BMW F83 M4 S55 3.0L

BMW / MINI Jack Pad Adapter Various BMW & Mini Models

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582235

Part#: PF5-4660

In Stock

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Enhance your BMW or MINI lifting experience with the Powerflex BMW & MINI jack pad adapter. Specifically crafted to snugly fit into the plastic lifting points of your vehicle, this adapter ensures lift stability while safeguarding the underside. Experience a secure and safe jack point, with added height to protect against rocker panel contact. A valuable addition for anyone using a floor jack to maintain their BMW or MINI.

Ensures lift stability
Protects the vehicle's underside
Provides a secure and safe jack point
Adds extra height to prevent rocker panel contact
Compatible with various BMW and MINI models

This part replaces OEM Part Numbers: 51717039760, 51717123311, and 51718268885

Only with jack pad retrofit kit: Countryman / Paceman

Show More Show Less

Powerflex Rear Diff Rear Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554716

Part#: PFR5-4026

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Billet Oil Filter Cap

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

Powerflex Dual Mount Diff Bracket - BMW F8X M2/M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14023858

Part#: PFR5-4030

In Stock

$ 309.99 USD

Add to Wish List

Qty

$ 309.99 USD

Add to Wish List

NOTE: We suggest replacing 3 of BMW # 31126760203 during installation Kit comes supplied with M14 mounting bolt, thread locker, and a Powerflex keyring. With the newer F8x M2/M3/M4's making big power and having superb chassis straight from the showroom, it's no wonder they're often found at the most serious of track-days or at tuning shops around the globe. Unfortunately, the power that makes these cars so fun to drive eventually has an impact on the vehicles' suspension components- most notably the rear differential bushings. Despite having alloted for two mounting bushings on the factory tubular subframe, BMW opts to use only a single offset bushing in the rear to mount the diff bracket to the subframe. This essentially creates a pivot point for the diff under torque loading, especially if the 4x front diff bushes are worn out and softer than they once were. With hard launches and sudden and frequent on-off throttle changes, the single rear OE rubber bushing is subject to extreme torsional and directional forces, resulting in rapid degradation with failure often seen at around the 30,000-40,000 mile mark, and an unsettled and potentially clunky rear-end. The PFR5-4030 Dual Mount Diff Bracket is made from our in-house CNC machined 6082 High-Tensile Aluminum, and is designed to utilize the secondary mounting position on the OE subframe. With the addition of a second bushing, this prevents the diff from twisting under load, providing benefits such as: Reduced drivetrain movement Improved throttle response A more controlled and consistent chassis response to acceleration/deceleration Improved tire-to-road power transfer due to reduced wheel hop Reduced strain on bushings The corrosion-resistant, satin black, anodized aluminum bracket is optimized for high stress and deflection while withstanding high torque loads, but serves the same purpose in road-use and track-use cars with either a single OE bushing or dual aftermarket bushings. Although the bracket can be fitted without the need to remove the subframe from the vehicle completely, we would strongly recommend combining Powerflex products by using our already hugely popular 80A durometer PFR5-4026 Rear Diff Rear Mounting Bushings for both rear mounting positions alongside our PFR5-4025 Rear Diff Front Mounting Bushings in the front for the ultimate in differential control and a lasting street or track solution.

Show More Show Less

Powerflex Differential Dual-Mount Bushing & Bracket Set - Street Bush...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37925919

Part#: PFR54030KT

In Stock

$ 876.99 USD

Add to Wish List

Qty

$ 876.99 USD

Add to Wish List

Lock your differential down with this complete kit featuring Powerflex's Dual-Mount bracket and street bushings

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Port Injector Plugs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

BMW / MINI Jack Pad Adapters - Blue - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31522930

Part#: BMWJACKPADBLUE4

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

Powerflex BMW F2X - F3X - F87 M2 - F80 M3 - F82 - F83 M4 Shifter Arm ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:33880036

Part#: PFF5-1932

In Stock

$ 107.99 USD

Add to Wish List

Qty

$ 107.99 USD

Add to Wish List

The Powerflex Shifter Arm Rear Bushing & Bracket for the BMW F2X, F3X, F87 M2, F80 M3, F82, and F83 M4 is designed to improve gear shifting precision and reduce the play and movement in the gear shifter assembly. This bushing and bracket kit replaces the factory rubber bushing with a stiffer polyurethane bushing, which helps enhance the overall feel and responsiveness of the shifter.

Key Features:

Material: Made from high-performance polyurethane, offering greater durability compared to the factory rubber bushings.
Improved Shifting Precision: Reduces shifter arm movement, providing a more direct and precise shifting experience.
Longevity: Resistant to wear, oil, and contaminants, ensuring long-lasting performance.
Performance-Oriented: Suitable for both street and track use, designed to reduce flex and movement in the shifter assembly.
Compatibility: Tailored specifically for the BMW F2X (1 Series, 2 Series), F3X (3 Series, 4 Series), F87 (M2), F80 (M3), F82 (M4), and F83 (M4 Convertible) models.

Benefits:

Enhanced gear shifting feedback.
Reduced sloppiness in the shifter arm.
Retains alignment during aggressive driving or on rough surfaces.

This upgrade is ideal for drivers looking for a more precise, performance-oriented driving experience with their BMW.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554720

Part#: PFR5-4025X4

In Stock

$ 346.99 USD

Add to Wish List

Qty

$ 346.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28504212

Part#: BMS35TMAP-32

In Stock

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

BMW F8X M2 M3 M4 Chassis Bracing

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4070463

Part#: F-BRACE

Ships in 1 Business Day

$ 99.00

This product was last offered at the strikethrough price on
02-23-2026

$ 94.00 USD

Add to Wish List

Qty

$ 94.00 USD

Add to Wish List

BMW F8X M2 M3 M4 Chassis Bracing

The BMW F8X M2 M3 M4 Chassis Bracing is designed to enhance the rigidity and stability of the chassis, providing improved handling and performance for your BMW. Turner Motorsport offers this high-quality brace to support better driving dynamics and reduced flex during aggressive driving.

Benefits:

Enhanced Rigidity: Significantly increases chassis stiffness, leading to improved handling and reduced body roll.
Improved Stability: Minimizes chassis flex for more precise steering responses and better overall control.
High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability.
Easy Installation: Designed for straightforward installation with minimal modifications required.
Optimized Performance: Perfect for both street and track use, enhancing the driving experience and vehicle performance.

Show More Show Less

Powerflex Engine Mount Inserts - F8X M2/M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6924327

Part#: PFF5-4021

In Stock

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings, while improving performance and allowing for a more engaging driving experience. Powerflex is pleased to introduce their new S55 Engine Mount Inserts, intermediate alternatives to the BMW aluminum inserts and much stiffer full replacement engine mounts available on the aftermarket. Made in Yellow 70A durometer material, they are designed to fit the OE mounts snuggly to restrict engine movement with a minimal increase in NVH, perfect for those with tuned road cars. Their design and flexibility also mean they can be fitted to the vehicle without removing the engine mounts themselves. Reducing engine/transmission movement by way of upgraded inserts has the following benefits: Sharper throttle response Improved gear shifting More direct power transfer More balanced on/off throttle handling Prolonged life of the OE mounts A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine and chassis. The harder the material used, the greater the NVH transmitted.

Show More Show Less

BMW F8X & G8X M2 / M3 / M4 Powerflex Rear Diff Rear Mounting Bushing ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554715

Part#: PFR5-4026B

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

BMS Oil Catch Can - S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621421

Part#: BMS-OCC-S55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Includes 18" NBT bung The S55 BMW turbo engine often faces oil control challenges, resulting in oil blow-by that contaminates the intercooler and charge piping, clogs intake valves and the VANOS system, lowers effective octane, and diminishes engine performance—especially at higher boost levels. The BMS Oil Catch Can provides the ultimate solution. Unlike generic catch cans that suffer from poor mounting, restrictive baffles, inadequate ventilation, or improper PCV integration, the BMS OCC is specifically engineered for turbo BMW applications. Key Features: ✅ CNC-machined precision construction—seamless design for a perfect fit and long-lasting durability ✅ Optimized hose diameter and flow rate—prevents crankcase pressure buildup ✅ Fully sealed PCV system—ensures no vapor leaks into the atmosphere ✅ Strategic mounting location—minimizes line length for efficient performance and a stealthy install ✅ Fast 20-minute installation—comes with all necessary hardware and is easily reversible ✅ Simple oil disposal—drain via the plug or removable base during oil changes Proudly made in the USA, the BMS Oil Catch Can delivers long-term engine protection while optimizing performance and reliability.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

Active Autowerke High Flow Catted Downpipes - F8X S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2393422

Part#: 11-080

Ships in 3 Business Days

$ 2,849.99 USD

Add to Wish List

Qty

$ 2,849.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. Developed for precise fitment on the F87 M2C, F80 M3 and F82 BMW M4, the difference in performance will be noticeable the moment you leave your driveway! Features: NO CEL when using this downpipe Quicker turbo spool and response Less restrictive, more free flowing Improved low end and mid range performance as well as higher boost levels GESI EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment Withstands up to 1500F Can reach operational efficiency within 9 seconds of startup Easily bolts-on with no cutting or welding required Accepts OEM O2 sensor heat shield Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESI proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Made in Miami, Florida

Show More Show Less

Powerflex Transmission Mount Bushing - Street

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9771556

Part#: PFF5-4655

Ships on Sep 14, 2026

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Secure your gearbox and sharpen shifting response. These 150% stiffer polyurethane transmission mounts isolate drivetrain twist to protect against track mis-shifts and maximize corner-exit power delivery

Show More Show Less

Powerflex Shifter Arm Rear Bushing - Street - 3 Series / 5 Series / Z...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22064632

Part#: PFF5-4632

In Stock

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

When it comes to elevating the driving experience and precision of your BMW 3 Series, 5 Series, or Z Series, the Powerflex Aftermarket Shifter Arm Rear Bushing represents an essential upgrade you can't afford to overlook. This top-notch automotive component delivers a multitude of benefits that not only enhance your control and performance but also contribute to the long-term well-being of your beloved BMW. Enhanced Gear Shifting Precision: The Powerflex Aftermarket Shifter Arm Rear Bushings have been expertly engineered to facilitate smoother and more precise gear shifts. This transformation results in a heightened level of control and agility, elevating your driving experience to new heights. Reduction in Play and Vibration: These specialized bushings effectively minimize play and vibration in the shifter arm, thereby creating a more stable and comfortable driving environment. Bid farewell to excessive movement, and welcome a journey characterized by smoother, quieter rides. Enhanced Durability: Powerflex's commitment to quality is evident in the construction of these bushings, as they are meticulously crafted from high-quality materials. This dedication ensures that they can withstand the daily stresses of driving, providing long-lasting performance and peace of mind. Cost-Effective Performance Enhancement: Opting for the Powerflex Aftermarket Shifter Arm Rear Bushings is a cost-effective means of enhancing your BMW's gear-shifting performance. This upgrade offers substantial improvements without putting undue strain on your budget. Tailored Compatibility with Various BMW Models: Powerflex offers specialized Aftermarket Shifter Arm Rear Bushings explicitly designed to seamlessly integrate with your BMW 3 Series, 5 Series, or Z Series. This tailored approach guarantees a perfect fit, irrespective of your specific BMW model. OE / OEM Cross Reference Numbers: 25111222015 / 25111221736 Fits these BMW models: 2008-2013 E82 BMW 128i 135i 135is 1M Coupe 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2013 E93 BMW 328i 335i 335is M3 - Convertible 2015+ F80 BMW M3 2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan 2014+ F34 BMW 328i xDrive GT - Gran Tourismo 2013+ F32 BMW 428i 435i 435i xDrive - Coupe 2013+ F33 BMW 428i Convertible 435i Convertible - Convertible 2014+ F36 BMW 428i Gran Coupe 435i Gran Coupe 2015+ F82 BMW M4 1997-2003 E39 BMW 525i 528i 530i 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 2011+ F10 BMW 535i 550i M5 2004-2010 E63 BMW 645ci 650i M6 2012+ F12 BMW 650i M6 2013+ F06 BMW M6 Gran Coupe 2013+ E84 BMW X1 xDrive28i 2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si 1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Tire Valve For TPMS Systems

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641919

Part#: AUL1SENSOR

In Stock

Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

Qty

Sale - Save 29%

$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

Universal BMW Jack Pad Red - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Rear Sway Bar Bushing - 25mm - Street

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22163393

Part#: PFR5-4013-25

Ships in 1 Business Day

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

When using PowerFlex Street Series Rear 25 mm Sway Bar Bushings for your BMW F80/F82F83, you will experience the benefits of a product that is made from the best material - polyurethane. You will feel: Enhanced Handling and Performance: Upgrading to Powerflex 25 mm rear sway bar bushings is like giving your car a secret performance boost. These bushings are designed to provide better control and stability during sharp turns and quick maneuvers. When you hit those curves, you'll feel your car hugging the road more confidently. Reduced Body Roll: One of the immediate benefits you'll notice is a reduction in body roll. Say goodbye to that sensation of leaning heavily when taking corners. The 14mm rear sway bar bushings work hard to keep your car's body level, resulting in a smoother and more comfortable ride. Improved Grip A better grip on the road is a game-changer, especially if you enjoy spirited driving or track days. With these beefier bushings, your rear tires will stay planted, offering improved traction. Whether you're accelerating out of a turn or holding a steady line, the enhanced grip is your new best friend. Sharper Steering Response: Tired of sluggish steering? These upgraded bushings can sharpen your car's steering response. You'll feel more in control of your vehicle, with quicker reactions to your steering inputs. It's like having a direct line of communication between you and the road. All Powerflex bushings come with a lifetime warranty Fits these BMW models: F80 M3 F82 M4 F83 M4

Show More Show Less

Powerflex Rear Diff Front Mounting Bushing - F8X M2,M3,M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554719

Part#: PFR5-4025BX4

In Stock

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 6 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMW Jack Pad Silver - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

BMS JB4 Port Injection Controller - F/G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21012590

Part#: F-G-PORTINJCONMO

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

Maad Maxx Rear Exhaust Section 3 Can Valve - With Black Tips ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6258362

Part#: 11-073B

Ships in 3 Business Days

$ 2,440.99 USD

Add to Wish List

Qty

$ 2,440.99 USD

Add to Wish List

The Active Autowerke F8X rear exhaust was carefully engineered to eliminate the unflattering sound of the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance.

Universal Jack Pad Adapter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122259

Part#: PF99-1000

Ships in 1 Business Day

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMS Elite Titanium Cone Seat Lug Nuts - M14x1.25 - 20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209837

Part#: BMS-ETLN20

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts

Show More Show Less

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Maad Maxx Rear Exhaust Section - 3 Can Valve

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641583

Part#: 11-073

Ships in 10 Business Days

$ 2,374.99 USD

Add to Wish List

Qty

$ 2,374.99 USD

Add to Wish List

Elevate the performance and sound of your BMW F80 M3 or F82 M4 with the Active Autowerke F8X rear exhaust, now available at Turner Motorsport. Crafted with over 30 years of expertise, this exhaust system is designed to eliminate the unflattering factory M3 and M4 exhaust sound while optimizing flow and resonance. The result is a deep, throaty growl, enhancing the overall driving experience. Active Autowerke's dedication to quality is evident in every aspect, from addressing the stock OEM exhaust sound to creating an exhaust worthy of an "M" car. The newly introduced "Max Max" valved version further enhances performance and sound, providing the ultimate solution for BMW enthusiasts.

Improved exhaust sound for BMW F80 M3 and F82 M4
Optimal flow and resonance
"Max Max" valved version for enhanced performance
Made in the USA
Significant power gains: 18+ WHP and 30+ LB-FT over stock*
Quicker turbo spool
Low, deep rumble for an enhanced driving experience
Flex joints reduce vibration
Double-canned muffler reduces resonance
Guaranteed fit for all F80 BMW M3/F82 BMW M4
Includes all necessary installation hardware

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Autel Universal Rubber TPMS Sensor - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

PowerAlign Wheel Mounting Guide Pin Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:16940516

Part#: PF99-510

Ships in 1 Business Day

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Universal Jack Pad Adapter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122257

Part#: PF99-1002

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Universal Jack Pad Adapter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5122258

Part#: PF99-1001

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

BMW F8X - Powerflex Radius Arm To Chassis Bushings - Caster Adjustabl...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21637213

Part#: PFF5-4001G

Ships in 1 Business Day

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

When you opt to enhance your BMW F80, F82, F83, or F87 with Radius Arm to Chassis Bushings, you unlock a multitude of advantages. These include: Enhanced Handling: Radius Arm to Chassis Bushings elevate your BMW's handling to a higher level, granting exceptional control, especially during demanding maneuvers and sharp corners. This translates to an improved sense of stability on the road. Reduced Vibration and Noise: These bushings excel at reducing vibrations and dampening noise, leading to a quieter and smoother driving experience. Your ride quality becomes more refined, enhancing overall comfort. Improved Steering Response: Bid farewell to unresponsive steering. Radius Arm to Chassis Bushings enhance your BMW's steering response, delivering precise and immediate control, akin to forging a direct connection with the road. Extended Component Lifespan: Opting for high-quality bushings extends the lifespan of various suspension components. They exhibit superior durability compared to stock bushings, which translates to fewer replacements and increased longevity. Enhanced Traction: Whether you're passionate about spirited driving or partake in track activities, these bushings provide superior traction. Your BMW maintains consistent contact with the road surface, allowing you to confidently explore your vehicle's performance limits. OE / OEM Cross Reference Numbers: 31122284531/ 31122284532 / 31122283579 Fits these BMW models: F80 - M3 F82 - M4 F87 - M2

Show More Show Less

BMW F80 M3 / F82 & F83 M4 Front Radius Arm To Chassis Bushings ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7828849

Part#: PFF5-4001

Ships in 1 Business Day

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

Replace your inner control arm bushings with performance Powerflex bushings to tighten up your control and improve stability. *Door Buster Special - New Product* This is a replacement part that uses the Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. If the control arm bushings on your vehicle are beginning to fail, it will become quickly apparent. Suspension noise will be drastically increased, there will be steering wheel shake when hitting road hazards, and the entire car will have an all around loose feel. This can also lead to premature tire failure as alignment is negatively affected. Replace your control arm bushings to give your entire suspension a tighter feel. Rattling over bumps, a loose feeling when driving, and play in the front wheels is the main indicator that your bushings may be failing. The stock rubber tends to get dry rotted, wear out, and cause play in the attachment point for the control arm. Replace yours when they wear out, or when replacing a control arm that didn't include these pieces.

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 20, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Akrapovic Slip-On Titanium Exhaust System - Titanium Or Carbon Fiber ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9383747

Part#: M-BM/T/8HKTPDK

In Stock at Vendor

Starting at $ 7,034.99 USD

Add to Wish List

Starting at $ 7,034.99 USD

Add to Wish List

This axle-back exhaust system is manufactured entirely from titanium. This makes this system ideal for cutting weight while being structurally stronger than the OE exhaust system. The engineers at Akrapovic have retained the dual mode exhaust flap control from the original system. This allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, at higher RPM (or when selecting the S mode on the gearshift) the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car. The included exhaust pipe tips are made completely from titanium OR a carbon fiber/titanium composite to add a high-end, refined style. Performance has not been left out of the design. The system dramatically reduces backpressure and is an excellent starting point for further engine tuning or turbo modifications. Even when installed on an otherwise stock vehicle a gain of 7.3 horsepower and 17.4 Nm/12.8 lbs-ft of torque are achieved. Furthermore, a weight reduction of 3.0 kg/6.6 lbs. is realized. The OEM catalysts are retained, so no reflashing of the ECU is required and the check engine light will not be triggered. Titanium muffler with integrated exhaust valves Statistics: +7.3 HP (at 4400 rpm) +17.4 Nm/12.8 lbs-ft of torque (at 2350 rpm) 3 kg/6.6 lbs. lighter than stock Not for sale outside the US or Canada.

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 20, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5567062

Part#: OCCN55-235VERT

Ships on Jul 20, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Key Features:

Benefits:

BMW F8X M2 M3 M4 Chassis Bracing

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results