BMW Intake Parts for BMW F82 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6
BMC Performance Air Filter - F06 F10 F12 F80/2 M3 M4 M5 M6
BMC - Corporate Logo
T#:398705
Part#: FB647/20
In Stock at Vendor
$ 207.99 USD
Free Shipping
Add to Wish List
$ 207.99 USD
Free Shipping
Add to Wish List
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Vargas Turbo Silicone Charge pipes - Blue - S55
Vargas Turbo Silicone Charge pipes - Blue - S55
Vargas Turbo Technologies - Corporate Logo
T#:390441
Part#: VPP-S55-SIL-1B
Ships in 10 Business Days
$ 418.99 USD
Free Shipping
Add to Wish List
$ 418.99 USD
Free Shipping
Add to Wish List
Looking to get the most efficient turbocharger operation out of your S55 powered BMW? The best way to do this is to remove all restriction from the inlet, and charge tract. The factory charge pipes are poorly designed due to being completely flattened coming out of the turbos, before the intercooler. These VTT S55 silicone charge pipes get rid of those restrictions and provide a full 2″ ID from the turbochargers into the intercooler, as well as not allowing any heat soak to occur like other aluminum pipes on the market. The VTT charge pipes are a full 7 ply wire reinforced silicone, with an extra layer of silicone on the interior, tested to over 150psi. They are available in 3 colors. Black with a Blue interior layer, Blue with a Red interior layer, and Red with a Black interior layer. These charge pipes fit all S55 powered BMW M3/M4’s.
Show More Show Less
Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82 F83 - S55
Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...
Burger Motorsports - Corporate Logo
T#:5788180
Part#: BMS-F-S55HE
Ships on Aug 6, 2026
$ 599.00 USD
Free Shipping
Add to Wish List
$ 599.00 USD
Free Shipping
Add to Wish List
This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA
Show More Show Less
BMW S55 3.0L Silicone Charge pipes - Red
BMW S55 3.0L Silicone Charge pipes - Red
Vargas Turbo Technologies - Corporate Logo
T#:390442
Part#: VPP-S55-SIL-1R
Ships in 10 Business Days
$ 418.99 USD
Free Shipping
Add to Wish List
$ 418.99 USD
Free Shipping
Add to Wish List

Upgrade Your S55 Powered BMW with VTT S55 Silicone Charge Pipes

Enhance turbocharger operation efficiency with VTT S55 Silicone Charge Pipes for your BMW. These pipes remove restrictions in the inlet and charge air tract, ensuring a full 2" ID from the turbochargers to the intercooler. Unlike factory pipes, which restrict airflow due to flattening, VTT charge pipes optimize airflow. Constructed of 7-ply wire reinforced silicone, they withstand over 150psi and feature an additional silicone layer for reduced heat soak. Choose from three color options: Black with Blue interior, Blue with Red interior, or Red with Black interior. This kit includes 2 silicone charge pipes, 2 billet turbocharger outlet adapters, and stainless steel clamps for easy installation on all S55 powered BMW M3/M4's.

Benefits:

  • Eliminates restrictions for efficient turbocharger operation
  • Provides a full 2" ID from turbochargers to intercooler
  • Reduces potential heat soak with silicone construction
  • Durable design tested to over 150psi
  • Available in 3 color options: Black/Blue, Blue/Red, Red/Black
Show More Show Less
Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4
Macht Schnell Intake Charge Scoop Set (Black) - F8X M3/M4
Macht Schnell - Corporate Logo
T#:5886935
Part#: 19.12.11XBLK
Ships in 8 Business Days
$ 125.00 USD
Free Shipping
Add to Wish List
$ 125.00 USD
Free Shipping
Add to Wish List
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4
Macht Schnell Intake Charge Scoop Set (Red) - F8X M3/M4
Macht Schnell - Corporate Logo
T#:4662381
Part#: 19.12.11X
Ships in 8 Business Days
$ 125.00 USD
Free Shipping
Add to Wish List
$ 125.00 USD
Free Shipping
Add to Wish List
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
AMS Performance BMW M3/M4/M2C S55 Charge Pipes (F80/F82/F83/F87)
AMS Performance BMW M3/M4/M2C S55 Charge Pipes (F80/F82/F83/F87) ...
AMS Performance - Corporate Logo
T#:39295563
Part#: AMS.39.09.0001-1
Ships in 2 Business Days
$ 674.95 USD
Free Shipping
Add to Wish List
$ 674.95 USD
Free Shipping
Add to Wish List
Vargas Silicone Charge Pipes - Red - BMW F8X M2, M3, M4
Vargas Silicone Charge Pipes - Red - BMW F8X M2, M3, M4
Vargas Turbo Technologies - Corporate Logo
T#:51813337
Part#: VTT-S55-SIL-1-RD
Ships in 10 Business Days
New Item
$ 409.99 USD
Free Shipping
Add to Wish List
$ 409.99 USD
Free Shipping
Add to Wish List
Upgrade your engine bay’s durability and style with the Vargas Red Silicone Charge Pipe.
Vargas Silicone Charge Pipes - Blue - BMW F8X M2, M3, M4
Vargas Silicone Charge Pipes - Blue - BMW F8X M2, M3, M4
Vargas Turbo Technologies - Corporate Logo
T#:51813336
Part#: VTT-S55-SIL-1-BL
Ships in 10 Business Days
New Item
$ 409.99 USD
Free Shipping
Add to Wish List
$ 409.99 USD
Free Shipping
Add to Wish List
Upgrade your S55 engine's breathability with the VTT Silicone Charge Pipe Bundle in blue.
3 Gallon F3x/F8x Stealth Tank
3 Gallon F3x/F8x Stealth Tank
Burger Motorsports - Corporate Logo
T#:558169
Part#: 3G-STMT-F3XF8X
Ships on Aug 6, 2026
$ 229.00 USD
Free Shipping
Add to Wish List
$ 229.00 USD
Free Shipping
Add to Wish List
Neatly hides away in the trunk cavity below the deck lid. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick, clean, and completely stealthy installation. The bottom of the tank includes a sump and baffle, allowing for consistent performance even as the tank drains. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Features & Benefits Pump mounts directly to the tank (pump sold separately) Works with all DDP 5800 pumps Super low profile design hides under the deck in the existing trunk cavity Available in clear for visually checking fluid levels Includes 2-way vented black plastic cap Threaded mounting points in the feet of the tank Includes a compression pump feed fitting Made in the USA Tank dimensions: L 26.75" x W 9.75" X H 7.5"
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Special Offers

Shipping