BMW Intake Parts for BMW F82 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Febi MAP Sensor
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:16375101
Part#: 13627599042
Ships in 5 Business Days
$ 63.99 USD
Free Shipping on orders $49 and up
$ 63.99 USD
Free Shipping on orders $49 and up
A faulty MAP sensor can upset the fuel mixture and ignition timing, causing a surge, rough idle, and a rich fuel condition which can lead to spark plug fouling and a loss of power and fuel economy. ​The Manifold Absolute Pressure sensor provides pressure information to the engine control unit to calculate air density for determining the engine’s air mass flow rate.
Show More Show Less
FTP Motorsport - Corporate Logo
T#:598513
Part#: SG71448
Ships on Sep 29, 2026
$ 330.00 USD
Free Shipping
$ 330.00 USD
Free Shipping

Enhance the performance of your BMW with the S55 Turbo Intake Pipe. Designed to address the limitations of the original pipe, this upgrade is essential for boosting the turbocharger or increasing boost value. By improving airflow into the turbo, this intake pipe enhances turbo response, increases airflow, and reduces turbo lag. Enjoy increased flow and a direct OEM replacement with this 3-ply silicon coupler intake pipe.

Benefits:

  • Improves turbo response
  • Increases airflow
  • Reduces turbo lag
  • Direct OEM replacement for easy installation
Show More Show Less

FTP Motorsport - Corporate Logo
T#:578679
Part#: SG71350
Ships on Sep 29, 2026
$ 470.00 USD
Free Shipping
$ 470.00 USD
Free Shipping
This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug
Show More Show Less

Macht Schnell - Corporate Logo
T#:4662381
Part#: 19.12.11X
Ships in 8 Business Days
$ 125.00 USD
Free Shipping
$ 125.00 USD
Free Shipping
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
Macht Schnell - Corporate Logo
T#:5886935
Part#: 19.12.11XBLK
Ships in 8 Business Days
$ 125.00 USD
Free Shipping
$ 125.00 USD
Free Shipping
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less

Macht Schnell - Corporate Logo
T#:5886933
Part#: 19.12.11XYEL
Ships in 8 Business Days
$ 125.00 USD
Free Shipping on orders $49 and up
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less
Macht Schnell - Corporate Logo
T#:5886934
Part#: 19.12.11XBLU
Ships in 8 Business Days
$ 125.00 USD
Free Shipping on orders $49 and up
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less

FTP Motorsport - Corporate Logo
T#:5788173
Part#: GS55S63
Special Order: No Guaranteed ETA
$ 130.00 USD
Free Shipping on orders $49 and up
FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:21407051
Part#: ATK-BM-0021-CF
Ships in 7 Business Days
$ 180.00 USD
Free Shipping on orders $49 and up
Designed to scoop air straight into the intake providing your engine with more cool air and resulting in better performance, this Autotecknic dry carbon air duct is a no-brainer for your car. Not only does it provide you with better performance, but you also get a subtle but more aggressive look on your M3/M4! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed autoclave to cure properly. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.
Show More Show Less
Active Autowerke - Corporate Logo
T#:5886968
Part#: 15-012
Ships in 3 Business Days
$ 2,849.99 USD
Free Shipping
$ 2,849.99 USD
Free Shipping
BMW's S55 motor is a modern marvel but one weak point, which Active identified is the entire cooling system for the intake which comprises the charge pipe, the aftercooler and the heat exchanger (or radiator). Finally there is a S55 aftercooler kit upgrade that is good enough to carry the Active Autowerke brand. Years of success in developing cars for motorsport has allowed Active to leverage its expertise to the top-mount charge air cooler on the F80 M3, F82 M4 and F87 M2 Competition. This aftercooler was made for the S55 and crafted using only high-grade aluminum to outperform the factory aftercooler in all situations from everyday driving to the toughest racing. The factory cooler was built to support a specific power target and environment. Many of you have increased the performance of the S55 which quickly overwhelms the stock cooler leading to heat soak and higher intake air temperatures which triggers the ECU to downgrade the performance until cooler air returns. Active's focus was not on a mass-market aesthetic add-on but a properly engineered improvement over the existing hardware. Active uses a tube-and-fin core designed specifically for the S55 and included turbulators to maximize the cooling efficiency in as small a package as possible. The end tanks are billet machined aluminum, not cast, folded, or bonded and ensure even distribution of the water throughout the internal aftercooler cores. High precision fittings, CNC machining, and TIG welding throughout ensures the highest quality construction to prevent pressure loss, and the lowest weight, in a bolt-on replacement. But Active also didn’t leave the aesthetics by the wayside as we dip the visible top of the aftercooler in a carbon fiber coating giving your installed cooling system a decidedly top market look to match the improved cooling performance. The Active silicone charge pipes for the F80 M3, F82/F83 M4 and the F87 M2 Competition improve the flow over the stock, compressed plastic pipes. The Active Silicone Charge Pipes allow you to maximize power on your F8X by securing all the boost that your S55 is making. These pipes replace the hot-side pipes leaving the turbos and into the top-mount aftercooler. The stock S55 charge pipes are notorious for developing hairline fractures at their plastic seams. These fractures or cracks are unnoticeable to the naked eye, but under boost pressure they open up leaking the desired charged air into the engine bay, and consequently can rob your S55 of it's full power potential. In addition, these leaks can trigger your S55's turbochargers to work harder to hit and maintain target boost pressure, potentially wearing them out sooner. Active uses silicone in this area because it will not contribute to heat soak and it's easier to mold for the correct clearances. Active uses a 5-layer silicone hose with all needed adapters and stainless hose clamps included. It fits perfectly with our CNC’d top-mount cooler.
Show More Show Less
Macht Schnell - Corporate Logo
T#:5886936
Part#: 19.12.11XORN
Ships in 8 Business Days
$ 125.99 USD
Free Shipping on orders $49 and up
Macht Schnell Intake Charge Scoops assist in air delivery by diverting cold, fresh air through the kidney grilles into the airbox. This allows for a noticeable power gain found at higher speeds especially on vehicles equipped with our High Performance Filters. The scoops are constructed from steel and powdercoated, guaranteed to prevent bending and rusting even after years of use. Priced per pair.
Show More Show Less


FTP Motorsport - Corporate Logo
T#:36269410
Part#: SG71350-Y
Special Order: No Guaranteed ETA
$ 570.00 USD
Free Shipping on orders $49 and up

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow)

FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow) is the ultimate performance upgrade for BMW enthusiasts looking to enhance their engine's reliability and style. Available through Turner Motorsport, this high-quality kit is specifically designed for BMW F80 M3 and F82 M4 models equipped with the powerful S55 engine.

This upgrade replaces the fragile OEM charge pipe and boost pipe with a durable, crack-resistant solution that ensures optimal airflow and performance under high-boost conditions. The eye-catching yellow finish not only adds a custom look to your engine bay but also reflects the premium craftsmanship FTP Motorsports is known for.

Key Features and Benefits

  • Precision-engineered for BMW F80 M3 and F82 M4 models with S55 engines
  • Constructed from durable materials to withstand extreme boost pressures and temperatures
  • Optimized for smooth, unrestricted airflow to enhance turbo response and performance
  • Vibrant yellow finish for a stylish and unique engine bay upgrade
  • Eliminates cracking and failure common in OEM components
  • Direct-fit design for easy installation without modifications
  • Perfect for track and street performance applications

Upgrade your BMW F80 M3 or F82 M4 with the FTP Motorsports - Full Color Charge Pipe + Boost Pipe F80/F82 S55 M3/M4 (Yellow), available now at Turner Motorsport for improved performance, reliability, and style.

Show More Show Less
Febi Mass Air Flow Sensor (MAF)
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:16375113
Part#: 13627602038
Special Order: No Guaranteed ETA
$ 142.99 USD
Free Shipping on orders $49 and up


Febi Air Mass Meter -
This item fits the following BMW Chassis:
E89 Z4,F06,F10,F12,F13,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I12 i8

Fits BMW Engines including:
N20,N26,S55,S63N

Show More Show Less