BMW F30 E9X TMAP Sensors & PNP Adapters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harne...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28504212

Part#: BMS35TMAP-32

In Stock

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599637

Part#: TYPEB4BARADAPTER

Ships in 3 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

Burger Motorsports Performance Intake - F8X M3/M4 S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:556787

Part#: BMS-S55-INT

Ships on Jun 19, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

In BMW's with the S55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow intake tubes and dual inverted performance cone filters. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Show More Show Less

BMS Performance Intake - Red Filters - F8X M2/M3/M4 S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:16175682

Part#: BMSS55INT

Ships on Jun 19, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Gain up to 10+whp along with terrific sound High quality S55 intake inspired by the BMS Elite S55 intake. It retains everything that is good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match. During our dyno testing the Elite BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling! Installation is easy and fully reversible. Includes BMS proprietary high flow filters that can be cleaned every 15-20k miles using an S&B cleaning kit and will last the life of the car. Our intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation. Includes new O-RINGS for the MAF sensors to ensure a clean fitment and seal. FEATURES AND BENEFITS Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Now available with red or blue filters Looks great under the hood Cleanable and reusable filters Vehicle Fitment 2018-2021 F87 M2 Competition (S55 engine) 2015-2020 F80 M3 2015-2020 F82, F83 M4, GTS

Show More Show Less

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5788180

Part#: BMS-F-S55HE

Ships on Jun 19, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

This direct bolt-in intercooler upgrade is a high-quality heavy-duty replacement heat exchanger that dramatically improves turbo/inlet air cooling by providing double the cooling surface area and over three times the fluid volume compared to the factory cooler. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Dramatically improves turbo/inlet air cooling Double the cooling surface area of the factory unit No modification install and removal Increases turbo efficiency in extended runs Made in the USA

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

AEM V3 Water/Methanol Injector Kit (Qty 2)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815166

Part#: 30-3313

In Stock

$ 110.99

This product was last offered at the strikethrough price on
03-31-2026

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:369781

Part#: 30-3000

Ships in 5 Business Days

$ 579.99 USD

Add to Wish List

Qty

$ 579.99 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller “Boost Safe” readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590418

Part#: 30-3304

Ships on Jun 29, 2026

$ 211.99

This product was last offered at the strikethrough price on
06-03-2026

$ 180.99 USD

Add to Wish List

Qty

$ 180.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

JB4 Universal Water/Methanol Injection Kit & Stainless Steel Brai...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26271799

Part#: WMIK-UNI-12S3

In Stock

$ 810.00 USD

Add to Wish List

Qty

$ 810.00 USD

Add to Wish List

Upgrade your BMW with the JB4 Universal Water/Methanol Injection (WMI) Kit, a versatile solution designed to enhance both power and reliability. Engineered to seamlessly integrate with a variety of vehicles, this innovative kit offers a universal solution for enthusiasts seeking optimized performance and engine protection.

Enhanced Performance: Boost engine power and torque for an exhilarating driving experience.
Engine Protection: Safeguard your engine from potential damage with precise injection of water and methanol, reducing temperatures and preventing harmful detonation.
Improved Fuel Economy: Promote more efficient combustion, leading to better fuel economy and reduced emissions.
Easy Installation: With its universal design, installation is hassle-free, providing a convenient upgrade solution for a wide range of vehicles.
Advanced Technology: Equipped with adjustable injection rates and integrated safety mechanisms, ensuring optimal performance and reliability.

Upgrade your BMW's performance with the JB4 Universal Water/Methanol Injection Kit and enjoy the perfect blend of power, efficiency, and engine protection.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

BMS JB4 Port Injection Controller - F/G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012590

Part#: F-G-PORTINJCONMO

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

3 Gallon F3x/F8x Stealth Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558169

Part#: 3G-STMT-F3XF8X

Ships on Jun 19, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

Neatly hides away in the trunk cavity below the deck lid. The Water/Methanol Injection (WMI) pump mounts directly to the bottom of the tank allowing for a quick, clean, and completely stealthy installation. The bottom of the tank includes a sump and baffle, allowing for consistent performance even as the tank drains. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Features & Benefits Pump mounts directly to the tank (pump sold separately) Works with all DDP 5800 pumps Super low profile design hides under the deck in the existing trunk cavity Available in clear for visually checking fluid levels Includes 2-way vented black plastic cap Threaded mounting points in the feet of the tank Includes a compression pump feed fitting Made in the USA Tank dimensions: L 26.75" x W 9.75" X H 7.5"

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jun 19, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jun 18, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

AEM Water/Methanol Injection System

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815164

Part#: 30-3326

In Stock

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

AEM’s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8” NPT ports with included push-to-lock ¼” hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It’s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8”- 27 NPT inlet/outlet with included ¼” push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Water/Methanol Injection Hose - 20'

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176934

Part#: BMS-WMI-SOL

Ships on Jun 19, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

WMI Inline Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176933

Part#: BMS-WMI-FIL

Ships on Jun 19, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Jul 1, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW F82 M4 S55 3.0L

Sub-Categories

BMW F30 E9X TMAP Sensors & PNP Adapters

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harne...

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

Burger Motorsports Performance Intake - F8X M3/M4 S55

BMS Performance Intake - Red Filters - F8X M2/M3/M4 S55

Burger Motorsports High Capacity Intercooler Heat Exchanger - F80 F82...

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

1 Gallon Methanol Tank - Clear/White

AEM V3 Water/Methanol Injector Kit (Qty 2)

BMS DDP5800 Water/Methanol Injection Pump

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

JB4 Universal Water/Methanol Injection Kit & Stainless Steel Brai...

2 Gallon Low Profile Universal Methanol Tank

BMS JB4 Port Injection Controller - F/G Chassis

3 Gallon F3x/F8x Stealth Tank

1.25 Gallon Heavy-Duty Universal Methanol Tank

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

AEM Water/Methanol Injection System

Water/Methanol Injection Hose - 20'

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

WMI Inline Filter

Super Atomizing Water/Methanol Injection Nozzles

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results