performance Aluminum Heat Exchanger - Black Finish - F8X M3/...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
CSF - Corporate Logo
T#:598765
Part#: 8075V
In Stock
$ 699.00 USD
Free Shipping
$ 699.00 USD
Free Shipping
If you are looking to track your BMW, we recommend upgrading your front mount heat exchanger with this upgrade from CSF! CSF heat exchangers offer larger cores with greater cooling capacity. They feature their exclusive "B-Tube" technology--lighter, thinner aluminum material carefully formed in a "B" and brazed over the seam to seal. The design is stronger and offers better cooling efficiency than traditional "O" shaped tubes.
Show More Show Less
CSF Performance Top Mount Aluminum Charge-Air-Cooler - Black Finish -...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
CSF - Corporate Logo
T#:401242
Part#: 8082
In Stock
$ 1,695.00 USD
Free Shipping
$ 1,695.00 USD
Free Shipping
CSF have released their first-to-market cast endtank designed top-mount intercooler for the S55 3.0L engine.This liquid to air cored cooler from the ground up, utilizing multiple air dividers cast into the hot/cold side endtanks for optimized air flow. After development, extensive testing and analysis was performed to make sure they could get the highest performance possible from their design.
Show More Show Less
CSF Performance Top Mount Aluminum Charge-Air-Cooler - Raw Finish - B...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
CSF - Corporate Logo
T#:401241
Part#: 8082R
In Stock
$ 1,695.00 USD
Free Shipping
$ 1,695.00 USD
Free Shipping
CSF have released their first-to-market cast endtank designed top-mount intercooler for the S55 3.0L engine.This liquid to air cored cooler from the ground up, utilizing multiple air dividers cast into the hot/cold side endtanks for optimized air flow. After development, extensive testing and analysis was performed to make sure they could get the highest performance possible from their design.
Show More Show Less

Active Autowerke Cnc Aftercooler Cooling Kit - F8x S55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:5886968
Part#: 15-012
Ships in 3 Business Days
$ 2,849.99 USD
Free Shipping
$ 2,849.99 USD
Free Shipping
BMW's S55 motor is a modern marvel but one weak point, which Active identified is the entire cooling system for the intake which comprises the charge pipe, the aftercooler and the heat exchanger (or radiator). Finally there is a S55 aftercooler kit upgrade that is good enough to carry the Active Autowerke brand. Years of success in developing cars for motorsport has allowed Active to leverage its expertise to the top-mount charge air cooler on the F80 M3, F82 M4 and F87 M2 Competition. This aftercooler was made for the S55 and crafted using only high-grade aluminum to outperform the factory aftercooler in all situations from everyday driving to the toughest racing. The factory cooler was built to support a specific power target and environment. Many of you have increased the performance of the S55 which quickly overwhelms the stock cooler leading to heat soak and higher intake air temperatures which triggers the ECU to downgrade the performance until cooler air returns. Active's focus was not on a mass-market aesthetic add-on but a properly engineered improvement over the existing hardware. Active uses a tube-and-fin core designed specifically for the S55 and included turbulators to maximize the cooling efficiency in as small a package as possible. The end tanks are billet machined aluminum, not cast, folded, or bonded and ensure even distribution of the water throughout the internal aftercooler cores. High precision fittings, CNC machining, and TIG welding throughout ensures the highest quality construction to prevent pressure loss, and the lowest weight, in a bolt-on replacement. But Active also didn’t leave the aesthetics by the wayside as we dip the visible top of the aftercooler in a carbon fiber coating giving your installed cooling system a decidedly top market look to match the improved cooling performance. The Active silicone charge pipes for the F80 M3, F82/F83 M4 and the F87 M2 Competition improve the flow over the stock, compressed plastic pipes. The Active Silicone Charge Pipes allow you to maximize power on your F8X by securing all the boost that your S55 is making. These pipes replace the hot-side pipes leaving the turbos and into the top-mount aftercooler. The stock S55 charge pipes are notorious for developing hairline fractures at their plastic seams. These fractures or cracks are unnoticeable to the naked eye, but under boost pressure they open up leaking the desired charged air into the engine bay, and consequently can rob your S55 of it's full power potential. In addition, these leaks can trigger your S55's turbochargers to work harder to hit and maintain target boost pressure, potentially wearing them out sooner. Active uses silicone in this area because it will not contribute to heat soak and it's easier to mold for the correct clearances. Active uses a 5-layer silicone hose with all needed adapters and stainless hose clamps included. It fits perfectly with our CNC’d top-mount cooler.
Show More Show Less

Top Mount Charge-Air-Cooler - Alpine White W/ Black Pinstriping ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!
CSF - Corporate Logo
T#:11170598
Part#: 8082-AW-BP
Ships in 3 Business Days
$ 2,395.00 USD
Free Shipping
$ 2,395.00 USD
Free Shipping
CSF have released their first-to-market cast endtank designed top-mount intercooler for the S55 3.0L engine.This liquid to air cored cooler from the ground up, utilizing multiple air dividers cast into the hot/cold side endtanks for optimized air flow. After development, extensive testing and analysis was performed to make sure they could get the highest performance possible from their design. The core itself features a dual-core cross-flow design with 2-stage water cooling for maximum efficiency. The size of the cooler itself is 60% larger than stock to help remove as much heat as possible. Thanks to the success of this design, offering enhanced cooling and a much higher level of efficiency, Turner is happy to suggest this superior product! Features: World's 1st cast endtank designed top mount charge-air-cooler for the BMW S55 engine Multiple air dividers cast into both hot/cold side endtanks for optimized air flow through the custom designed liquid-to-air core 60% increase in core size Left/right, cross-flow, dual-pass core configuration with 2-stage water cooling for maximum efficiency and intake temperature reduction Designed with 3D scanning/rapid prototyping technology to ensure precise fit and maximum surface area Bolt-on design for easy plug-and-play installation ​Lifetime warranty Fits the following BMWs: F80/82/83 BMW M3 & M4 S55 3.0L Turbo
Show More Show Less